X-Git-Url: https://sigrok.org/gitweb/?a=blobdiff_plain;f=src%2Fhardware%2Fscpi-pps%2Fprofiles.c;h=cc5c0ce3c6bdd4dd637a68dc2a3a16c3411f8e4e;hb=34577da641d836dcf27433fee3c6384565ca7847;hp=ed776bceac1762386c509fbcf1cca285e824f7c6;hpb=da005885c8ebbf98772f75126764f758b2640d11;p=libsigrok.git diff --git a/src/hardware/scpi-pps/profiles.c b/src/hardware/scpi-pps/profiles.c index ed776bce..cc5c0ce3 100644 --- a/src/hardware/scpi-pps/profiles.c +++ b/src/hardware/scpi-pps/profiles.c @@ -26,26 +26,6 @@ #define CH_IDX(x) (1 << x) #define FREQ_DC_ONLY {0, 0, 0} -static const char *pps_vendors[][2] = { - { "RIGOL TECHNOLOGIES", "Rigol" }, - { "HEWLETT-PACKARD", "HP" }, - { "PHILIPS", "Philips" }, - { "Chroma ATE", "Chroma" }, - { "Agilent Technologies", "Agilent" }, -}; - -SR_PRIV const char *get_vendor(const char *raw_vendor) -{ - unsigned int i; - - for (i = 0; i < ARRAY_SIZE(pps_vendors); i++) { - if (!strcasecmp(raw_vendor, pps_vendors[i][0])) - return pps_vendors[i][1]; - } - - return raw_vendor; -} - static const uint32_t devopts_none[] = { }; /* Agilent/Keysight N5700A series */ @@ -95,6 +75,7 @@ static const struct scpi_command agilent_n5700a_cmd[] = { /* Current limit (CC mode) and OCP are set using the same command. */ { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_THRESHOLD, ":SOUR:CURR?" }, { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_THRESHOLD, ":SOUR:CURR %.6f" }, + ALL_ZERO }; /* Chroma 61600 series AC source */ @@ -140,8 +121,92 @@ static const struct scpi_command chroma_61604_cmd[] = { /* This is not a current limit mode. It is overcurrent protection. */ { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_THRESHOLD, ":SOUR:CURR:LIM?" }, { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_THRESHOLD, ":SOUR:CURR:LIM %.2f" }, + ALL_ZERO +}; + +/* Chroma 62000 series DC source */ + +static const uint32_t chroma_62000_devopts[] = { + SR_CONF_CONTINUOUS | SR_CONF_SET, +}; + +static const uint32_t chroma_62000_devopts_cg[] = { + SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET, + SR_CONF_OVER_CURRENT_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET, + SR_CONF_VOLTAGE | SR_CONF_GET, + SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, + SR_CONF_CURRENT | SR_CONF_GET, + SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, + SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET, +}; + +static const struct channel_group_spec chroma_62000_cg[] = { + { "1", CH_IDX(0), PPS_OVP | PPS_OCP }, +}; + +static const struct scpi_command chroma_62000_cmd[] = { + { SCPI_CMD_REMOTE, ":CONF:REM ON" }, + { SCPI_CMD_LOCAL, ":CONF:REM OFF" }, + { SCPI_CMD_BEEPER, ":CONF:BEEP?" }, + { SCPI_CMD_BEEPER_ENABLE, ":CONF:BEEP ON" }, + { SCPI_CMD_BEEPER_DISABLE, ":CONF:BEEP OFF" }, + { SCPI_CMD_GET_MEAS_VOLTAGE, ":MEAS:VOLT?" }, + { SCPI_CMD_GET_MEAS_CURRENT, ":MEAS:CURR?" }, + { SCPI_CMD_GET_MEAS_POWER, ":MEAS:POW?" }, + { SCPI_CMD_GET_VOLTAGE_TARGET, ":SOUR:VOLT?" }, + { SCPI_CMD_SET_VOLTAGE_TARGET, ":SOUR:VOLT %.2f" }, + { SCPI_CMD_GET_CURRENT_LIMIT, ":SOUR:CURR?" }, + { SCPI_CMD_SET_CURRENT_LIMIT, ":SOUR:CURR %.6f" }, + { SCPI_CMD_GET_OUTPUT_ENABLED, ":CONF:OUTP?" }, + { SCPI_CMD_SET_OUTPUT_ENABLE, ":CONF:OUTP ON" }, + { SCPI_CMD_SET_OUTPUT_DISABLE, ":CONF:OUTP OFF" }, + { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":SOUR:VOLT:PROT:HIGH?" }, + { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, ":SOUR:VOLT:PROT:HIGH %.6f" }, + { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_THRESHOLD, ":SOUR:CURR:PROT:HIGH?" }, + { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_THRESHOLD, ":SOUR:CURR:PROT:HIGH %.6f" }, + ALL_ZERO }; +static int chroma_62000p_probe_channels(struct sr_dev_inst *sdi, + struct sr_scpi_hw_info *hw_info, + struct channel_spec **channels, unsigned int *num_channels, + struct channel_group_spec **channel_groups, + unsigned int *num_channel_groups) +{ + unsigned int volts, amps; + struct channel_spec *channel; + + (void)sdi; + + sscanf(hw_info->model, "%*[^P]P-%u-%u", &volts, &s); + sr_dbg("Found