X-Git-Url: https://sigrok.org/gitweb/?a=blobdiff_plain;f=serialport.c;h=83cb52913687e94c3bd50b0a0cdc798cb7bb4038;hb=9f90173cbd7b3c79f51b4e9729bcbd91a5c30a71;hp=5d8dabb59db77a5d6ec81049900a83a65abcb87c;hpb=f92f1f0c20ca6ec520d43702ec5f51ca245d7ec9;p=libserialport.git

diff --git a/serialport.c b/serialport.c
index 5d8dabb..83cb529 100644
--- a/serialport.c
+++ b/serialport.c
@@ -51,9 +51,10 @@ struct sp_port_data {
 	DCB dcb;
 #else
 	struct termios term;
-	speed_t baud;
 	int rts;
+	int cts;
 	int dtr;
+	int dsr;
 #endif
 };
 
@@ -503,8 +504,24 @@ static int start_config(struct sp_port *port, struct sp_port_data *data)
 	if (!GetCommState(port->hdl, &data->dcb))
 		return SP_ERR_FAIL;
 #else
+	int controlbits;
+
 	if (tcgetattr(port->fd, &data->term) < 0)
 		return SP_ERR_FAIL;
+
+	if (ioctl(port->fd, TIOCMGET, &controlbits) < 0)
+		return SP_ERR_FAIL;
+
+	if (data->term.c_cflag & CRTSCTS) {
+		data->rts = SP_RTS_FLOW_CONTROL;
+		data->cts = SP_CTS_FLOW_CONTROL;
+	} else {
+		data->rts = (controlbits & TIOCM_RTS) ? SP_RTS_ON : SP_RTS_OFF;
+		data->cts = SP_CTS_IGNORE;
+	}
+
+	data->dtr = (controlbits & TIOCM_DTR) ? SP_DTR_ON : SP_DTR_OFF;
+	data->dsr = SP_DSR_IGNORE;
 #endif
 	return SP_OK;
 }
@@ -563,69 +580,77 @@ static int set_baudrate(struct sp_port_data *data, int baudrate)
 		return SP_ERR_ARG;
 	}
 #else
+	speed_t baud;
 	switch (baudrate) {
 	case 50:
-		data->baud = B50;
+		baud = B50;
 		break;
 	case 75:
-		data->baud = B75;
+		baud = B75;
 		break;
 	case 110:
-		data->baud = B110;
+		baud = B110;
 		break;
 	case 134:
-		data->baud = B134;
+		baud = B134;
 		break;
 	case 150:
-		data->baud = B150;
+		baud = B150;
 		break;
 	case 200:
-		data->baud = B200;
+		baud = B200;
 		break;
 	case 300:
-		data->baud = B300;
+		baud = B300;
 		break;
 	case 600:
-		data->baud = B600;
+		baud = B600;
 		break;
 	case 1200:
-		data->baud = B1200;
+		baud = B1200;
 		break;
 	case 1800:
-		data->baud = B1800;
+		baud = B1800;
 		break;
 	case 2400:
-		data->baud = B2400;
+		baud = B2400;
 		break;
 	case 4800:
-		data->baud = B4800;
+		baud = B4800;
 		break;
 	case 9600:
-		data->baud = B9600;
+		baud = B9600;
 		break;
 	case 19200:
-		data->baud = B19200;
+		baud = B19200;
 		break;
 	case 38400:
-		data->baud = B38400;
+		baud = B38400;
 		break;
 	case 57600:
-		data->baud = B57600;
+		baud = B57600;
 		break;
 	case 115200:
-		data->baud = B115200;
+		baud = B115200;
 		break;
 	case 230400:
-		data->baud = B230400;
+		baud = B230400;
 		break;
 #if !defined(__APPLE__) && !defined(__OpenBSD__)
 	case 460800:
-		data->baud = B460800;
+		baud = B460800;
 		break;
 #endif
 	default:
 		return SP_ERR_ARG;
 	}
+
+	if (cfsetospeed(&data->term, baud) < 0)
+		return SP_ERR_FAIL;
+
+	if (cfsetispeed(&data->term, baud) < 0)
+		return SP_ERR_FAIL;
+
 #endif
 	return SP_OK;
 }
@@ -720,39 +745,43 @@ static int set_stopbits(struct sp_port_data *data, int stopbits)
 	return SP_OK;
 }
 
