X-Git-Url: https://sigrok.org/gitweb/?a=blobdiff_plain;f=src%2Fhardware%2Ffx2lafw%2Fdslogic.c;h=0e4c5599bceb3590e1859d733a603b121419989f;hb=4237fbcaac84160a04333244ba0a309b952d3a8f;hp=489671f5a6621b53d44d48b02c7a7aef8bd46a58;hpb=b9d530920fa97ab92d5f78f6f00a1ffc73259f2f;p=libsigrok.git
diff --git a/src/hardware/fx2lafw/dslogic.c b/src/hardware/fx2lafw/dslogic.c
index 489671f5..0e4c5599 100644
--- a/src/hardware/fx2lafw/dslogic.c
+++ b/src/hardware/fx2lafw/dslogic.c
@@ -18,67 +18,81 @@
* along with this program. If not, see .
*/
-#include
-#include
-#include
-#include
+#include
#include
#include
#include
#include "protocol.h"
#include "dslogic.h"
-#define FW_BUFSIZE 4096
-int dslogic_fpga_firmware_upload(const struct sr_dev_inst *sdi,
- const char *filename)
+/*
+ * This should be larger than the FPGA bitstream image so that it'll get
+ * uploaded in one big operation. There seem to be issues when uploading
+ * it in chunks.
+ */
+#define FW_BUFSIZE (1024 * 1024)
+
+#define FPGA_UPLOAD_DELAY (10 * 1000)
+
+#define USB_TIMEOUT (3 * 1000)
+
+SR_PRIV int dslogic_fpga_firmware_upload(const struct sr_dev_inst *sdi,
+ const char *name)
{
- FILE *fw;
- struct stat st;
+ uint64_t sum;
+ struct sr_resource bitstream;
+ struct drv_context *drvc;
struct sr_usb_dev_inst *usb;
- int chunksize, result, ret;
unsigned char *buf;
- int sum, transferred;
-
- sr_dbg("Uploading FPGA firmware at %s.", filename);
+ ssize_t chunksize;
+ int transferred;
+ int result, ret;
+ uint8_t cmd[3];
+ drvc = sdi->driver->context;
usb = sdi->conn;
- if (stat(filename, &st) < 0) {
- sr_err("Unable to upload FPGA firmware: %s", strerror(errno));
- return SR_ERR;
- }
+
+ sr_dbg("Uploading FPGA firmware '%s'.", name);
+
+ result = sr_resource_open(drvc->sr_ctx, &bitstream,
+ SR_RESOURCE_FIRMWARE, name);
+ if (result != SR_OK)
+ return result;
/* Tell the device firmware is coming. */
+ memset(cmd, 0, sizeof(cmd));
if ((ret = libusb_control_transfer(usb->devhdl, LIBUSB_REQUEST_TYPE_VENDOR |
LIBUSB_ENDPOINT_OUT, DS_CMD_FPGA_FW, 0x0000, 0x0000,
- NULL, 0, 3000)) < 0) {
+ (unsigned char *)&cmd, sizeof(cmd), USB_TIMEOUT)) < 0) {
sr_err("Failed to upload FPGA firmware: %s.", libusb_error_name(ret));
- return SR_ERR;
- }
- buf = g_malloc(FW_BUFSIZE);
-
- if ((fw = g_fopen(filename, "rb")) == NULL) {
- sr_err("Unable to open %s for reading: %s.", filename, strerror(errno));
+ sr_resource_close(drvc->sr_ctx, &bitstream);
return SR_ERR;
}
/* Give the FX2 time to get ready for FPGA firmware upload. */
- g_usleep(10 * 1000);
+ g_usleep(FPGA_UPLOAD_DELAY);
+ buf = g_malloc(FW_BUFSIZE);
sum = 0;
result = SR_OK;
while (1) {
- if ((chunksize = fread(buf, 1, FW_BUFSIZE, fw)) == 0)
+ chunksize = sr_resource_read(drvc->sr_ctx, &bitstream,
+ buf, FW_BUFSIZE);
+ if (chunksize < 0)
+ result = SR_ERR;
+ if (chunksize <= 0)
break;
if ((ret = libusb_bulk_transfer(usb->devhdl, 2 | LIBUSB_ENDPOINT_OUT,
- buf, chunksize, &transferred, 1000)) < 0) {
+ buf, chunksize, &transferred, USB_TIMEOUT)) < 0) {
sr_err("Unable to configure FPGA firmware: %s.",
libusb_error_name(ret));
result = SR_ERR;
break;
}
sum += transferred;
- sr_spew("Uploaded %d/%d bytes.", sum, st.st_size);