device rated for %d V and %d A", volts, amps); + + if (volts > 600) { + sr_err("Probed max voltage of %u V is out of spec.", volts); + return SR_ERR_BUG; + } + + if (volts > 120) { + sr_err("Probed max current of %u A is out of spec.", amps); + return SR_ERR_BUG; + } + + channel = g_malloc0(sizeof(struct channel_spec)); + channel->name = "1"; + channel->voltage[0] = channel->current[0] = 0.0; + channel->voltage[1] = (float)volts; + channel->current[1] = (float)amps; + channel->voltage[2] = channel->current[2] = 0.01; + *channels = channel; + *num_channels = 1; + + *channel_groups = g_malloc(sizeof(struct channel_group_spec)); + **channel_groups = chroma_62000_cg[0]; + *num_channel_groups = 1; + + return SR_OK; +} + /* Rigol DP800 series */ static const uint32_t rigol_dp800_devopts[] = { SR_CONF_CONTINUOUS | SR_CONF_SET, @@ -224,6 +289,7 @@ static const struct scpi_command rigol_dp800_cmd[] = { { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ACTIVE, ":OUTP:OCP:QUES?" }, { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_THRESHOLD, ":OUTP:OCP:VAL?" }, { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_THRESHOLD, ":OUTP:OCP:VAL %.6f" }, + ALL_ZERO }; /* HP 663xx series */ @@ -254,6 +320,7 @@ static const struct scpi_command hp_6632b_cmd[] = { { SCPI_CMD_SET_VOLTAGE_TARGET, ":SOUR:VOLT %.6f" }, { SCPI_CMD_GET_CURRENT_LIMIT, ":SOUR:CURR?" }, { SCPI_CMD_SET_CURRENT_LIMIT, ":SOUR:CURR %.6f" }, + ALL_ZERO }; /* Philips/Fluke PM2800 series */ @@ -400,6 +467,7 @@ static const struct scpi_command philips_pm2800_cmd[] = { { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_ENABLE, ":SOUR:CURR:PROT:STAT ON" }, { SCPI_CMD_SET_OVER_CURRENT_PROTECTION_DISABLE, ":SOUR:CURR:PROT:STAT OFF" }, { SCPI_CMD_GET_OVER_CURRENT_PROTECTION_ACTIVE, ":SOUR:CURR:PROT:TRIP?" }, + ALL_ZERO }; SR_PRIV const struct scpi_pps pps_profiles[] = { @@ -409,7 +477,7 @@ SR_PRIV const struct scpi_pps pps_profiles[] = { ARRAY_AND_SIZE(agilent_n5700a_devopts_cg), ARRAY_AND_SIZE(agilent_n5767a_ch), ARRAY_AND_SIZE(agilent_n5767a_cg), - ARRAY_AND_SIZE(agilent_n5700a_cmd), + agilent_n5700a_cmd, .probe_channels = NULL, }, /* Chroma 61604 */ @@ -418,16 +486,25 @@ SR_PRIV const struct scpi_pps pps_profiles[] = { ARRAY_AND_SIZE(chroma_61604_devopts_cg), ARRAY_AND_SIZE(chroma_61604_ch), ARRAY_AND_SIZE(chroma_61604_cg), - ARRAY_AND_SIZE(chroma_61604_cmd), + chroma_61604_cmd, .probe_channels = NULL, }, + /* Chroma 62000 series */ + { "Chroma", "620[0-9]{2}P-[0-9]{2,3}-[0-9]{1,3}", 0, + ARRAY_AND_SIZE(chroma_62000_devopts), + ARRAY_AND_SIZE(chroma_62000_devopts_cg), + NULL, 0, + NULL, 0, + chroma_62000_cmd, + .probe_channels = chroma_62000p_probe_channels, + }, /* HP 6632B */ { "HP", "6632B", 0, ARRAY_AND_SIZE(hp_6632b_devopts), ARRAY_AND_SIZE(devopts_none), ARRAY_AND_SIZE(hp_6632b_ch), ARRAY_AND_SIZE(hp_6632b_cg), - ARRAY_AND_SIZE(hp_6632b_cmd), + hp_6632b_cmd, .probe_channels = NULL, }, @@ -437,7 +514,7 @@ SR_PRIV const struct scpi_pps pps_profiles[] = { ARRAY_AND_SIZE(rigol_dp800_devopts_cg), ARRAY_AND_SIZE(rigol_dp821a_ch), ARRAY_AND_SIZE(rigol_dp820_cg), - ARRAY_AND_SIZE(rigol_dp800_cmd), + rigol_dp800_cmd, .probe_channels = NULL, }, { "Rigol", "^DP831A$", PPS_OTP, @@ -445,7 +522,7 @@ SR_PRIV const struct scpi_pps pps_profiles[] = { ARRAY_AND_SIZE(rigol_dp800_devopts_cg), ARRAY_AND_SIZE(rigol_dp831_ch), ARRAY_AND_SIZE(rigol_dp830_cg), - ARRAY_AND_SIZE(rigol_dp800_cmd), + rigol_dp800_cmd, .probe_channels = NULL, }, { "Rigol", "^(DP832|DP832A)$", PPS_OTP, @@ -453,7 +530,7 @@ SR_PRIV const struct scpi_pps pps_profiles[] = { ARRAY_AND_SIZE(rigol_dp800_devopts_cg), ARRAY_AND_SIZE(rigol_dp832_ch), ARRAY_AND_SIZE(rigol_dp830_cg), - ARRAY_AND_SIZE(rigol_dp800_cmd), + rigol_dp800_cmd, .probe_channels = NULL, }, @@ -463,7 +540,7 @@ SR_PRIV const struct scpi_pps pps_profiles[] = { ARRAY_AND_SIZE(philips_pm2800_devopts_cg), NULL, 0, NULL, 0, - ARRAY_AND_SIZE(philips_pm2800_cmd), + philips_pm2800_cmd, philips_pm2800_probe_channels, }, };