X-Git-Url: https://sigrok.org/gitweb/?a=blobdiff_plain;f=src%2Fhardware%2Fkingst-la2016%2Fprotocol.h;h=8ea01809e439ccc7aa4743a0af02b9a9897db2c8;hb=22cb067ab034ab95111f5bc388413dd244f64492;hp=7518cb759f9a768cb373a78ca885fdfaa0f6d652;hpb=c3d4003710edfe193de072f6032401bcba098672;p=libsigrok.git diff --git a/src/hardware/kingst-la2016/protocol.h b/src/hardware/kingst-la2016/protocol.h index 7518cb75..8ea01809 100644 --- a/src/hardware/kingst-la2016/protocol.h +++ b/src/hardware/kingst-la2016/protocol.h @@ -23,28 +23,45 @@ #ifndef LIBSIGROK_HARDWARE_KINGST_LA2016_PROTOCOL_H #define LIBSIGROK_HARDWARE_KINGST_LA2016_PROTOCOL_H -#include -#include #include -#include "libsigrok-internal.h" +#include -#define LOG_PREFIX "kingst-la2016" +#define LOG_PREFIX "kingst-la2016" #define LA2016_VID 0x77a1 #define LA2016_PID 0x01a2 #define USB_INTERFACE 0 #define USB_CONFIGURATION 1 -#define LA2016_BULK_MAX 8388608 +/* + * On Windows sigrok uses WinUSB RAW_IO policy which requires the + * USB transfer buffer size to be a multiple of the endpoint max packet + * size, which is 512 bytes in this case. Also, the maximum allowed size + * of the transfer buffer is normally read from WinUSB_GetPipePolicy API + * but libusb does not expose this function. Typically, max size is 2MB. + */ +#define LA2016_EP6_PKTSZ 512 /* Max packet size of USB endpoint 6. */ +#define LA2016_USB_BUFSZ (256 * 2 * LA2016_EP6_PKTSZ) /* 256KiB buffer. */ -#define MAX_RENUM_DELAY_MS 3000 -#define DEFAULT_TIMEOUT_MS 200 +/* USB communication timeout during regular operation. */ +#define DEFAULT_TIMEOUT_MS 200 + +/* + * Check for MCU firmware to take effect after upload. Check the device + * presence for a maximum period of time, delay between checks in that + * phase. Allow for the device to vanish after upload and before checks, + * to not mistake its earlier incarnation for the successful operation + * of the most recently loaded firmware. + */ +#define RENUM_CHECK_PERIOD_MS 3000 +#define RENUM_GONE_DELAY_MS 1800 +#define RENUM_POLL_INTERVAL_MS 200 -#define LA2016_THR_VOLTAGE_MIN 0.40 -#define LA2016_THR_VOLTAGE_MAX 4.00 +#define LA2016_THR_VOLTAGE_MIN 0.40 +#define LA2016_THR_VOLTAGE_MAX 4.00 -#define LA2016_NUM_SAMPLES_MIN 256 -#define LA2016_NUM_SAMPLES_MAX (10UL * 1000 * 1000 * 1000) +#define LA2016_NUM_SAMPLES_MIN 256 +#define LA2016_NUM_SAMPLES_MAX (10UL * 1000 * 1000 * 1000) typedef struct pwm_setting_dev { uint32_t period; @@ -64,8 +81,8 @@ typedef struct capture_info { uint32_t write_pos; } capture_info_t; -#define NUM_PACKETS_IN_CHUNK 5 -#define TRANSFER_PACKET_LENGTH 16 +#define NUM_PACKETS_IN_CHUNK 5 +#define TRANSFER_PACKET_LENGTH 16 typedef struct pwm_setting { uint8_t enabled; @@ -75,11 +92,13 @@ typedef struct pwm_setting { struct dev_context { struct sr_context *ctx; + uint64_t fw_uploaded; - int64_t fw_updated; + /* User specified parameters. */ pwm_setting_t pwm_setting[2]; unsigned int threshold_voltage_idx; float threshold_voltage; + uint64_t max_samplerate; uint64_t cur_samplerate; uint64_t limit_samples; uint64_t capture_ratio; @@ -88,10 +107,10 @@ struct dev_context { uint32_t bitstream_size; - /* derived stuff */ + /* Values derived from user specs. */ uint64_t pre_trigger_size; - /* state after sampling */ + /* Internal acquisition and download state. */ int had_triggers_configured; int have_trigger; int transfer_finished; @@ -108,13 +127,12 @@ struct dev_context { struct libusb_transfer *transfer; }; -SR_PRIV int la2016_upload_firmware(struct sr_context *sr_ctx, libusb_device *dev, uint16_t product_id); +SR_PRIV int la2016_upload_firmware(struct sr_context *sr_ctx, + libusb_device *dev, uint16_t product_id); SR_PRIV int la2016_setup_acquisition(const struct sr_dev_inst *sdi); SR_PRIV int la2016_start_acquisition(const struct sr_dev_inst *sdi); -SR_PRIV int la2016_stop_acquisition(const struct sr_dev_inst *sdi); SR_PRIV int la2016_abort_acquisition(const struct sr_dev_inst *sdi); -SR_PRIV int la2016_has_triggered(const struct sr_dev_inst *sdi); -SR_PRIV int la2016_start_retrieval(const struct sr_dev_inst *sdi, libusb_transfer_cb_fn cb); +SR_PRIV int la2016_receive_data(int fd, int revents, void *cb_data); SR_PRIV int la2016_init_device(const struct sr_dev_inst *sdi); SR_PRIV int la2016_deinit_device(const struct sr_dev_inst *sdi);