X-Git-Url: https://sigrok.org/gitweb/?a=blobdiff_plain;f=src%2Fhardware%2Fzketech-ebd-usb%2Fprotocol.c;h=980c8c04388b55dc2bed0a9b5630798066b006e7;hb=4df6f1743a9f0d27b954eb3b43c43a4ef38235cb;hp=f4939761d5c67ab31d1d8cc2f90229b3614b496e;hpb=c527132aec5ff8f2fc9646f360a7b0874301e4e7;p=libsigrok.git

diff --git a/src/hardware/zketech-ebd-usb/protocol.c b/src/hardware/zketech-ebd-usb/protocol.c
index f4939761..980c8c04 100644
--- a/src/hardware/zketech-ebd-usb/protocol.c
+++ b/src/hardware/zketech-ebd-usb/protocol.c
@@ -2,6 +2,7 @@
  * This file is part of the libsigrok project.
  *
  * Copyright (C) 2018 Sven Bursch-Osewold <sb_git@bursch.com>
+ * Copyright (C) 2019 King Kévin <kingkevin@cuvoodoo.info>
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -20,22 +21,491 @@
 #include <config.h>
 #include "protocol.h"
 
-SR_PRIV int zketech_ebd_usb_receive_data(int fd, int revents, void *cb_data)
+/* Log a byte-array as hex values. */
+static void log_buf(const char *message, uint8_t buf[], size_t count)
 {
-	const struct sr_dev_inst *sdi;
+	size_t i;
+	char buffer[count * 2 + 1];
+
+	for (i = 0; i < count; i++) {
+		sprintf(&buffer[2 * i], "%02X", buf[i]);
+	}
+
+	buffer[count * 2] = 0;
+
+	sr_dbg("%s: %s [%zu bytes]", message, buffer, count);
+}
+
+/* Send a command to the device. */
+static int send_cmd(struct sr_serial_dev_inst *serial, uint8_t buf[],
+	size_t count)
+{
+	int ret;
+
+	log_buf("Sending", buf, count);
+	for (size_t byte = 0; byte < count; byte++) {
+		ret = serial_write_blocking(serial, &buf[byte], 1, 0);
+		if (ret < 0) {
+			sr_err("Error sending command: %d.", ret);
+			return ret;
+		}
+		/*
+		 * Wait between bytes to prevent data loss at the receiving
+		 * side.
+		 */
+		g_usleep(10000);
+	}
+
+	return (ret == (int)count) ? SR_OK : SR_ERR;
+}
+
+/* Decode high byte and low byte into a float. */
+static float decode_value(uint8_t hi, uint8_t lo, float divisor)
+{
+	return ((float)hi * 240.0 + (float)lo) / divisor;
+}
+
+/* Encode a float into high byte and low byte. */
+static void encode_value(float current, uint8_t *hi, uint8_t *lo, float divisor)
+{
+	int value;
+
+	value = (int)(current * divisor);
+	sr_dbg("Value %d %d %d", value, value / 240, value % 240);
+	*hi = value / 240;
+	*lo = value % 240;
+}
+
+/* Send updated configuration values to the load. */
+static int send_cfg(struct sr_serial_dev_inst *serial, struct dev_context *devc)
+{
+	uint8_t send[] =
+		{ 0xfa, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8 };
+
+	encode_value(devc->current_limit, &send[2], &send[3], 1000.0);
+	encode_value(devc->uvc_threshold, &send[4], &send[5], 100.0);
+
+	send[8] = send[1] ^ send[2] ^ send[3] ^ send[4] ^ send[5]
+		^ send[6] ^ send[7];
+
+	return send_cmd(serial, send, 10);
+}
+
+/* Send the init/connect sequence; drive starts sending voltage and current. */
+SR_PRIV int ebd_init(struct sr_serial_dev_inst *serial, struct dev_context *devc)
+{
+	uint8_t init[] =
+		{ 0xfa, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0xf8 };
+
+	(void)devc;
+
+	return send_cmd(serial, init, 10);
+}
+
+/* Start the load functionality. */
+SR_PRIV int ebd_loadstart(struct sr_serial_dev_inst *serial,
+	struct dev_context *devc)
+{
+	int ret;
+	uint8_t start[] =
+		{ 0xfa, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xf8 };
+
+	encode_value(devc->current_limit, &start[2], &start[3], 1000.0);
+	encode_value(devc->uvc_threshold, &start[4], &start[5], 100.0);
+
+	start[8] = start[1] ^ start[2] ^ start[3] ^ start[4] ^ start[5]
+		^ start[6] ^ start[7];
+
+	sr_info("Activating load");
+	ret = send_cmd(serial, start, 10);
+	if (ret)
+		return ret;
+
+	sr_dbg("current limit: %.03f", devc->current_limit);
+	sr_dbg("under-voltage threshold: %.02f", devc->uvc_threshold);
+	if (ebd_current_is0(devc))
+		return SR_OK;
+
+	return ret;
+}
+
+/* Toggle the load functionality. */
+SR_PRIV int ebd_loadtoggle(struct sr_serial_dev_inst *serial,
+	struct dev_context *devc)
+{
+	uint8_t toggle[] =
