hardware/fx2lafw/protocol.c

   1 /*
   2  * This file is part of the libsigrok project.
   3  *
   4  * Copyright (C) 2013 Bert Vermeulen <bert@biot.com>
   5  * Copyright (C) 2012 Joel Holdsworth <joel@airwebreathe.org.uk>
   6  *
   7  * This program is free software: you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License as published by
   9  * the Free Software Foundation, either version 3 of the License, or
  10  * (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  19  */
  20
  21 #include "protocol.h"
  22
  23 /* Protocol commands */
  24 #define CMD_GET_FW_VERSION              0xb0
  25 #define CMD_START                       0xb1
  26 #define CMD_GET_REVID_VERSION           0xb2
  27
  28 #define CMD_START_FLAGS_WIDE_POS        5
  29 #define CMD_START_FLAGS_CLK_SRC_POS     6
  30
  31 #define CMD_START_FLAGS_SAMPLE_8BIT     (0 << CMD_START_FLAGS_WIDE_POS)
  32 #define CMD_START_FLAGS_SAMPLE_16BIT    (1 << CMD_START_FLAGS_WIDE_POS)
  33
  34 #define CMD_START_FLAGS_CLK_30MHZ       (0 << CMD_START_FLAGS_CLK_SRC_POS)
  35 #define CMD_START_FLAGS_CLK_48MHZ       (1 << CMD_START_FLAGS_CLK_SRC_POS)
  36
  37 #pragma pack(push, 1)
  38
  39 struct version_info {
  40         uint8_t major;
  41         uint8_t minor;
  42 };
  43
  44 struct cmd_start_acquisition {
  45         uint8_t flags;
  46         uint8_t sample_delay_h;
  47         uint8_t sample_delay_l;
  48 };
  49
  50 #pragma pack(pop)
  51
  52 static int command_get_fw_version(libusb_device_handle *devhdl,
  53                                   struct version_info *vi)
  54 {
  55         int ret;
  56
  57         ret = libusb_control_transfer(devhdl, LIBUSB_REQUEST_TYPE_VENDOR |
  58                 LIBUSB_ENDPOINT_IN, CMD_GET_FW_VERSION, 0x0000, 0x0000,
  59                 (unsigned char *)vi, sizeof(struct version_info), 100);
  60
  61         if (ret < 0) {
  62                 sr_err("Unable to get version info: %s.",
  63                        libusb_error_name(ret));
  64                 return SR_ERR;
  65         }
  66
  67         return SR_OK;
  68 }
  69
  70 static int command_get_revid_version(struct sr_dev_inst *sdi, uint8_t *revid)
  71 {
  72         struct sr_usb_dev_inst *usb = sdi->conn;
  73         libusb_device_handle *devhdl = usb->devhdl;
  74         int ret;
  75
  76         ret = libusb_control_transfer(devhdl, LIBUSB_REQUEST_TYPE_VENDOR |
  77                 LIBUSB_ENDPOINT_IN, CMD_GET_REVID_VERSION, 0x0000, 0x0000,
  78                 revid, 1, 100);
  79
  80         if (ret < 0) {
  81                 sr_err("Unable to get REVID: %s.", libusb_error_name(ret));
  82                 return SR_ERR;
  83         }
  84
  85         return SR_OK;
  86 }
  87
  88 SR_PRIV int fx2lafw_command_start_acquisition(const struct sr_dev_inst *sdi)
  89 {
  90         struct dev_context *devc = sdi->priv;
  91         struct sr_usb_dev_inst *usb = sdi->conn;
  92         libusb_device_handle *devhdl = usb->devhdl;
  93         uint64_t samplerate = devc->cur_samplerate;
  94         gboolean samplewide = devc->sample_wide;
  95         struct cmd_start_acquisition cmd = { 0 };
  96         int delay = 0, ret;
  97
  98         /* Compute the sample rate. */
  99         if (samplewide && samplerate > MAX_16BIT_SAMPLE_RATE) {
 100                 sr_err("Unable to sample at %" PRIu64 "Hz "
 101                        "when collecting 16-bit samples.", samplerate);
 102                 return SR_ERR;
 103         }
 104
 105         if ((SR_MHZ(48) % samplerate) == 0) {
 106                 cmd.flags = CMD_START_FLAGS_CLK_48MHZ;
 107                 delay = SR_MHZ(48) / samplerate - 1;
 108                 if (delay > MAX_SAMPLE_DELAY)
 109                         delay = 0;
 110         }
 111
 112         if (delay == 0 && (SR_MHZ(30) % samplerate) == 0) {
 113                 cmd.flags = CMD_START_FLAGS_CLK_30MHZ;
 114                 delay = SR_MHZ(30) / samplerate - 1;
 115         }
 116
 117         sr_info("GPIF delay = %d, clocksource = %sMHz.", delay,
 118                 (cmd.flags & CMD_START_FLAGS_CLK_48MHZ) ? "48" : "30");
