X-Git-Url: https://sigrok.org/gitweb/?a=blobdiff_plain;f=src%2Fhardware%2Ffx2lafw%2Fprotocol.h;h=e228c87518371b47def45e60b71129ebb3223dcc;hb=5db45cc55d9155f1def688f27ac7ebfd3d7f0069;hp=48be99309f13ddafa2805ca52a8359e7de0210b6;hpb=7bfcb25cf1aa4fe7ddc177292bcf2ee4d9b1446d;p=libsigrok.git diff --git a/src/hardware/fx2lafw/protocol.h b/src/hardware/fx2lafw/protocol.h index 48be9930..e228c875 100644 --- a/src/hardware/fx2lafw/protocol.h +++ b/src/hardware/fx2lafw/protocol.h @@ -26,7 +26,7 @@ #include #include #include -#include "libsigrok.h" +#include #include "libsigrok-internal.h" #define LOG_PREFIX "fx2lafw" @@ -39,6 +39,8 @@ #define NUM_SIMUL_TRANSFERS 32 #define MAX_EMPTY_TRANSFERS (NUM_SIMUL_TRANSFERS * 2) +#define NUM_CHANNELS 16 + #define FX2LAFW_REQUIRED_VERSION_MAJOR 1 #define MAX_8BIT_SAMPLE_RATE SR_MHZ(24) @@ -48,8 +50,31 @@ #define MAX_SAMPLE_DELAY (6 * 256) #define DEV_CAPS_16BIT_POS 0 +#define DEV_CAPS_AX_ANALOG_POS 1 #define DEV_CAPS_16BIT (1 << DEV_CAPS_16BIT_POS) +#define DEV_CAPS_AX_ANALOG (1 << DEV_CAPS_AX_ANALOG_POS) + +#define DSLOGIC_FPGA_FIRMWARE_5V "dreamsourcelab-dslogic-fpga-5v.fw" +#define DSLOGIC_FPGA_FIRMWARE_3V3 "dreamsourcelab-dslogic-fpga-3v3.fw" +#define DSCOPE_FPGA_FIRMWARE "dreamsourcelab-dscope-fpga.fw" +#define DSLOGIC_PRO_FPGA_FIRMWARE "dreamsourcelab-dslogic-pro-fpga.fw" + +/* Protocol commands */ +#define CMD_GET_FW_VERSION 0xb0 +#define CMD_START 0xb1 +#define CMD_GET_REVID_VERSION 0xb2 + +#define CMD_START_FLAGS_CLK_CTL2_POS 4 +#define CMD_START_FLAGS_WIDE_POS 5 +#define CMD_START_FLAGS_CLK_SRC_POS 6 + +#define CMD_START_FLAGS_CLK_CTL2 (1 << CMD_START_FLAGS_CLK_CTL2_POS) +#define CMD_START_FLAGS_SAMPLE_8BIT (0 << CMD_START_FLAGS_WIDE_POS) +#define CMD_START_FLAGS_SAMPLE_16BIT (1 << CMD_START_FLAGS_WIDE_POS) + +#define CMD_START_FLAGS_CLK_30MHZ (0 << CMD_START_FLAGS_CLK_SRC_POS) +#define CMD_START_FLAGS_CLK_48MHZ (1 << CMD_START_FLAGS_CLK_SRC_POS) struct fx2lafw_profile { uint16_t vid; @@ -69,6 +94,7 @@ struct fx2lafw_profile { struct dev_context { const struct fx2lafw_profile *profile; + GSList *enabled_analog_channels; /* * Since we can't keep track of an fx2lafw device after upgrading * the firmware (it renumerates into a different device address @@ -77,6 +103,10 @@ struct dev_context { */ int64_t fw_updated; + /* Supported samplerates */ + const uint64_t *samplerates; + int num_samplerates; + /* Device/capture settings */ uint64_t cur_samplerate; uint64_t limit_samples; @@ -92,20 +122,37 @@ struct dev_context { int submitted_transfers; int empty_transfer_count; - void *cb_data; unsigned int num_transfers; struct libusb_transfer **transfers; struct sr_context *ctx; + void (*send_data_proc)(struct sr_dev_inst *sdi, + uint8_t *data, size_t length, size_t sample_width); + uint8_t *logic_buffer; + float *analog_buffer; + + /* Is this a DSLogic? */ + gboolean dslogic; + uint16_t dslogic_mode; + uint32_t trigger_pos; + gboolean dslogic_external_clock; + gboolean dslogic_continuous_mode; + int dslogic_clock_edge; + int dslogic_voltage_threshold; }; SR_PRIV int fx2lafw_command_start_acquisition(const struct sr_dev_inst *sdi); -SR_PRIV gboolean fx2lafw_check_conf_profile(libusb_device *dev); +SR_PRIV gboolean match_manuf_prod(libusb_device *dev, const char *manufacturer, + const char *product); SR_PRIV int fx2lafw_dev_open(struct sr_dev_inst *sdi, struct sr_dev_driver *di); SR_PRIV struct dev_context *fx2lafw_dev_new(void); SR_PRIV void fx2lafw_abort_acquisition(struct dev_context *devc); -SR_PRIV void fx2lafw_receive_transfer(struct libusb_transfer *transfer); +SR_PRIV void LIBUSB_CALL fx2lafw_receive_transfer(struct libusb_transfer *transfer); SR_PRIV size_t fx2lafw_get_buffer_size(struct dev_context *devc); SR_PRIV unsigned int fx2lafw_get_number_of_transfers(struct dev_context *devc); SR_PRIV unsigned int fx2lafw_get_timeout(struct dev_context *devc); +SR_PRIV void la_send_data_proc(struct sr_dev_inst *sdi, uint8_t *data, + size_t length, size_t sample_width); +SR_PRIV void mso_send_data_proc(struct sr_dev_inst *sdi, uint8_t *data, + size_t length, size_t sample_width); #endif