X-Git-Url: https://sigrok.org/gitweb/?a=blobdiff_plain;f=src%2Fhardware%2Fscpi-pps%2Fprofiles.c;h=3787ec674cf65f51df06772bbecc964ca7d001ee;hb=22f76e188bb88831b52f062cb7383ba774fef684;hp=d9f98d0a85a176271526a8ca2fb3cacf29523ce0;hpb=b89e6db910e4a38779fa033aa04040cb020d3fd2;p=libsigrok.git diff --git a/src/hardware/scpi-pps/profiles.c b/src/hardware/scpi-pps/profiles.c index d9f98d0a..3787ec67 100644 --- a/src/hardware/scpi-pps/profiles.c +++ b/src/hardware/scpi-pps/profiles.c @@ -616,6 +616,10 @@ static const struct channel_spec hp_6632b_ch[] = { { "1", { 0, 20.475, 0.005, 3, 4 }, { 0, 5.1188, 0.00132, 4, 5 }, { 0, 104.80743 }, FREQ_DC_ONLY, { 0, 22, 0.1 }, NO_OCP_LIMITS }, }; +static const struct channel_spec hp_66312a_ch[] = { + { "1", { 0, 20.475, 0.0001, 4, 5 }, { 0, 2.0475, 0.0001, 4, 5 }, { 0, 41.92256 }, FREQ_DC_ONLY, { 0, 22, 0.01 }, NO_OCP_LIMITS }, +}; + static const struct channel_spec hp_66332a_ch[] = { { "1", { 0, 20.475, 0.005, 3, 4 }, { 0, 5.1188, 0.00132, 4, 5 }, { 0, 104.80743 }, FREQ_DC_ONLY, { 0, 22, 0.1 }, NO_OCP_LIMITS }, }; @@ -1033,6 +1037,88 @@ static const struct scpi_command rs_hmc8043_cmd[] = { ALL_ZERO }; +static const uint32_t rs_hmp4040_devopts[] = { + SR_CONF_CONTINUOUS, + SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET, + SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET, +}; + +static const uint32_t rs_hmp4040_devopts_cg[] = { + SR_CONF_OVER_VOLTAGE_PROTECTION_ENABLED | SR_CONF_GET, + SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE | SR_CONF_GET, + SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET, + SR_CONF_VOLTAGE | SR_CONF_GET, + SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, + SR_CONF_CURRENT | SR_CONF_GET, + SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, + SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET, + SR_CONF_OVER_TEMPERATURE_PROTECTION_ACTIVE | SR_CONF_GET, + SR_CONF_REGULATION | SR_CONF_GET, +}; + +static const struct channel_spec rs_hmp4040_ch[] = { + { "1", { 0, 32.050, 0.001, 3, 4 }, { 0.001, 10.01, 0.0001, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, + { "2", { 0, 32.050, 0.001, 3, 4 }, { 0.001, 10.01, 0.0001, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, + { "3", { 0, 32.050, 0.001, 3, 4 }, { 0.001, 10.01, 0.0001, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, + { "4", { 0, 32.050, 0.001, 3, 4 }, { 0.001, 10.01, 0.0001, 3, 4 }, { 0, 0, 0, 0, 4 }, FREQ_DC_ONLY, NO_OVP_LIMITS, NO_OCP_LIMITS }, +}; + +static const struct channel_group_spec rs_hmp4040_cg[] = { + { "1", CH_IDX(0), PPS_OVP | PPS_OTP, SR_MQFLAG_DC }, + { "2", CH_IDX(1), PPS_OVP | PPS_OTP, SR_MQFLAG_DC }, + { "3", CH_IDX(2), PPS_OVP | PPS_OTP, SR_MQFLAG_DC }, + { "4", CH_IDX(3), PPS_OVP | PPS_OTP, SR_MQFLAG_DC }, +}; + +/* + * Developer's note: Currently unused device commands. Some of them + * are not in use because SCPI_CMD codes are not defined yet. + * OUTP:GEN + * VOLT? MAX, CURR? MAX + * VOLT:PROT:CLE (could set SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE) + * VOLT:PROT:MODE + * FUSE:STAT, FUSE:TRIP?, FUSE:LINK, FUSE:UNL + * ARB:... + * SYST:LOC, SYST:REM, SYST:RWL, SYST:MIX + * SYST:BEEP:IMM + */ +static const struct scpi_command rs_hmp4040_cmd[] = { + { SCPI_CMD_SELECT_CHANNEL, "INST:NSEL %s" }, + { SCPI_CMD_GET_MEAS_VOLTAGE, "MEAS:VOLT?" }, + { SCPI_CMD_GET_MEAS_CURRENT, "MEAS:CURR?" }, + { SCPI_CMD_GET_VOLTAGE_TARGET, "VOLT?" }, + { SCPI_CMD_SET_VOLTAGE_TARGET, "VOLT %.6f" }, + { SCPI_CMD_GET_CURRENT_LIMIT, "CURR?" }, + { SCPI_CMD_SET_CURRENT_LIMIT, "CURR %.6f" }, + { SCPI_CMD_GET_OUTPUT_ENABLED, "OUTP?" }, + { SCPI_CMD_SET_OUTPUT_ENABLE, "OUTP ON" }, + { SCPI_CMD_SET_OUTPUT_DISABLE, "OUTP OFF" }, + { SCPI_CMD_GET_OUTPUT_REGULATION, "STAT:QUES:INST:ISUM%s:COND?" }, + { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_ACTIVE, "VOLT:PROT:TRIP?" }, + { SCPI_CMD_GET_OVER_VOLTAGE_PROTECTION_THRESHOLD, "VOLT:PROT:LEV?" }, + { SCPI_CMD_SET_OVER_VOLTAGE_PROTECTION_THRESHOLD, "VOLT:PROT:LEV %.6f" }, + { SCPI_CMD_GET_OVER_TEMPERATURE_PROTECTION_ACTIVE, "STAT:QUES:INST:ISUM%s:COND?" }, + ALL_ZERO +}; + +static int rs_hmp_init_acquisition(const struct sr_dev_inst *sdi) +{ + struct sr_scpi_dev_inst *scpi; + int ret; + + scpi = sdi->conn; + + /* + * Sets the system to remote state. The front panel and remote + * control are possible simultaneously (mixed mode). + */ + ret = sr_scpi_send(scpi, "SYST:MIX"); + if (ret != SR_OK) + return ret; + + return SR_OK; +} + SR_PRIV const struct scpi_pps pps_profiles[] = { /* Agilent N5763A */ { "Agilent", "N5763A", SCPI_DIALECT_UNKNOWN, 0, @@ -1220,6 +1306,18 @@ SR_PRIV const struct scpi_pps pps_profiles[] = { hp_6630b_update_status, }, + /* HP 66312A */ + { "HP", "66312A", SCPI_DIALECT_HP_66XXB, PPS_OTP, + ARRAY_AND_SIZE(hp_6630b_devopts), + ARRAY_AND_SIZE(hp_6630b_devopts_cg), + ARRAY_AND_SIZE(hp_66312a_ch), + ARRAY_AND_SIZE(hp_6630b_cg), + hp_6630b_cmd, + .probe_channels = NULL, + hp_6630b_init_acquisition, + hp_6630b_update_status, + }, + /* HP 66332A */ { "HP", "66332A", SCPI_DIALECT_HP_66XXB, PPS_OTP, ARRAY_AND_SIZE(hp_6630b_devopts), @@ -1333,6 +1431,49 @@ SR_PRIV const struct scpi_pps pps_profiles[] = { .init_acquisition = NULL, .update_status = NULL, }, + + /* Hameg / Rohde&Schwarz HMP4000 series */ + /* TODO Match on regex, pass scpi_pps item to .probe_channels(). */ + { "HAMEG", "HMP4030", SCPI_DIALECT_HMP, 0, + ARRAY_AND_SIZE(rs_hmp4040_devopts), + ARRAY_AND_SIZE(rs_hmp4040_devopts_cg), + rs_hmp4040_ch, 3, + rs_hmp4040_cg, 3, + rs_hmp4040_cmd, + .probe_channels = NULL, + .init_acquisition = rs_hmp_init_acquisition, + .update_status = NULL, + }, + { "HAMEG", "HMP4040", SCPI_DIALECT_HMP, 0, + ARRAY_AND_SIZE(rs_hmp4040_devopts), + ARRAY_AND_SIZE(rs_hmp4040_devopts_cg), + ARRAY_AND_SIZE(rs_hmp4040_ch), + ARRAY_AND_SIZE(rs_hmp4040_cg), + rs_hmp4040_cmd, + .probe_channels = NULL, + .init_acquisition = rs_hmp_init_acquisition, + .update_status = NULL, + }, + { "ROHDE&SCHWARZ", "HMP4030", SCPI_DIALECT_HMP, 0, + ARRAY_AND_SIZE(rs_hmp4040_devopts), + ARRAY_AND_SIZE(rs_hmp4040_devopts_cg), + rs_hmp4040_ch, 3, + rs_hmp4040_cg, 3, + rs_hmp4040_cmd, + .probe_channels = NULL, + .init_acquisition = rs_hmp_init_acquisition, + .update_status = NULL, + }, + { "ROHDE&SCHWARZ", "HMP4040", SCPI_DIALECT_HMP, 0, + ARRAY_AND_SIZE(rs_hmp4040_devopts), + ARRAY_AND_SIZE(rs_hmp4040_devopts_cg), + ARRAY_AND_SIZE(rs_hmp4040_ch), + ARRAY_AND_SIZE(rs_hmp4040_cg), + rs_hmp4040_cmd, + .probe_channels = NULL, + .init_acquisition = rs_hmp_init_acquisition, + .update_status = NULL, + }, }; SR_PRIV unsigned int num_pps_profiles = ARRAY_SIZE(pps_profiles);