X-Git-Url: https://sigrok.org/gitweb/?a=blobdiff_plain;f=src%2Fhardware%2Fconrad-digi-35-cpu%2Fapi.c;h=1f3abe8156c9363145091df19f4c3b03f64c5da5;hb=6e8d31d4680a35a35c2605c90d3abcc559d70a56;hp=a9ea575e5d9f5f82bdcc41471328e53a8d2898ba;hpb=4f840ce965b1c30c5ab75afecc56193cbaf5c1b3;p=libsigrok.git

diff --git a/src/hardware/conrad-digi-35-cpu/api.c b/src/hardware/conrad-digi-35-cpu/api.c
index a9ea575e..1f3abe81 100644
--- a/src/hardware/conrad-digi-35-cpu/api.c
+++ b/src/hardware/conrad-digi-35-cpu/api.c
@@ -22,6 +22,7 @@
  *  @internal
  */
 
+#include <config.h>
 #include "protocol.h"
 
 #define SERIALCOMM "9600/8n1"
@@ -33,8 +34,8 @@ static const uint32_t scanopts[] = {
 
 static const uint32_t devopts[] = {
 	SR_CONF_POWER_SUPPLY,
-	SR_CONF_OUTPUT_VOLTAGE | SR_CONF_SET,
-	SR_CONF_OUTPUT_CURRENT | SR_CONF_SET,
+	SR_CONF_VOLTAGE | SR_CONF_SET,
+	SR_CONF_CURRENT | SR_CONF_SET,
 	SR_CONF_OVER_CURRENT_PROTECTION_ENABLED | SR_CONF_SET,
 };
 
@@ -55,7 +56,7 @@ static GSList *scan(struct sr_dev_driver *di, GSList *options)
 	const char *conn, *serialcomm;
 
 	devices = NULL;
-	drvc = di->priv;
+	drvc = di->context;
 	drvc->instances = NULL;
 	conn = serialcomm = NULL;
 
@@ -107,7 +108,7 @@ static GSList *scan(struct sr_dev_driver *di, GSList *options)
 
 static GSList *dev_list(const struct sr_dev_driver *di)
 {
-	return ((struct drv_context *)(di->priv))->instances;
+	return ((struct drv_context *)(di->context))->instances;
 }
 
 static int cleanup(const struct sr_dev_driver *di)
@@ -126,9 +127,8 @@ static int config_set(uint32_t key, GVariant *data, const struct sr_dev_inst *sd
 	if (sdi->status != SR_ST_ACTIVE)
 		return SR_ERR_DEV_CLOSED;
 
-	ret = SR_OK;
 	switch (key) {
-	case SR_CONF_OUTPUT_VOLTAGE:
+	case SR_CONF_VOLTAGE:
 		dblval = g_variant_get_double(data);
 		if ((dblval < 0.0) || (dblval > 35.0)) {
 			sr_err("Voltage out of range (0 - 35.0)!");
@@ -136,7 +136,7 @@ static int config_set(uint32_t key, GVariant *data, const struct sr_dev_inst *sd
 		}
 		ret = send_msg1(sdi, 'V', (int) (dblval * 10 + 0.5));
 		break;
-	case SR_CONF_OUTPUT_CURRENT:
+	case SR_CONF_CURRENT:
 		dblval = g_variant_get_double(data);
 		if ((dblval < 0.01) || (dblval > 2.55)) {
 			sr_err("Current out of range (0 - 2.55)!");
@@ -218,5 +218,5 @@ SR_PRIV struct sr_dev_driver conrad_digi_35_cpu_driver_info = {
 	.dev_close = std_serial_dev_close,
 	.dev_acquisition_start = dev_acquisition_start,
 	.dev_acquisition_stop = dev_acquisition_stop,
-	.priv = NULL,
+	.context = NULL,
 };