+		{ 0xfa, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0xF8 };
+
+	(void) devc;
+
+	sr_info("Toggling load");
+	return send_cmd(serial, toggle, 10);
+}
+
+/* Stop the drive. */
+SR_PRIV int ebd_stop(struct sr_serial_dev_inst *serial, struct dev_context *devc)
+{
+	uint8_t stop[] =
+		{ 0xfa, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0xF8 };
+
+	(void) devc;
+
+	return send_cmd(serial, stop, 10);
+}
+
+/**
+ * Receive a complete message.
+ *
+ * @param[in] serial Serial port from which to read the packet
+ * @param[in] length Buffer length
+ * @param[out] buf Buffer to write packet to
+ *
+ * @return packet length (0 = timeout, -1 = error)
+ */
+SR_PRIV int ebd_read_message(struct sr_serial_dev_inst *serial, size_t length,
+	uint8_t *buf)
+{
+	int ret;
+	gboolean message_complete;
+	size_t turn, max_turns;
+	size_t message_length;
+
+	/* Check parameters. */
+	if (serial == NULL) {
+		sr_err("Serial device to receive packet missing.");
+		return -1;
+	}
+	if (length < 3) {
+		sr_err("Packet buffer not large enough.");
+		return -1;
+	}
+	if (buf == NULL) {
+		sr_err("Packet buffer missing.");
+		return -1;
+	}
+
+	message_complete = FALSE;
+	turn = 0;
+	max_turns = 200;
+	message_length = 0;
+	buf[message_length] = 0;
+
+	/* Try to read data. */
+	while (!message_complete && turn < max_turns) {
+		/* Wait for header byte. */
+		message_length = 0;
+		while (buf[0] != MSG_FRAME_BEGIN && turn < max_turns) {
+			ret = serial_read_blocking(serial, &buf[0], 1,
+				serial_timeout(serial, 1));
+			if (ret < 0) {
+				sr_err("Error %d reading byte.", ret);
+				return ret;
+			} else if (ret == 1) {
+				if (buf[message_length] != MSG_FRAME_BEGIN) {
+					sr_warn("Not frame begin byte %02x received",
+						buf[message_length]);
+				} else {
+					sr_dbg("Message header received: %02x",
+						buf[message_length]);
+					message_length += ret;
+				}
+			}
+			turn++;
+		}
+		/* Read until end byte. */
+		while (buf[message_length - 1] != MSG_FRAME_END
+			&& message_length < length && turn < max_turns) {
+
+			ret = serial_read_blocking(serial, &buf[message_length],
+				1, serial_timeout(serial, 1));
+			if (ret < 0) {
+				sr_err("Error %d reading byte.", ret);
+				return ret;
+			} else if (ret == 1) {
+				if (buf[message_length] == MSG_FRAME_BEGIN) {
+					sr_warn("Frame begin before end received");
+					message_length = 1;
+				} else {
+					sr_dbg("Message data received: %02x",
+						buf[message_length]);
+					message_length += ret;
+				}
+			}
+			turn++;
+		}
+		/* Verify frame. */
+		if (turn < max_turns) {
+			if (buf[message_length - 1] == MSG_FRAME_END) {
+				message_complete = TRUE;
+				sr_dbg("Message end received");
+			} else {
+				sr_warn("Frame end not received");
+			}
+		} else {
+			sr_warn("Invalid data and timeout");
+		}
+	}
+
+	if (message_complete && message_length > 2) {
+		ret = message_length;
+	} else if (turn >= max_turns) {
+		ret = 0;
+	} else {
+		ret = -1;
+	}
+	return ret;
+}
+
+static void ebd_send_value(const struct sr_dev_inst *sdi, struct sr_channel *ch,
+	float value, enum sr_mq mq, enum sr_unit unit, int digits)
+{
+	struct sr_datafeed_packet packet;
+	struct sr_datafeed_analog analog;
+	struct sr_analog_encoding encoding;
+	struct sr_analog_meaning meaning;
+	struct sr_analog_spec spec;
+
+	sr_analog_init(&analog, &encoding, &meaning, &spec, digits);
+	analog.meaning->channels = g_slist_append(NULL, ch);
+	analog.num_samples = 1;
+	analog.data = &value;
+	analog.meaning->mq = mq;
+	analog.meaning->unit = unit;
+	analog.meaning->mqflags = SR_MQFLAG_DC;
+
+	packet.type = SR_DF_ANALOG;
+	packet.payload = &analog;
+	sr_session_send(sdi, &packet);
+	g_slist_free(analog.meaning->channels);
+}
+
+SR_PRIV int ebd_receive_data(int fd, int revents, void *cb_data)
+{
+	struct sr_dev_inst *sdi;
 	struct dev_context *devc;
+	struct sr_serial_dev_inst *serial;
+	float current, current_limit;
+	float voltage, voltage_dp, voltage_dm, uvc_threshold;
+	uint8_t reply[MSG_MAX_LEN];
+	int ret, i;
+	uint8_t checksum;
 
