X-Git-Url: https://sigrok.org/gitweb/?a=blobdiff_plain;f=src%2Fhardware%2Fopenbench-logic-sniffer%2Fapi.c;h=ddd33e1482a3e4e2f6c3616bd432d98a7f4f827b;hb=32ba0d80054df01767ec323c621ab1c6bc5f310c;hp=cb55bf19a6f891b0cc3abe24c4bbf8c4f7215cec;hpb=c368e6f3d248a73d69cd0c2c4a7c88a92def55e3;p=libsigrok.git
diff --git a/src/hardware/openbench-logic-sniffer/api.c b/src/hardware/openbench-logic-sniffer/api.c
index cb55bf19..ddd33e14 100644
--- a/src/hardware/openbench-logic-sniffer/api.c
+++ b/src/hardware/openbench-logic-sniffer/api.c
@@ -17,8 +17,8 @@
* along with this program. If not, see .
*/
+#include
#include "protocol.h"
-#include
#define SERIALCOMM "115200/8n1"
@@ -70,11 +70,10 @@ static const char *patterns[] = {
};
/* Channels are numbered 0-31 (on the PCB silkscreen). */
-SR_PRIV const char *ols_channel_names[NUM_CHANNELS + 1] = {
+SR_PRIV const char *ols_channel_names[] = {
"0", "1", "2", "3", "4", "5", "6", "7", "8", "9", "10", "11", "12",
"13", "14", "15", "16", "17", "18", "19", "20", "21", "22", "23",
"24", "25", "26", "27", "28", "29", "30", "31",
- NULL,
};
/* Default supported samplerates, can be overridden by device metadata. */
@@ -84,29 +83,28 @@ static const uint64_t samplerates[] = {
SR_HZ(1),
};
+#define RESPONSE_DELAY_US (10 * 1000)
+
SR_PRIV struct sr_dev_driver ols_driver_info;
-static struct sr_dev_driver *di = &ols_driver_info;
-static int init(struct sr_context *sr_ctx)
+static int init(struct sr_dev_driver *di, struct sr_context *sr_ctx)
{
return std_init(sr_ctx, di, LOG_PREFIX);
}
-static GSList *scan(GSList *options)
+static GSList *scan(struct sr_dev_driver *di, GSList *options)
{
struct sr_config *src;
struct sr_dev_inst *sdi;
struct drv_context *drvc;
- struct dev_context *devc;
- struct sr_channel *ch;
struct sr_serial_dev_inst *serial;
- GPollFD probefd;
GSList *l, *devices;
- int ret, i;
+ int ret;
+ unsigned int i;
const char *conn, *serialcomm;
char buf[8];
- drvc = di->priv;
+ drvc = di->context;
devices = NULL;
@@ -125,11 +123,10 @@ static GSList *scan(GSList *options)
if (!conn)
return NULL;
- if (serialcomm == NULL)
+ if (!serialcomm)
serialcomm = SERIALCOMM;
- if (!(serial = sr_serial_dev_inst_new(conn, serialcomm)))
- return NULL;
+ serial = sr_serial_dev_inst_new(conn, serialcomm);
/* The discovery procedure is like this: first send the Reset
* command (0x00) 5 times, since the device could be anywhere
@@ -155,28 +152,35 @@ static GSList *scan(GSList *options)
}
send_shortcommand(serial, CMD_ID);
- /* Wait 10ms for a response. */
- g_usleep(10000);
+ g_usleep(RESPONSE_DELAY_US);
- sp_get_port_handle(serial->data, &probefd.fd);
- probefd.events = G_IO_IN;
- g_poll(&probefd, 1, 1);
-
- if (probefd.revents != G_IO_IN)
+ if (sp_input_waiting(serial->data) == 0) {
+ sr_dbg("Didn't get any reply.");
return NULL;
- if (serial_read_blocking(serial, buf, 4, serial_timeout(serial, 4)) != 4)
+ }
+
+ ret = serial_read_blocking(serial, buf, 4, serial_timeout(serial, 4));
+ if (ret != 4) {
+ sr_err("Invalid reply (expected 4 bytes, got %d).", ret);
return NULL;
- if (strncmp(buf, "1SLO", 4) && strncmp(buf, "1ALS", 4))
+ }
+
+ if (strncmp(buf, "1SLO", 4) && strncmp(buf, "1ALS", 4)) {
+ sr_err("Invalid reply (expected '1SLO' or '1ALS', got "
+ "'%c%c%c%c').", buf[0], buf[1], buf[2], buf[3]);
return NULL;
+ }
/* Definitely using the OLS protocol, check if it supports
* the metadata command.