 119
 120         if (delay <= 0 || delay > MAX_SAMPLE_DELAY) {
 121                 sr_err("Unable to sample at %" PRIu64 "Hz.", samplerate);
 122                 return SR_ERR;
 123         }
 124
 125         cmd.sample_delay_h = (delay >> 8) & 0xff;
 126         cmd.sample_delay_l = delay & 0xff;
 127
 128         /* Select the sampling width. */
 129         cmd.flags |= samplewide ? CMD_START_FLAGS_SAMPLE_16BIT :
 130                 CMD_START_FLAGS_SAMPLE_8BIT;
 131
 132         /* Send the control message. */
 133         ret = libusb_control_transfer(devhdl, LIBUSB_REQUEST_TYPE_VENDOR |
 134                         LIBUSB_ENDPOINT_OUT, CMD_START, 0x0000, 0x0000,
 135                         (unsigned char *)&cmd, sizeof(cmd), 100);
 136         if (ret < 0) {
 137                 sr_err("Unable to send start command: %s.",
 138                        libusb_error_name(ret));
 139                 return SR_ERR;
 140         }
 141
 142         return SR_OK;
 143 }
 144
 145 /**
 146  * Check the USB configuration to determine if this is an fx2lafw device.
 147  *
 148  * @return TRUE if the device's configuration profile match fx2lafw
 149  *         configuration, FALSE otherwise.
 150  */
 151 SR_PRIV gboolean fx2lafw_check_conf_profile(libusb_device *dev)
 152 {
 153         struct libusb_device_descriptor des;
 154         struct libusb_device_handle *hdl;
 155         gboolean ret;
 156         unsigned char strdesc[64];
 157
 158         hdl = NULL;
 159         ret = FALSE;
 160         while (!ret) {
 161                 /* Assume the FW has not been loaded, unless proven wrong. */
 162                 if (libusb_get_device_descriptor(dev, &des) != 0)
 163                         break;
 164
 165                 if (libusb_open(dev, &hdl) != 0)
 166                         break;
 167
 168                 if (libusb_get_string_descriptor_ascii(hdl,
 169                     des.iManufacturer, strdesc, sizeof(strdesc)) < 0)
 170                         break;
 171                 if (strncmp((const char *)strdesc, "sigrok", 6))
 172                         break;
 173
 174                 if (libusb_get_string_descriptor_ascii(hdl,
 175                                 des.iProduct, strdesc, sizeof(strdesc)) < 0)
 176                         break;
 177                 if (strncmp((const char *)strdesc, "fx2lafw", 7))
 178                         break;
 179
 180                 /* If we made it here, it must be an fx2lafw. */
 181                 ret = TRUE;
 182         }
 183         if (hdl)
 184                 libusb_close(hdl);
 185
 186         return ret;
 187 }
 188
 189 SR_PRIV int fx2lafw_dev_open(struct sr_dev_inst *sdi, struct sr_dev_driver *di)
 190 {
 191         libusb_device **devlist;
 192         struct sr_usb_dev_inst *usb;
 193         struct libusb_device_descriptor des;
 194         struct dev_context *devc;
 195         struct drv_context *drvc;
 196         struct version_info vi;
 197         int ret, skip, i, device_count;
 198         uint8_t revid;
 199
 200         drvc = di->priv;
 201         devc = sdi->priv;
 202         usb = sdi->conn;
 203
 204         if (sdi->status == SR_ST_ACTIVE)
 205                 /* Device is already in use. */
 206                 return SR_ERR;
 207
 208         skip = 0;
 209         device_count = libusb_get_device_list(drvc->sr_ctx->libusb_ctx, &devlist);
 210         if (device_count < 0) {
 211                 sr_err("Failed to get device list: %s.",
 212                        libusb_error_name(device_count));
 213                 return SR_ERR;
 214         }
 215
 216         for (i = 0; i < device_count; i++) {
 217                 if ((ret = libusb_get_device_descriptor(devlist[i], &des))) {
 218                         sr_err("Failed to get device descriptor: %s.",
 219                                libusb_error_name(ret));
 220                         continue;
 221                 }
 222
 223                 if (des.idVendor != devc->profile->vid
 224                     || des.idProduct != devc->profile->pid)