+	(void)revents;
 	(void)fd;
 
 	if (!(sdi = cb_data))
-		return TRUE;
+		return FALSE;
 
 	if (!(devc = sdi->priv))
-		return TRUE;
+		return FALSE;
+
+	serial = sdi->conn;
+	current_limit = devc->current_limit;
+	uvc_threshold = devc->uvc_threshold;
+
+	ret = ebd_read_message(serial, MSG_MAX_LEN, reply);
+
+	/* Tests for correct message. */
+	if (ret == -1) {
+		sr_err("Can't receive messages");
+		return SR_ERR;
+	} else if (ret == 0) {
+		sr_err("No messages received");
+		devc->running = FALSE;
+		return 0;
+	} else if (ret != 19 ||
+		(reply[1] != 0x00 && reply[1] != 0x0a && reply[1] != 0x64 && reply[1] != 0x6e)) {
 
-	if (revents == G_IO_IN) {
-		/* TODO */
+		sr_info("Not measurement message received");
+		return ret;
 	}
 
+	/* Verify checksum */
+	checksum = 0;
+	for (i = 1; i < ret - 1; i++) {
+		checksum ^= reply[i];
+	}
+	if (checksum != 0) {
+		sr_warn("Invalid checksum");
+		/* Don't exit on wrong checksum, the device can recover */
+		return ret;
+	}
+
+	devc->running = TRUE;
+	if (reply[1] == 0x00 || reply[1] == 0x64)
+		devc->load_activated = FALSE;
+	else if (reply[1] == 0x0a || reply[1] == 0x6e)
+		devc->load_activated = TRUE;
+
+	/* Calculate values. */
+	current = decode_value(reply[2], reply[3], 10000.0);
+	voltage = decode_value(reply[4], reply[5], 1000.0);
+	voltage_dp = decode_value(reply[6], reply[7], 1000.0);
+	voltage_dm = decode_value(reply[8], reply[9], 1000.0);
+	if (reply[1] == 0x0a) {
+		current_limit = decode_value(reply[10], reply[11], 1000.0);
+		uvc_threshold = decode_value(reply[12], reply[13], 100.0);
+	}
+
+	sr_dbg("VBUS current %.04f A", current);
+	sr_dbg("VBUS voltage %.03f V", voltage);
+	sr_dbg("D+ voltage %.03f V", voltage_dp);
+	sr_dbg("D- voltage %.03f V", voltage_dm);
+	if (reply[1] == 0x0a) {
+		sr_dbg("Current limit %.03f A", current_limit);
+		sr_dbg("UVC threshold %.03f V", uvc_threshold);
+	}
+
+	/* Update load state. */
+	if (devc->load_activated && ebd_current_is0(devc)) {
+		ebd_loadtoggle(serial, devc);
+	} else if (!devc->load_activated && !ebd_current_is0(devc)) {
+		ebd_loadstart(serial, devc);
+	} else if (devc->load_activated &&
+		(current_limit != devc->current_limit || uvc_threshold != devc->uvc_threshold)) {
+
+		sr_dbg("Adjusting limit from %.03f A %.03f V to %.03f A %.03f V",
+			current_limit, uvc_threshold, devc->current_limit,
+			devc->uvc_threshold);
+		send_cfg(serial, devc);
+	}
+
+	/* Begin frame. */
+	std_session_send_df_frame_begin(sdi);
+
+	/* Values */
+	ebd_send_value(sdi, sdi->channels->data, voltage,
+		SR_MQ_VOLTAGE, SR_UNIT_VOLT, 3);
+	ebd_send_value(sdi, sdi->channels->next->data, current,
+		SR_MQ_CURRENT, SR_UNIT_AMPERE, 4);
+	ebd_send_value(sdi, sdi->channels->next->next->data, voltage_dp,
