X-Git-Url: https://sigrok.org/gitweb/?a=blobdiff_plain;f=src%2Fhardware%2Fhantek-dso%2Fprotocol.h;h=21131613144c3d4dd82480c2ff26746720f9154e;hb=dbc519f72038baff3bc026e45efa683e95880c19;hp=20aaebdce89a40595d20c5eec744e893f8ffd782;hpb=b3fd09937ce099d5a7086ff6bbdfa1b4f371cabd;p=libsigrok.git

diff --git a/src/hardware/hantek-dso/protocol.h b/src/hardware/hantek-dso/protocol.h
index 20aaebdc..21131613 100644
--- a/src/hardware/hantek-dso/protocol.h
+++ b/src/hardware/hantek-dso/protocol.h
@@ -37,9 +37,10 @@
 #define DEFAULT_VOLTAGE         VDIV_500MV
 #define DEFAULT_FRAMESIZE       FRAMESIZE_SMALL
 #define DEFAULT_TIMEBASE        TIME_100us
+#define DEFAULT_SAMPLERATE      SR_KHZ(10)
 #define DEFAULT_TRIGGER_SOURCE  "CH1"
 #define DEFAULT_COUPLING        COUPLING_DC
-#define DEFAULT_HORIZ_TRIGGERPOS 0.5
+#define DEFAULT_CAPTURE_RATIO   100
 #define DEFAULT_VERT_OFFSET     0.5
 #define DEFAULT_VERT_TRIGGERPOS 0.5
 
@@ -51,7 +52,7 @@
 /* All models have this for their "fast" mode. */
 #define FRAMESIZE_SMALL         (10 * 1024)
 
-#define NUM_CHANNELS		2
+#define NUM_CHANNELS            2
 
 enum control_requests {
 	CTRL_READ_EEPROM = 0xa2,
@@ -62,17 +63,27 @@ enum control_requests {
 };
 
 enum dso_commands {
-	CMD_SET_FILTERS = 0,
-	CMD_SET_TRIGGER_SAMPLERATE,
-	CMD_FORCE_TRIGGER,
-	CMD_CAPTURE_START,
-	CMD_ENABLE_TRIGGER,
-	CMD_GET_CHANNELDATA,
-	CMD_GET_CAPTURESTATE,
-	CMD_SET_VOLTAGE,
+	CMD_SET_FILTERS                     = 0x0,
+	CMD_SET_TRIGGER_SAMPLERATE          = 0x1,
+	CMD_FORCE_TRIGGER                   = 0x2,
+	CMD_CAPTURE_START                   = 0x3,
+	CMD_ENABLE_TRIGGER                  = 0x4,
+	CMD_GET_CHANNELDATA                 = 0x5,
+	CMD_GET_CAPTURESTATE                = 0x6,
+	CMD_SET_VOLTAGE                     = 0x7,
 	/* unused */
-	CMD_SET_LOGICALDATA,
-	CMD_GET_LOGICALDATA,
+	CMD_SET_LOGICALDATA                 = 0x8,
+	CMD_GET_LOGICALDATA                 = 0x9,
+	CMD__UNUSED1                        = 0xa,
+	/*
+	 * For the following and other specials please see
+	 * http://openhantek.sourceforge.net/doc/namespaceHantek.html#ac1cd181814cf3da74771c29800b39028
+	 */
+	CMD_2250_SET_CHANNELS               = 0xb,
+	CMD_2250_SET_TRIGGERSOURCE          = 0xc,
+	CMD_2250_SET_RECORD_LENGTH          = 0xd,
+	CMD_2250_SET_SAMPLERATE             = 0xe,
+	CMD_2250_SET_TRIGGERPOS_AND_BUFFER  = 0xf,
 };
 
 /* Must match the coupling table. */
@@ -130,6 +141,7 @@ enum capturestates {
 	CAPTURE_EMPTY = 0,
 	CAPTURE_FILLING = 1,
 	CAPTURE_READY_8BIT = 2,
+	CAPTURE_READY_2250 = 3,
 	CAPTURE_READY_9BIT = 7,
 	CAPTURE_TIMEOUT = 127,
 	CAPTURE_UNKNOWN = 255,
@@ -178,6 +190,7 @@ struct dev_context {
 	int dev_state;
 
 	/* Oscilloscope settings. */
+	uint64_t samplerate;
 	int timebase;
 	gboolean ch_enabled[2];
 	int voltage[2];
@@ -191,7 +204,7 @@ struct dev_context {
 	gboolean filter[2];
 	int triggerslope;
 	char *triggersource;
-	float triggerposition;
+	uint64_t capture_ratio;
 	int triggermode;
 
 	/* Frame transfer */
@@ -211,5 +224,7 @@ SR_PRIV int dso_get_capturestate(const struct sr_dev_inst *sdi,
 SR_PRIV int dso_capture_start(const struct sr_dev_inst *sdi);
 SR_PRIV int dso_get_channeldata(const struct sr_dev_inst *sdi,
 		libusb_transfer_cb_fn cb);
+SR_PRIV int dso_set_trigger_samplerate(const struct sr_dev_inst *sdi);
+SR_PRIV int dso_set_voffsets(const struct sr_dev_inst *sdi);
 
 #endif