X-Git-Url: https://sigrok.org/gitweb/?a=blobdiff_plain;f=src%2Fhardware%2Fsysclk-lwla%2Fapi.c;h=516726a3fe865b684cd5e292866914b9fcba8dd1;hb=8a66b0777ce093fcab54ae9cf89a645cc03c6731;hp=d093430d50dfec6027c27ca03f8467c5e58a0261;hpb=7ed808179f5542c903a476266c4b175a6f2a18a7;p=libsigrok.git diff --git a/src/hardware/sysclk-lwla/api.c b/src/hardware/sysclk-lwla/api.c index d093430d..516726a3 100644 --- a/src/hardware/sysclk-lwla/api.c +++ b/src/hardware/sysclk-lwla/api.c @@ -248,6 +248,40 @@ static int dev_clear(const struct sr_dev_driver *di) return std_dev_clear(di, &clear_dev_context); } +/* Drain any pending data from the USB transfer buffers on the device. + * This may be necessary e.g. after a crash or generally to clean up after + * an abnormal condition. + */ +static int drain_usb(struct sr_usb_dev_inst *usb, unsigned int endpoint) +{ + int drained, xfer_len; + int ret; + unsigned char buf[512]; + + const unsigned int drain_timeout_ms = 10; + + drained = 0; + do { + xfer_len = 0; + ret = libusb_bulk_transfer(usb->devhdl, endpoint, + buf, sizeof(buf), &xfer_len, + drain_timeout_ms); + drained += xfer_len; + } while (ret == LIBUSB_SUCCESS && xfer_len != 0); + + if (ret != LIBUSB_SUCCESS && ret != LIBUSB_ERROR_TIMEOUT) { + sr_err("Failed to drain USB endpoint %u: %s.", + endpoint & (LIBUSB_ENDPOINT_IN - 1), + libusb_error_name(ret)); + return SR_ERR; + } + if (drained > 0) { + sr_warn("Drained %d bytes from USB endpoint %u.", + drained, endpoint & (LIBUSB_ENDPOINT_IN - 1)); + } + return SR_OK; +} + /* Open and initialize device. */ static int dev_open(struct sr_dev_inst *sdi) @@ -274,12 +308,8 @@ static int dev_open(struct sr_dev_inst *sdi) if (ret != SR_OK) return ret; - /* Set the configuration twice to trigger a lightweight reset. - */ ret = libusb_set_configuration(usb->devhdl, USB_CONFIG); - if (ret == 0) - ret = libusb_set_configuration(usb->devhdl, USB_CONFIG); - if (ret != 0) { + if (ret != LIBUSB_SUCCESS) { sr_err("Failed to set USB configuration: %s.", libusb_error_name(ret)); sr_usb_close(usb); @@ -287,13 +317,17 @@ static int dev_open(struct sr_dev_inst *sdi) } ret = libusb_claim_interface(usb->devhdl, USB_INTERFACE); - if (ret < 0) { + if (ret != LIBUSB_SUCCESS) { sr_err("Failed to claim interface: %s.", libusb_error_name(ret)); sr_usb_close(usb); return SR_ERR; } + ret = drain_usb(usb, EP_REPLY); + if (ret != SR_OK) + return ret; + sdi->status = SR_ST_ACTIVE; devc->active_fpga_config = FPGA_NOCONF; @@ -560,13 +594,14 @@ static int prepare_trigger_masks(const struct sr_dev_inst *sdi) uint64_t trigger_mask; uint64_t trigger_values; uint64_t trigger_edge_mask; - uint64_t channel_bit; + uint64_t level_bit, type_bit; struct dev_context *devc; struct sr_trigger *trigger; struct sr_trigger_stage *stage; struct sr_trigger_match *match; const GSList *node; int idx; + enum sr_trigger_matches trg; devc = sdi->priv; @@ -591,30 +626,27 @@ static int prepare_trigger_masks(const struct sr_dev_inst *sdi) continue; /* ignore disabled channel */ idx = match->channel->index; + trg = match->match; if (idx < 0 || idx >= devc->model->num_channels) { sr_err("Channel index %d out of range.", idx); return SR_ERR_BUG; /* should not happen */ } - channel_bit = UINT64_C(1) << idx; - trigger_mask |= channel_bit; - - switch (match->match) { - case SR_TRIGGER_ZERO: - break; - case SR_TRIGGER_ONE: - trigger_values |= channel_bit; - break; - case SR_TRIGGER_RISING: - trigger_values |= channel_bit; - /* Fall through for edge mask. */ - case SR_TRIGGER_FALLING: - trigger_edge_mask |= channel_bit; - break; - default: + if (trg != SR_TRIGGER_ZERO + && trg != SR_TRIGGER_ONE + && trg != SR_TRIGGER_RISING + && trg != SR_TRIGGER_FALLING) { sr_err("Unsupported trigger match for CH%d.", idx + 1); return SR_ERR_ARG; } + level_bit = (trg == SR_TRIGGER_ONE + || trg == SR_TRIGGER_RISING) ? 1 : 0; + type_bit = (trg == SR_TRIGGER_RISING + || trg == SR_TRIGGER_FALLING) ? 1 : 0; + + trigger_mask |= UINT64_C(1) << idx; + trigger_values |= level_bit << idx; + trigger_edge_mask |= type_bit << idx; } devc->trigger_mask = trigger_mask; devc->trigger_values = trigger_values;