+		SR_MQ_VOLTAGE, SR_UNIT_VOLT, 3);
+	ebd_send_value(sdi, sdi->channels->next->next->next->data, voltage_dm,
+		SR_MQ_VOLTAGE, SR_UNIT_VOLT, 3);
+
+	/* End frame. */
+	std_session_send_df_frame_end(sdi);
+
+	sr_sw_limits_update_samples_read(&devc->limits, 1);
+	if (sr_sw_limits_check(&devc->limits))
+		sr_dev_acquisition_stop(sdi);
+
 	return TRUE;
 }
+
+SR_PRIV int ebd_get_current_limit(const struct sr_dev_inst *sdi, float *current)
+{
+	struct dev_context *devc;
+
+	if (!(devc = sdi->priv))
+		return SR_ERR;
+
+	g_mutex_lock(&devc->rw_mutex);
+	*current = devc->current_limit;
+	g_mutex_unlock(&devc->rw_mutex);
+
+	return SR_OK;
+}
+
+SR_PRIV int ebd_set_current_limit(const struct sr_dev_inst *sdi, float current)
+{
+	struct dev_context *devc;
+	int ret;
+
+	if (!(devc = sdi->priv))
+		return SR_ERR;
+
+	g_mutex_lock(&devc->rw_mutex);
+	devc->current_limit = current;
+
+	if (!devc->running) {
+		sr_dbg("Setting current limit later.");
+		g_mutex_unlock(&devc->rw_mutex);
+		return SR_OK;
+	}
+
+	sr_dbg("Setting current limit to %fV.", current);
+
+	if (devc->load_activated) {
+		if (ebd_current_is0(devc)) {
+			/* Stop load. */
+			ret = ebd_loadtoggle(sdi->conn, devc);
+		} else {
+			/* Send new current. */
+			ret = send_cfg(sdi->conn, devc);
+		}
+	} else {
+		if (ebd_current_is0(devc)) {
+			/* Nothing to do. */
+			ret = SR_OK;
+		} else {
+			/* Start load. */
+			ret = ebd_loadstart(sdi->conn, devc);
+		}
+	}
+
+	g_mutex_unlock(&devc->rw_mutex);
+
+	return ret;
+}
+
+SR_PRIV int ebd_get_uvc_threshold(const struct sr_dev_inst *sdi, float *voltage)
+{
+	struct dev_context *devc;
+
+	if (!(devc = sdi->priv))
+		return SR_ERR;
+
+	g_mutex_lock(&devc->rw_mutex);
+	*voltage = devc->uvc_threshold;
+	g_mutex_unlock(&devc->rw_mutex);
+
+	return SR_OK;
+}
+
+SR_PRIV int ebd_set_uvc_threshold(const struct sr_dev_inst *sdi, float voltage)
+{
+	struct dev_context *devc;
+	int ret;
+
+	if (!(devc = sdi->priv))
+		return SR_ERR;
+
+	g_mutex_lock(&devc->rw_mutex);
+	devc->uvc_threshold = voltage;
+
+	if (!devc->running) {
+		sr_dbg("Setting uvc threshold later.");
+		g_mutex_unlock(&devc->rw_mutex);
+		return SR_OK;
+	}
+
+	sr_dbg("Setting uvc threshold to %fV.", voltage);
+
+	if (devc->load_activated) {
+		if (ebd_current_is0(devc)) {
+			/* Stop load. */
+			ret = ebd_loadtoggle(sdi->conn, devc);
+		} else {
+			/* Send new current. */
+			ret = send_cfg(sdi->conn, devc);
+		}
+	} else {
+		if (ebd_current_is0(devc)) {
+			/* Nothing to do. */
+			ret = SR_OK;
+		} else {
+			/* Start load. */
+			ret = ebd_loadstart(sdi->conn, devc);
+		}
+	}
+
+	g_mutex_unlock(&devc->rw_mutex);
+
+	return ret;
+}
+
+SR_PRIV gboolean ebd_current_is0(struct dev_context *devc)
+{
+	return devc->current_limit < 0.001;
+}