+ sr_spew("Uploaded %" PRIu64 "/%" PRIu64 " bytes.",
+ sum, bitstream.size);
if (transferred != chunksize) {
sr_err("Short transfer while uploading FPGA firmware.");
@@ -86,15 +100,16 @@ int dslogic_fpga_firmware_upload(const struct sr_dev_inst *sdi,
break;
}
}
- fclose(fw);
g_free(buf);
+ sr_resource_close(drvc->sr_ctx, &bitstream);
+
if (result == SR_OK)
sr_dbg("FPGA firmware upload done.");
return result;
}
-int dslogic_start_acquisition(const struct sr_dev_inst *sdi)
+SR_PRIV int dslogic_start_acquisition(const struct sr_dev_inst *sdi)
{
struct dev_context *devc;
struct sr_usb_dev_inst *usb;
@@ -102,7 +117,7 @@ int dslogic_start_acquisition(const struct sr_dev_inst *sdi)
int ret;
devc = sdi->priv;
- mode.flags = 0;
+ mode.flags = DS_START_FLAGS_MODE_LA;
mode.sample_delay_h = mode.sample_delay_l = 0;
if (devc->sample_wide)
mode.flags |= DS_START_FLAGS_SAMPLE_WIDE;
@@ -110,7 +125,7 @@ int dslogic_start_acquisition(const struct sr_dev_inst *sdi)
usb = sdi->conn;
ret = libusb_control_transfer(usb->devhdl, LIBUSB_REQUEST_TYPE_VENDOR |
LIBUSB_ENDPOINT_OUT, DS_CMD_START, 0x0000, 0x0000,
- (unsigned char *)&mode, sizeof(mode), 3000);
+ (unsigned char *)&mode, sizeof(mode), USB_TIMEOUT);
if (ret < 0) {
sr_err("Failed to send start command: %s.", libusb_error_name(ret));
return SR_ERR;
@@ -119,7 +134,7 @@ int dslogic_start_acquisition(const struct sr_dev_inst *sdi)
return SR_OK;
}
-int dslogic_stop_acquisition(const struct sr_dev_inst *sdi)
+SR_PRIV int dslogic_stop_acquisition(const struct sr_dev_inst *sdi)
{
struct sr_usb_dev_inst *usb;
struct dslogic_mode mode;
@@ -131,7 +146,7 @@ int dslogic_stop_acquisition(const struct sr_dev_inst *sdi)
usb = sdi->conn;
ret = libusb_control_transfer(usb->devhdl, LIBUSB_REQUEST_TYPE_VENDOR |
LIBUSB_ENDPOINT_OUT, DS_CMD_START, 0x0000, 0x0000,
- (unsigned char *)&mode, sizeof(struct dslogic_mode), 3000);
+ (unsigned char *)&mode, sizeof(struct dslogic_mode), USB_TIMEOUT);
if (ret < 0) {
sr_err("Failed to send stop command: %s.", libusb_error_name(ret));
return SR_ERR;
@@ -140,7 +155,109 @@ int dslogic_stop_acquisition(const struct sr_dev_inst *sdi)
return SR_OK;
}
-int dslogic_fpga_configure(const struct sr_dev_inst *sdi)
+/*
+ * Get the session trigger and configure the FPGA structure
+ * accordingly.
+ */
+static int dslogic_set_trigger(const struct sr_dev_inst *sdi,
+ struct dslogic_fpga_config *cfg)
+{
+ struct sr_trigger *trigger;
+ struct sr_trigger_stage *stage;
+ struct sr_trigger_match *match;
+
+ struct dev_context *devc;
+ devc = sdi->priv;
+ const GSList *l, *m;
+ int channelbit, i = 0;
+ uint16_t v16;
+
+ cfg->trig_mask0[0] = 0xffff;
+ cfg->trig_mask1[0] = 0xffff;
+
+ cfg->trig_value0[0] = 0;
+ cfg->trig_value1[0] = 0;
+
+ cfg->trig_edge0[0] = 0;
+ cfg->trig_edge1[0] = 0;
+
+ cfg->trig_logic0[0] = 0;
+ cfg->trig_logic1[0] = 0;
+
+ cfg->trig_count0[0] = 0;
+ cfg->trig_count1[0] = 0;
+
+ cfg->trig_pos = 0;
+ cfg->trig_sda = 0;
+ cfg->trig_glb = 0;
+ cfg->trig_adp = cfg->count - cfg->trig_pos - 1;
+
+ for (i = 1; i < 16; i++) {
+ cfg->trig_mask0[i] = 0xff;
+ cfg->trig_mask1[i] = 0xff;
+ cfg->trig_value0[i] = 0;
+ cfg->trig_value1[i] = 0;
+ cfg->trig_edge0[i] = 0;
+ cfg->trig_edge1[i] = 0;
