X-Git-Url: https://sigrok.org/gitweb/?a=blobdiff_plain;f=src%2Fhardware%2Fasix-sigma%2Fprotocol.c;h=3c29aad9f3a33dfc75615a5e2535f4018fb5d06e;hb=bfa79fbdb65e56f56b062b56ca92271d5473ef5b;hp=82a0f9c20405f5946f71c08ea45aac723d256662;hpb=f06fb3e9f1fdfc3780bfa8cb06f76a2d630d6f1c;p=libsigrok.git diff --git a/src/hardware/asix-sigma/protocol.c b/src/hardware/asix-sigma/protocol.c index 82a0f9c2..3c29aad9 100644 --- a/src/hardware/asix-sigma/protocol.c +++ b/src/hardware/asix-sigma/protocol.c @@ -47,7 +47,7 @@ SR_PRIV const uint64_t samplerates[] = { SR_PRIV const size_t samplerates_count = ARRAY_SIZE(samplerates); -static const char sigma_firmware_files[][24] = { +static const char firmware_files[][24] = { /* 50 MHz, supports 8 bit fractions */ "asix-sigma-50.fw", /* 100 MHz */ @@ -78,12 +78,11 @@ static int sigma_write(void *buf, size_t size, struct dev_context *devc) int ret; ret = ftdi_write_data(&devc->ftdic, (unsigned char *)buf, size); - if (ret < 0) { + if (ret < 0) sr_err("ftdi_write_data failed: %s", ftdi_get_error_string(&devc->ftdic)); - } else if ((size_t) ret != size) { + else if ((size_t) ret != size) sr_err("ftdi_write_data did not complete write."); - } return ret; } @@ -135,18 +134,6 @@ static int sigma_read_register(uint8_t reg, uint8_t *data, size_t len, return sigma_read(data, len, devc); } -static uint8_t sigma_get_register(uint8_t reg, struct dev_context *devc) -{ - uint8_t value; - - if (1 != sigma_read_register(reg, &value, 1, devc)) { - sr_err("sigma_get_register: 1 byte expected"); - return 0; - } - - return value; -} - static int sigma_read_pos(uint32_t *stoppos, uint32_t *triggerpos, struct dev_context *devc) { @@ -169,11 +156,17 @@ static int sigma_read_pos(uint32_t *stoppos, uint32_t *triggerpos, *triggerpos = result[0] | (result[1] << 8) | (result[2] << 16); *stoppos = result[3] | (result[4] << 8) | (result[5] << 16); - /* Not really sure why this must be done, but according to spec. */ + /* + * These "position" values point to after the event (end of + * capture data, trigger condition matched). This is why they + * get decremented here. Sample memory consists of 512-byte + * chunks with meta data in the upper 64 bytes. Thus when the + * decrements takes us into this upper part of the chunk, then + * further move backwards to the end of the chunk's data part. + */ if ((--*stoppos & 0x1ff) == 0x1ff) *stoppos -= 64; - - if ((*--triggerpos & 0x1ff) == 0x1ff) + if ((--*triggerpos & 0x1ff) == 0x1ff) *triggerpos -= 64; return 1; @@ -272,15 +265,6 @@ SR_PRIV int sigma_write_trigger_lut(struct triggerlut *lut, struct dev_context * return SR_OK; } -SR_PRIV void sigma_clear_helper(void *priv) -{ - struct dev_context *devc; - - devc = priv; - - ftdi_deinit(&devc->ftdic); -} - /* * Configure the FPGA for bitbang mode. * This sequence is documented in section 2. of the ASIX Sigma programming @@ -330,6 +314,7 @@ static int sigma_fpga_init_bitbang(struct dev_context *devc) static int sigma_fpga_init_la(struct dev_context *devc) { /* Initialize the logic analyzer mode. */ + uint8_t mode_regval = WMR_SDRAMINIT; uint8_t logic_mode_start[] = { REG_ADDR_LOW | (READ_ID & 0xf), REG_ADDR_HIGH | (READ_ID >> 4), @@ -345,8 +330,8 @@ static int sigma_fpga_init_la(struct dev_context *devc) REG_READ_ADDR, /* Read scratch register. */ REG_ADDR_LOW | (WRITE_MODE & 0xf), - REG_DATA_LOW | 0x0, - REG_DATA_HIGH_WRITE | 0x8, + REG_DATA_LOW | (mode_regval & 0xf), + REG_DATA_HIGH_WRITE | (mode_regval >> 4), }; uint8_t result[3]; @@ -445,38 +430,27 @@ static int upload_firmware(struct sr_context *ctx, unsigned char pins; size_t buf_size; const char *firmware; - struct ftdi_context *ftdic; /* Avoid downloading the same firmware multiple times. */ - firmware = sigma_firmware_files[firmware_idx]; + firmware = firmware_files[firmware_idx]; if (devc->cur_firmware == firmware_idx) { sr_info("Not uploading firmware file '%s' again.", firmware); return SR_OK; } - /* Make sure it's an ASIX SIGMA. */ - ftdic = &devc->ftdic; - ret = ftdi_usb_open_desc(ftdic, USB_VENDOR, USB_PRODUCT, - USB_DESCRIPTION, NULL); - if (ret < 0) { - sr_err("ftdi_usb_open failed: %s", - ftdi_get_error_string(ftdic)); - return 0; - } - - ret = ftdi_set_bitmode(ftdic, 0xdf, BITMODE_BITBANG); + ret = ftdi_set_bitmode(&devc->ftdic, 0xdf, BITMODE_BITBANG); if (ret < 0) { sr_err("ftdi_set_bitmode failed: %s", - ftdi_get_error_string(ftdic)); - return 0; + ftdi_get_error_string(&devc->ftdic)); + return SR_ERR; } /* Four times the speed of sigmalogan - Works well. */ - ret = ftdi_set_baudrate(ftdic, 750 * 1000); + ret = ftdi_set_baudrate(&devc->ftdic, 750 * 1000); if (ret < 0) { sr_err("ftdi_set_baudrate failed: %s", - ftdi_get_error_string(ftdic)); - return 0; + ftdi_get_error_string(&devc->ftdic)); + return SR_ERR; } /* Initialize the FPGA for firmware upload. */ @@ -498,14 +472,14 @@ static int upload_firmware(struct sr_context *ctx, g_free(buf); - ret = ftdi_set_bitmode(ftdic, 0x00, BITMODE_RESET); + ret = ftdi_set_bitmode(&devc->ftdic, 0x00, BITMODE_RESET); if (ret < 0) { sr_err("ftdi_set_bitmode failed: %s", - ftdi_get_error_string(ftdic)); + ftdi_get_error_string(&devc->ftdic)); return SR_ERR; } - ftdi_usb_purge_buffers(ftdic); + ftdi_usb_purge_buffers(&devc->ftdic); /* Discard garbage. */ while (sigma_read(&pins, 1, devc) == 1) @@ -553,6 +527,7 @@ SR_PRIV int sigma_set_samplerate(const struct sr_dev_inst *sdi, uint64_t sampler struct drv_context *drvc; size_t i; int ret; + int num_channels; devc = sdi->priv; drvc = sdi->driver->context; @@ -571,15 +546,16 @@ SR_PRIV int sigma_set_samplerate(const struct sr_dev_inst *sdi, uint64_t sampler * firmware is required and higher rates might limit the set * of available channels. */ + num_channels = devc->num_channels; if (samplerate <= SR_MHZ(50)) { ret = upload_firmware(drvc->sr_ctx, 0, devc); - devc->num_channels = 16; + num_channels = 16; } else if (samplerate == SR_MHZ(100)) { ret = upload_firmware(drvc->sr_ctx, 1, devc); - devc->num_channels = 8; + num_channels = 8; } else if (samplerate == SR_MHZ(200)) { ret = upload_firmware(drvc->sr_ctx, 2, devc); - devc->num_channels = 4; + num_channels = 4; } /* @@ -588,8 +564,8 @@ SR_PRIV int sigma_set_samplerate(const struct sr_dev_inst *sdi, uint64_t sampler * an "event" (memory organization internal to the device). */ if (ret == SR_OK) { + devc->num_channels = num_channels; devc->cur_samplerate = samplerate; - devc->period_ps = 1000000000000ULL / samplerate; devc->samples_per_event = 16 / devc->num_channels; devc->state.state = SIGMA_IDLE; } @@ -663,16 +639,13 @@ SR_PRIV int sigma_convert_trigger(const struct sr_dev_inst *sdi) if (match->match == SR_TRIGGER_ONE) { devc->trigger.simplevalue |= channelbit; devc->trigger.simplemask |= channelbit; - } - else if (match->match == SR_TRIGGER_ZERO) { + } else if (match->match == SR_TRIGGER_ZERO) { devc->trigger.simplevalue &= ~channelbit; devc->trigger.simplemask |= channelbit; - } - else if (match->match == SR_TRIGGER_FALLING) { + } else if (match->match == SR_TRIGGER_FALLING) { devc->trigger.fallingmask |= channelbit; trigger_set++; - } - else if (match->match == SR_TRIGGER_RISING) { + } else if (match->match == SR_TRIGGER_RISING) { devc->trigger.risingmask |= channelbit; trigger_set++; } @@ -694,7 +667,6 @@ SR_PRIV int sigma_convert_trigger(const struct sr_dev_inst *sdi) return SR_OK; } - /* Software trigger to determine exact trigger position. */ static int get_trigger_offset(uint8_t *samples, uint16_t last_sample, struct sigma_trigger *t) @@ -796,6 +768,34 @@ static void store_sr_sample(uint8_t *samples, int idx, uint16_t data) samples[2 * idx + 1] = (data >> 8) & 0xff; } +/* + * Local wrapper around sr_session_send() calls. Make sure to not send + * more samples to the session's datafeed than what was requested by a + * previously configured (optional) sample count. + */ +static void sigma_session_send(struct sr_dev_inst *sdi, + struct sr_datafeed_packet *packet) +{ + struct dev_context *devc; + struct sr_datafeed_logic *logic; + uint64_t send_now; + + devc = sdi->priv; + if (devc->limit_samples) { + logic = (void *)packet->payload; + send_now = logic->length / logic->unitsize; + if (devc->sent_samples + send_now > devc->limit_samples) { + send_now = devc->limit_samples - devc->sent_samples; + logic->length = send_now * logic->unitsize; + } + if (!send_now) + return; + devc->sent_samples += send_now; + } + + sr_session_send(sdi, packet); +} + /* * This size translates to: event count (1K events per cluster), times * the sample width (unitsize, 16bits per event), times the maximum @@ -829,15 +829,9 @@ static void sigma_decode_dram_cluster(struct sigma_dram_cluster *dram_cluster, logic.data = samples; /* - * First of all, send Sigrok a copy of the last sample from - * previous cluster as many times as needed to make up for - * the differential characteristics of data we get from the - * Sigma. Sigrok needs one sample of data per period. - * - * One DRAM cluster contains a timestamp and seven samples, - * the units of timestamp are "devc->period_ps" , the first - * sample in the cluster happens at the time of the timestamp - * and the remaining samples happen at timestamp +1...+6 . + * If this cluster is not adjacent to the previously received + * cluster, then send the appropriate number of samples with the + * previous values to the sigrok session. This "decodes RLE". */ for (ts = 0; ts < tsdiff; ts++) { i = ts % 1024; @@ -853,7 +847,7 @@ static void sigma_decode_dram_cluster(struct sigma_dram_cluster *dram_cluster, if ((i == 1023) || (ts == tsdiff - 1)) { logic.length = (i + 1) * logic.unitsize; for (j = 0; j < devc->samples_per_event; j++) - sr_session_send(sdi, &packet); + sigma_session_send(sdi, &packet); } } @@ -907,7 +901,7 @@ static void sigma_decode_dram_cluster(struct sigma_dram_cluster *dram_cluster, trig_count = trigger_offset * devc->samples_per_event; packet.type = SR_DF_LOGIC; logic.length = trig_count * logic.unitsize; - sr_session_send(sdi, &packet); + sigma_session_send(sdi, &packet); send_ptr += trig_count * logic.unitsize; send_count -= trig_count; } @@ -927,7 +921,7 @@ static void sigma_decode_dram_cluster(struct sigma_dram_cluster *dram_cluster, packet.type = SR_DF_LOGIC; logic.length = send_count * logic.unitsize; logic.data = send_ptr; - sr_session_send(sdi, &packet); + sigma_session_send(sdi, &packet); } ss->lastsample = sample; @@ -1003,50 +997,79 @@ static int download_capture(struct sr_dev_inst *sdi) uint8_t modestatus; uint32_t i; uint32_t dl_lines_total, dl_lines_curr, dl_lines_done; + uint32_t dl_first_line, dl_line; uint32_t dl_events_in_line; uint32_t trg_line, trg_event; devc = sdi->priv; dl_events_in_line = 64 * 7; - trg_line = ~0; - trg_event = ~0; - - dram_line = g_try_malloc0(chunks_per_read * sizeof(*dram_line)); - if (!dram_line) - return FALSE; sr_info("Downloading sample data."); + devc->state.state = SIGMA_DOWNLOAD; - /* Stop acquisition. */ - sigma_set_register(WRITE_MODE, 0x11, devc); + /* + * Ask the hardware to stop data acquisition. Reception of the + * FORCESTOP request makes the hardware "disable RLE" (store + * clusters to DRAM regardless of whether pin state changes) and + * raise the POSTTRIGGERED flag. + */ + sigma_set_register(WRITE_MODE, WMR_FORCESTOP | WMR_SDRAMWRITEEN, devc); + do { + if (sigma_read_register(READ_MODE, &modestatus, 1, devc) != 1) { + sr_err("failed while waiting for RMR_POSTTRIGGERED bit"); + return FALSE; + } + } while (!(modestatus & RMR_POSTTRIGGERED)); /* Set SDRAM Read Enable. */ - sigma_set_register(WRITE_MODE, 0x02, devc); + sigma_set_register(WRITE_MODE, WMR_SDRAMREADEN, devc); /* Get the current position. */ sigma_read_pos(&stoppos, &triggerpos, devc); /* Check if trigger has fired. */ - modestatus = sigma_get_register(READ_MODE, devc); - if (modestatus & 0x20) { + if (sigma_read_register(READ_MODE, &modestatus, 1, devc) != 1) { + sr_err("failed to read READ_MODE register"); + return FALSE; + } + trg_line = ~0; + trg_event = ~0; + if (modestatus & RMR_TRIGGERED) { trg_line = triggerpos >> 9; trg_event = triggerpos & 0x1ff; } + devc->sent_samples = 0; + /* - * Determine how many 1024b "DRAM lines" do we need to read from the - * Sigma so we have a complete set of samples. Note that the last - * line can be only partial, containing less than 64 clusters. + * Determine how many "DRAM lines" of 1024 bytes each we need to + * retrieve from the Sigma hardware, so that we have a complete + * set of samples. Note that the last line need not contain 64 + * clusters, it might be partially filled only. + * + * When RMR_ROUND is set, the circular buffer in DRAM has wrapped + * around. Since the status of the very next line is uncertain in + * that case, we skip it and start reading from the next line. The + * circular buffer has 32K lines (0x8000). */ dl_lines_total = (stoppos >> 9) + 1; - + if (modestatus & RMR_ROUND) { + dl_first_line = dl_lines_total + 1; + dl_lines_total = 0x8000 - 2; + } else { + dl_first_line = 0; + } + dram_line = g_try_malloc0(chunks_per_read * sizeof(*dram_line)); + if (!dram_line) + return FALSE; dl_lines_done = 0; - while (dl_lines_total > dl_lines_done) { /* We can download only up-to 32 DRAM lines in one go! */ - dl_lines_curr = MIN(chunks_per_read, dl_lines_total); + dl_lines_curr = MIN(chunks_per_read, dl_lines_total - dl_lines_done); - bufsz = sigma_read_dram(dl_lines_done, dl_lines_curr, + dl_line = dl_first_line + dl_lines_done; + dl_line %= 0x8000; + bufsz = sigma_read_dram(dl_line, dl_lines_curr, (uint8_t *)dram_line, devc); /* TODO: Check bufsz. For now, just avoid compiler warnings. */ (void)bufsz; @@ -1074,45 +1097,38 @@ static int download_capture(struct sr_dev_inst *sdi) dl_lines_done += dl_lines_curr; } + g_free(dram_line); std_session_send_df_end(sdi); - sdi->driver->dev_acquisition_stop(sdi); - - g_free(dram_line); + devc->state.state = SIGMA_IDLE; + sr_dev_acquisition_stop(sdi); return TRUE; } /* - * Handle the Sigma when in CAPTURE mode. This function checks: - * - Sampling time ended - * - DRAM capacity overflow - * This function triggers download of the samples from Sigma - * in case either of the above conditions is true. + * Periodically check the Sigma status when in CAPTURE mode. This routine + * checks whether the configured sample count or sample time have passed, + * and will stop acquisition and download the acquired samples. */ static int sigma_capture_mode(struct sr_dev_inst *sdi) { struct dev_context *devc; uint64_t running_msec; - struct timeval tv; - uint32_t stoppos, triggerpos; + uint64_t current_time; devc = sdi->priv; - /* Check if the selected sampling duration passed. */ - gettimeofday(&tv, 0); - running_msec = (tv.tv_sec - devc->start_tv.tv_sec) * 1000 + - (tv.tv_usec - devc->start_tv.tv_usec) / 1000; + /* + * Check if the selected sampling duration passed. Sample count + * limits are covered by this enforced timeout as well. + */ + current_time = g_get_monotonic_time(); + running_msec = (current_time - devc->start_time) / 1000; if (running_msec >= devc->limit_msec) return download_capture(sdi); - /* Get the position in DRAM to which the FPGA is writing now. */ - sigma_read_pos(&stoppos, &triggerpos, devc); - /* Test if DRAM is full and if so, download the data. */ - if ((stoppos >> 9) == 32767) - return download_capture(sdi); - return TRUE; } @@ -1130,6 +1146,14 @@ SR_PRIV int sigma_receive_data(int fd, int revents, void *cb_data) if (devc->state.state == SIGMA_IDLE) return TRUE; + /* + * When the application has requested to stop the acquisition, + * then immediately start downloading sample data. Otherwise + * keep checking configured limits which will terminate the + * acquisition and initiate download. + */ + if (devc->state.state == SIGMA_STOPPING) + return download_capture(sdi); if (devc->state.state == SIGMA_CAPTURE) return sigma_capture_mode(sdi);