 225                         continue;
 226
 227                 if (sdi->status == SR_ST_INITIALIZING) {
 228                         if (skip != sdi->index) {
 229                                 /* Skip devices of this type that aren't the one we want. */
 230                                 skip += 1;
 231                                 continue;
 232                         }
 233                 } else if (sdi->status == SR_ST_INACTIVE) {
 234                         /*
 235                          * This device is fully enumerated, so we need to find
 236                          * this device by vendor, product, bus and address.
 237                          */
 238                         if (libusb_get_bus_number(devlist[i]) != usb->bus
 239                                 || libusb_get_device_address(devlist[i]) != usb->address)
 240                                 /* This is not the one. */
 241                                 continue;
 242                 }
 243
 244                 if (!(ret = libusb_open(devlist[i], &usb->devhdl))) {
 245                         if (usb->address == 0xff)
 246                                 /*
 247                                  * First time we touch this device after FW
 248                                  * upload, so we don't know the address yet.
 249                                  */
 250                                 usb->address = libusb_get_device_address(devlist[i]);
 251                 } else {
 252                         sr_err("Failed to open device: %s.",
 253                                libusb_error_name(ret));
 254                         break;
 255                 }
 256
 257                 ret = command_get_fw_version(usb->devhdl, &vi);
 258                 if (ret != SR_OK) {
 259                         sr_err("Failed to get firmware version.");
 260                         break;
 261                 }
 262
 263                 ret = command_get_revid_version(sdi, &revid);
 264                 if (ret != SR_OK) {
 265                         sr_err("Failed to get REVID.");
 266                         break;
 267                 }
 268
 269                 /*
 270                  * Changes in major version mean incompatible/API changes, so
 271                  * bail out if we encounter an incompatible version.
 272                  * Different minor versions are OK, they should be compatible.
 273                  */
 274                 if (vi.major != FX2LAFW_REQUIRED_VERSION_MAJOR) {
 275                         sr_err("Expected firmware version %d.x, "
 276                                "got %d.%d.", FX2LAFW_REQUIRED_VERSION_MAJOR,
 277                                vi.major, vi.minor);
 278                         break;
 279                 }
 280
 281                 sdi->status = SR_ST_ACTIVE;
 282                 sr_info("Opened device %d on %d.%d, "
 283                         "interface %d, firmware %d.%d.",
 284                         sdi->index, usb->bus, usb->address,
 285                         USB_INTERFACE, vi.major, vi.minor);
 286
 287                 sr_info("Detected REVID=%d, it's a Cypress CY7C68013%s.",
 288                         revid, (revid != 1) ? " (FX2)" : "A (FX2LP)");
 289
 290                 break;
 291         }
 292         libusb_free_device_list(devlist, 1);
 293
 294         if (sdi->status != SR_ST_ACTIVE)
 295                 return SR_ERR;
 296
 297         return SR_OK;
 298 }
 299
 300 SR_PRIV struct dev_context *fx2lafw_dev_new(void)
 301 {
 302         struct dev_context *devc;
 303
 304         if (!(devc = g_try_malloc(sizeof(struct dev_context)))) {
 305                 sr_err("Device context malloc failed.");
 306                 return NULL;
 307         }
 308
 309         devc->profile = NULL;
 310         devc->fw_updated = 0;
 311         devc->cur_samplerate = 0;
 312         devc->limit_samples = 0;
 313         devc->sample_wide = FALSE;
 314         devc->stl = NULL;
 315
 316         return devc;
 317 }
 318