*/
send_shortcommand(serial, CMD_METADATA);
- if (g_poll(&probefd, 1, 10) > 0) {
+
+ g_usleep(RESPONSE_DELAY_US);
+
+ if (sp_input_waiting(serial->data) != 0) {
/* Got metadata. */
sdi = get_metadata(serial);
- devc = sdi->priv;
} else {
/* Not an OLS -- some other board that uses the sump protocol. */
sr_info("Device does not support metadata.");
@@ -186,13 +190,10 @@ static GSList *scan(GSList *options)
sdi->model = g_strdup("Logic Analyzer");
sdi->version = g_strdup("v1.0");
sdi->driver = di;
- for (i = 0; i < 32; i++) {
- ch = sr_channel_new(i, SR_CHANNEL_LOGIC, TRUE,
+ for (i = 0; i < ARRAY_SIZE(ols_channel_names); i++)
+ sr_channel_new(sdi, i, SR_CHANNEL_LOGIC, TRUE,
ols_channel_names[i]);
- sdi->channels = g_slist_append(sdi->channels, ch);
- }
- devc = ols_dev_new();
- sdi->priv = devc;
+ sdi->priv = ols_dev_new();
}
/* Configure samplerate and divider. */
if (ols_set_samplerate(sdi, DEFAULT_SAMPLERATE) != SR_OK)
@@ -209,12 +210,12 @@ static GSList *scan(GSList *options)
return devices;
}
-static GSList *dev_list(void)
+static GSList *dev_list(const struct sr_dev_driver *di)
{
- return ((struct drv_context *)(di->priv))->instances;
+ return ((struct drv_context *)(di->context))->instances;
}
-static int cleanup(void)
+static int cleanup(const struct sr_dev_driver *di)
{
return std_dev_clear(di, NULL);
}
@@ -290,10 +291,9 @@ static int config_set(uint32_t key, GVariant *data, const struct sr_dev_inst *sd
break;
case SR_CONF_CAPTURE_RATIO:
devc->capture_ratio = g_variant_get_uint64(data);
- if (devc->capture_ratio < 0 || devc->capture_ratio > 100) {
- devc->capture_ratio = 0;
+ if (devc->capture_ratio < 0 || devc->capture_ratio > 100)
ret = SR_ERR;
- } else
+ else
ret = SR_OK;
break;
case SR_CONF_EXTERNAL_CLOCK:
@@ -573,7 +573,10 @@ static int dev_acquisition_start(const struct sr_dev_inst *sdi,
/* Send header packet to the session bus. */
std_session_send_df_header(cb_data, LOG_PREFIX);
- serial_source_add(sdi->session, serial, G_IO_IN, -1,
+ /* If the device stops sending for longer than it takes to send a byte,
+ * that means it's finished. But wait at least 100 ms to be safe.
+ */
+ serial_source_add(sdi->session, serial, G_IO_IN, 100,
ols_receive_data, cb_data);
return SR_OK;
@@ -604,5 +607,5 @@ SR_PRIV struct sr_dev_driver ols_driver_info = {
.dev_close = std_serial_dev_close,
.dev_acquisition_start = dev_acquisition_start,
.dev_acquisition_stop = dev_acquisition_stop,
- .priv = NULL,
+ .context = NULL,
};