+ cfg->trig_count0[i] = 0;
+ cfg->trig_count1[i] = 0;
+ cfg->trig_logic0[i] = 2;
+ cfg->trig_logic1[i] = 2;
+ }
+
+ cfg->trig_pos = (uint32_t)(devc->capture_ratio / 100.0 * devc->limit_samples);
+ sr_dbg("pos: %d", cfg->trig_pos);
+
+ sr_dbg("configuring trigger");
+
+ if (!(trigger = sr_session_trigger_get(sdi->session))){
+ sr_dbg("No session trigger found");
+ return SR_OK;
+ }
+
+ for (l = trigger->stages; l; l = l->next) {
+ stage = l->data;
+ for (m = stage->matches; m; m = m->next) {
+ match = m->data;
+ if (!match->channel->enabled)
+ /* Ignore disabled channels with a trigger. */
+ continue;
+ channelbit = 1 << (match->channel->index);
+ /* Simple trigger support (event). */
+ if (match->match == SR_TRIGGER_ONE) {
+ cfg->trig_mask0[0] &= ~channelbit;
+ cfg->trig_mask1[0] &= ~channelbit;
+ cfg->trig_value0[0] |= channelbit;
+ cfg->trig_value1[0] |= channelbit;
+ } else if (match->match == SR_TRIGGER_ZERO) {
+ cfg->trig_mask0[0] &= ~channelbit;
+ cfg->trig_mask1[0] &= ~channelbit;
+ } else if (match->match == SR_TRIGGER_FALLING) {
+ cfg->trig_mask0[0] &= ~channelbit;
+ cfg->trig_mask1[0] &= ~channelbit;
+ cfg->trig_edge0[0] |= channelbit;
+ cfg->trig_edge1[0] |= channelbit;
+ } else if (match->match == SR_TRIGGER_RISING) {
+ cfg->trig_mask0[0] &= ~channelbit;
+ cfg->trig_mask1[0] &= ~channelbit;
+ cfg->trig_value0[0] |= channelbit;
+ cfg->trig_value1[0] |= channelbit;
+ cfg->trig_edge0[0] |= channelbit;
+ cfg->trig_edge1[0] |= channelbit;
+ } else if(match->match == SR_TRIGGER_EDGE){
+ cfg->trig_edge0[0] |= channelbit;
+ cfg->trig_edge1[0] |= channelbit;
+ }
+ }
+ }
+ v16 = RL16(&cfg->mode);
+ v16 |= 1 << 0;
+ WL16(&cfg->mode, v16);
+ return SR_OK;
+}
+
+
+SR_PRIV int dslogic_fpga_configure(const struct sr_dev_inst *sdi)
{
struct dev_context *devc;
struct sr_usb_dev_inst *usb;
@@ -182,7 +299,7 @@ int dslogic_fpga_configure(const struct sr_dev_inst *sdi)
ret = libusb_control_transfer(usb->devhdl, LIBUSB_REQUEST_TYPE_VENDOR |
LIBUSB_ENDPOINT_OUT, DS_CMD_CONFIG, 0x0000, 0x0000,
- c, 3, 100);
+ c, 3, USB_TIMEOUT);
if (ret < 0) {
sr_err("Failed to send FPGA configure command: %s.", libusb_error_name(ret));
return SR_ERR;
@@ -192,6 +309,8 @@ int dslogic_fpga_configure(const struct sr_dev_inst *sdi)
* 15 1 = internal test mode
* 14 1 = external test mode
* 13 1 = loopback test mode
+ * 12 1 = stream mode
+ * 11 1 = serial trigger
* 8-12 unused
* 7 1 = analog mode
* 6 1 = samplerate 400MHz
@@ -209,17 +328,17 @@ int dslogic_fpga_configure(const struct sr_dev_inst *sdi)
else if (devc->dslogic_mode == DS_OP_LOOPBACK_TEST)
v16 = 1 << 13;
if (devc->dslogic_external_clock)
- v16 |= 1 << 2;
+ v16 |= 1 << 1;
WL16(&cfg.mode, v16);
-
v32 = ceil(SR_MHZ(100) * 1.0 / devc->cur_samplerate);
WL32(&cfg.divider, v32);
WL32(&cfg.count, devc->limit_samples);
+ dslogic_set_trigger(sdi, &cfg);
+
len = sizeof(struct dslogic_fpga_config);
ret = libusb_bulk_transfer(usb->devhdl, 2 | LIBUSB_ENDPOINT_OUT,
- (unsigned char *)&cfg, len,
- &transferred, 100);
+ (unsigned char *)&cfg, len, &transferred, USB_TIMEOUT);
if (ret < 0 || transferred != len) {
sr_err("Failed to send FPGA configuration: %s.", libusb_error_name(ret));
return SR_ERR;