 319 SR_PRIV void fx2lafw_abort_acquisition(struct dev_context *devc)
 320 {
 321         int i;
 322
 323         devc->acq_aborted = TRUE;
 324
 325         for (i = devc->num_transfers - 1; i >= 0; i--) {
 326                 if (devc->transfers[i])
 327                         libusb_cancel_transfer(devc->transfers[i]);
 328         }
 329 }
 330
 331 static void finish_acquisition(struct sr_dev_inst *sdi)
 332 {
 333         struct sr_datafeed_packet packet;
 334         struct dev_context *devc;
 335
 336         devc = sdi->priv;
 337
 338         /* Terminate session. */
 339         packet.type = SR_DF_END;
 340         sr_session_send(sdi, &packet);
 341
 342         /* Remove fds from polling. */
 343         usb_source_remove(sdi->session, devc->ctx);
 344
 345         devc->num_transfers = 0;
 346         g_free(devc->transfers);
 347
 348         if (devc->stl) {
 349                 soft_trigger_logic_free(devc->stl);
 350                 devc->stl = NULL;
 351         }
 352 }
 353
 354 static void free_transfer(struct libusb_transfer *transfer)
 355 {
 356         struct sr_dev_inst *sdi;
 357         struct dev_context *devc;
 358         unsigned int i;
 359
 360         sdi = transfer->user_data;
 361         devc = sdi->priv;
 362
 363         g_free(transfer->buffer);
 364         transfer->buffer = NULL;
 365         libusb_free_transfer(transfer);
 366
 367         for (i = 0; i < devc->num_transfers; i++) {
 368                 if (devc->transfers[i] == transfer) {
 369                         devc->transfers[i] = NULL;
 370                         break;
 371                 }
 372         }
 373
 374         devc->submitted_transfers--;
 375         if (devc->submitted_transfers == 0)
 376                 finish_acquisition(sdi);
 377 }
 378
 379 static void resubmit_transfer(struct libusb_transfer *transfer)
 380 {
 381         int ret;
 382
 383         if ((ret = libusb_submit_transfer(transfer)) == LIBUSB_SUCCESS)
 384                 return;
 385
 386         sr_err("%s: %s", __func__, libusb_error_name(ret));
 387         free_transfer(transfer);
 388
 389 }
 390
 391 SR_PRIV void fx2lafw_receive_transfer(struct libusb_transfer *transfer)
 392 {
 393         struct sr_dev_inst *sdi;
 394         struct dev_context *devc;
 395         gboolean packet_has_error = FALSE;
 396         struct sr_datafeed_packet packet;
 397         struct sr_datafeed_logic logic;
 398         unsigned int num_samples;
 399         int trigger_offset, cur_sample_count, unitsize;
 400
 401         sdi = transfer->user_data;
 402         devc = sdi->priv;
 403
 404         /*
 405          * If acquisition has already ended, just free any queued up
 406          * transfer that come in.
 407          */
 408         if (devc->acq_aborted) {
 409                 free_transfer(transfer);
 410                 return;
 411         }
 412
 413         sr_info("receive_transfer(): status %d received %d bytes.",
 414                 transfer->status, transfer->actual_length);
 415
 416         /* Save incoming transfer before reusing the transfer struct. */
 417         unitsize = devc->sample_wide ? 2 : 1;
 418         cur_sample_count = transfer->actual_length / unitsize;
 419
 420         switch (transfer->status) {
 421         case LIBUSB_TRANSFER_NO_DEVICE:
 422                 fx2lafw_abort_acquisition(devc);
 423                 free_transfer(transfer);
 424                 return;
 425         case LIBUSB_TRANSFER_COMPLETED:
 426         case LIBUSB_TRANSFER_TIMED_OUT: /* We may have received some data though. */
 427                 break;
 428         default:
 429                 packet_has_error = TRUE;
 430                 break;
 431         }
 432
 433         if (transfer->actual_length == 0 || packet_has_error) {
 434                 devc->empty_transfer_count++;
 435                 if (devc->empty_transfer_count > MAX_EMPTY_TRANSFERS) {
 436                         /*
 437                          * The FX2 gave up. End the acquisition, the frontend
 438                          * will work out that the samplecount is short.
