X-Git-Url: https://sigrok.org/gitweb/?a=blobdiff_plain;f=uart%2Fcyrustek_es51978%2FREADME;h=ed7cb52975cf1e3b658c619878cf91e4d9f35c59;hb=980c65ccac9f78131a004e7f2dafc5756bdde951;hp=a10c8fdbe1426ffe52c691a007fe2813c7a7acee;hpb=79edccdcf8920b0993c5bf55489f46715486e894;p=sigrok-dumps.git

diff --git a/uart/cyrustek_es51978/README b/uart/cyrustek_es51978/README
index a10c8fd..ed7cb52 100644
--- a/uart/cyrustek_es51978/README
+++ b/uart/cyrustek_es51978/README
@@ -1,5 +1,5 @@
 -------------------------------------------------------------------------------
-ES51978 based multimeter, serial communication
+Cyrustek ES51978 based multimeter, serial communication
 -------------------------------------------------------------------------------
 
 This is a set of example captures of the serial (UART) communication and
@@ -15,17 +15,17 @@ http://www.cyrustek.com.tw/spec/ES51978.pdf
 Logic analyzer setup
 --------------------
 
-The logic analyzer used was an OpenBench Logic Sniffer :
+The logic analyzer used was an OpenBench Logic Sniffer (at 100kHz):
 
-  Probe       RS232 Cable
-  -------------------------
+  Probe       RS232 cable
+  -----------------------
   0           RX
 
 
 Data
 ----
 
-Contains 3 samples sent by the multimeter set in resistance mode, mesuring
+Contains 3 samples sent by the multimeter set in resistance mode, measuring
 skin resistance, a few Mega Ohm.
 
 The sigrok command line used was: