X-Git-Url: https://sigrok.org/gitweb/?a=blobdiff_plain;f=src%2Fserial_hid_bu86x.c;fp=src%2Fserial_hid_bu86x.c;h=4009c3347a1ba84cdc84387adfbecfab53a4b130;hb=e4204b1757459a03c0a70849a659f27387edc295;hp=0000000000000000000000000000000000000000;hpb=8686b747cd40695c36f998603f6e853ee5eea883;p=libsigrok.git

diff --git a/src/serial_hid_bu86x.c b/src/serial_hid_bu86x.c
new file mode 100644
index 00000000..4009c334
--- /dev/null
+++ b/src/serial_hid_bu86x.c
@@ -0,0 +1,106 @@
+/*
+ * This file is part of the libsigrok project.
+ *
+ * Copyright (C) 2019 Gerhard Sittig <gerhard.sittig@gmx.net>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+ * This implements serial communication primitives for the Brymen BU-86X
+ * infrared adapter for handheld multimeters. The vendor's protocol spec
+ * http://brymen.com/product-html/images/DownloadList/ProtocolList/BM860-BM860s_List/BM860-BM860s-500000-count-dual-display-DMMs-protocol.pdf
+ * suggests that HID reports get communicated, but only report number 0
+ * is involved, which carries a mere byte stream in 8 byte chunks each.
+ * The frame format and bitrate are fixed, and need not get configured.
+ *
+ * The meter's packet consists of 24 bytes which get received in three
+ * HID reports. Packet reception gets initiated by sending a short HID
+ * report to the meter. It's uncertain which parts of this exchange are
+ * specific to the adapter and to the meter. Using the IR adapter with
+ * other devices, or using the meter with other cables/adapters may need
+ * a little more adjustment with respect to layering.
+ */
+
+#include <config.h>
+#include <glib.h>
+#include <libsigrok/libsigrok.h>
+#include "libsigrok-internal.h"
+#include "serial_hid.h"
+#include <string.h>
+
+/** @cond PRIVATE */
+#define LOG_PREFIX "serial-bu86x"
+/** @endcond */
+
+#ifdef HAVE_SERIAL_COMM
+#ifdef HAVE_LIBHIDAPI
+
+/**
+ * @file
+ *
+ * Support serial-over-HID, specifically the Brymen BU-86X infrared adapter.
+ */
+
+#define BU86X_MAX_BYTES_PER_REQUEST	8
+
+static const struct vid_pid_item vid_pid_items_bu86x[] = {
+	{ 0x0820, 0x0001, },
+	ALL_ZERO
+};
+
+static int bu86x_read_bytes(struct sr_serial_dev_inst *serial,
+	uint8_t *data, int space, unsigned int timeout)
+{
+	int rc;
+
+	if (space > BU86X_MAX_BYTES_PER_REQUEST)
+		space = BU86X_MAX_BYTES_PER_REQUEST;
+	rc = ser_hid_hidapi_get_data(serial, 0, data, space, timeout);
+	if (rc == SR_ERR_TIMEOUT)
+		return 0;
+	if (rc < 0)
+		return rc;
+	if (rc == 0)
+		return 0;
+	return rc;
+}
+
+static int bu86x_write_bytes(struct sr_serial_dev_inst *serial,
+	const uint8_t *data, int size)
+{
+	return ser_hid_hidapi_set_data(serial, 0, data, size, 0);
+}
+
+static struct ser_hid_chip_functions chip_bu86x = {
+	.chipname = "bu86x",
+	.chipdesc = "Brymen BU-86X",
+	.vid_pid_items = vid_pid_items_bu86x,
+	.max_bytes_per_request = BU86X_MAX_BYTES_PER_REQUEST,
+	/*
+	 * The IR adapter's communication parameters are fixed and need
+	 * not get configured. Just silently ignore the caller's spec.
+	 */
+	.set_params = std_dummy_set_params,
+	.read_bytes = bu86x_read_bytes,
+	.write_bytes = bu86x_write_bytes,
+};
+SR_PRIV struct ser_hid_chip_functions *ser_hid_chip_funcs_bu86x = &chip_bu86x;
+
+#else
+
+SR_PRIV struct ser_hid_chip_functions *ser_hid_chip_funcs_bu86x = NULL;
+
+#endif
+#endif