 439                          */
 440                         fx2lafw_abort_acquisition(devc);
 441                         free_transfer(transfer);
 442                 } else {
 443                         resubmit_transfer(transfer);
 444                 }
 445                 return;
 446         } else {
 447                 devc->empty_transfer_count = 0;
 448         }
 449
 450         if (devc->trigger_fired) {
 451                 if (devc->sent_samples < devc->limit_samples) {
 452                         /* Send the incoming transfer to the session bus. */
 453                         packet.type = SR_DF_LOGIC;
 454                         packet.payload = &logic;
 455                         if (devc->sent_samples + cur_sample_count > devc->limit_samples)
 456                                 num_samples = devc->limit_samples - devc->sent_samples;
 457                         else
 458                                 num_samples = cur_sample_count;
 459                         logic.length = num_samples * unitsize;
 460                         logic.unitsize = unitsize;
 461                         logic.data = transfer->buffer;
 462                         sr_session_send(devc->cb_data, &packet);
 463                         devc->sent_samples += num_samples;
 464                 }
 465         } else {
 466                 trigger_offset = soft_trigger_logic_check(devc->stl,
 467                                 transfer->buffer, transfer->actual_length);
 468                 if (trigger_offset > -1) {
 469                         packet.type = SR_DF_LOGIC;
 470                         packet.payload = &logic;
 471                         num_samples = cur_sample_count - trigger_offset;
 472                         if (devc->limit_samples &&
 473                                         num_samples > devc->limit_samples - devc->sent_samples)
 474                                 num_samples = devc->limit_samples - devc->sent_samples;
 475                         logic.length = num_samples * unitsize;
 476                         logic.unitsize = unitsize;
 477                         logic.data = transfer->buffer + trigger_offset * unitsize;
 478                         sr_session_send(devc->cb_data, &packet);
 479                         devc->sent_samples += num_samples;
 480
 481                         devc->trigger_fired = TRUE;
 482                 }
 483         }
 484
 485         if (devc->limit_samples && devc->sent_samples >= devc->limit_samples) {
 486                 fx2lafw_abort_acquisition(devc);
 487                 free_transfer(transfer);
 488         } else
 489                 resubmit_transfer(transfer);
 490 }
 491
 492 static unsigned int to_bytes_per_ms(unsigned int samplerate)
 493 {
 494         return samplerate / 1000;
 495 }
 496
 497 SR_PRIV size_t fx2lafw_get_buffer_size(struct dev_context *devc)
 498 {
 499         size_t s;
 500
 501         /*
 502          * The buffer should be large enough to hold 10ms of data and
 503          * a multiple of 512.
 504          */
 505         s = 10 * to_bytes_per_ms(devc->cur_samplerate);
 506         return (s + 511) & ~511;
 507 }
 508
 509 SR_PRIV unsigned int fx2lafw_get_number_of_transfers(struct dev_context *devc)
 510 {
 511         unsigned int n;
 512
 513         /* Total buffer size should be able to hold about 500ms of data. */
 514         n = (500 * to_bytes_per_ms(devc->cur_samplerate) /
 515                 fx2lafw_get_buffer_size(devc));
 516
 517         if (n > NUM_SIMUL_TRANSFERS)
 518                 return NUM_SIMUL_TRANSFERS;
 519
 520         return n;
 521 }
 522
 523 SR_PRIV unsigned int fx2lafw_get_timeout(struct dev_context *devc)
 524 {
 525         size_t total_size;
 526         unsigned int timeout;
 527
 528         total_size = fx2lafw_get_buffer_size(devc) *
 529                         fx2lafw_get_number_of_transfers(devc);
 530         timeout = total_size / to_bytes_per_ms(devc->cur_samplerate);
 531         return timeout + timeout / 4; /* Leave a headroom of 25% percent. */
 532 }