-static int set_flowcontrol(struct sp_port_data *data, int flowcontrol)
+static int set_rts(struct sp_port_data *data, int rts)
 {
-#ifndef _WIN32
-	data->term.c_iflag &= ~(IXON | IXOFF | IXANY);
-	data->term.c_cflag &= ~CRTSCTS;
-	switch (flowcontrol) {
-	case 0:
-		/* No flow control. */
+#ifdef _WIN32
+	switch (rts) {
+	case SP_RTS_OFF:
+		data->dcb.fRtsControl = RTS_CONTROL_DISABLE;
 		break;
-	case 1:
-		data->term.c_cflag |= CRTSCTS;
+	case SP_RTS_ON:
+		data->dcb.fRtsControl = RTS_CONTROL_ENABLE;
 		break;
-	case 2:
-		data->term.c_iflag |= IXON | IXOFF | IXANY;
+	case SP_RTS_FLOW_CONTROL:
+		data->dcb.fRtsControl = RTS_CONTROL_HANDSHAKE;
 		break;
 	default:
 		return SP_ERR_ARG;
 	}
+#else
+	data->rts = rts;
 #endif
 	return SP_OK;
 }
 
-static int set_rts(struct sp_port_data *data, int rts)
+static int set_cts(struct sp_port_data *data, int cts)
 {
 #ifdef _WIN32
-	if (rts != -1) {
-		if (rts)
-			data->dcb.fRtsControl = RTS_CONTROL_ENABLE;
-		else
-			data->dcb.fRtsControl = RTS_CONTROL_DISABLE;
+	switch (cts) {
+	case SP_CTS_IGNORE:
+		data->dcb.fOutxCtsFlow = FALSE;
+		break;
+	case SP_CTS_FLOW_CONTROL:
+		data->dcb.fOutxCtsFlow = TRUE;
+		break;
+	default:
+		return SP_ERR_ARG;
 	}
 #else
-	data->rts = rts;
+	data->cts = cts;
 #endif
 	return SP_OK;
 }
@@ -760,11 +789,18 @@ static int set_rts(struct sp_port_data *data, int rts)
 static int set_dtr(struct sp_port_data *data, int dtr)
 {
 #ifdef _WIN32
-	if (dtr != -1) {
-		if (dtr)
-			data->dcb.fDtrControl = DTR_CONTROL_ENABLE;
-		else
-			data->dcb.fDtrControl = DTR_CONTROL_DISABLE;
+	switch (dtr) {
+	case SP_DTR_OFF:
+		data->dcb.fDtrControl = DTR_CONTROL_DISABLE;
+		break;
+	case SP_DTR_ON:
+		data->dcb.fDtrControl = DTR_CONTROL_ENABLE;
+		break;
+	case SP_DTR_FLOW_CONTROL:
+		data->dcb.fDtrControl = DTR_CONTROL_HANDSHAKE;
+		break;
+	default:
+		return SP_ERR_ARG;
 	}
 #else
 	data->dtr = dtr;
@@ -772,6 +808,69 @@ static int set_dtr(struct sp_port_data *data, int dtr)
 	return SP_OK;
 }
 
+static int set_dsr(struct sp_port_data *data, int dsr)
+{
+#ifdef _WIN32
+	switch (dsr) {
+	case SP_DSR_IGNORE:
+		data->dcb.fOutxDsrFlow = FALSE;
+		break;
+	case SP_DSR_FLOW_CONTROL:
+		data->dcb.fOutxDsrFlow = TRUE;
+		break;
+	default:
+		return SP_ERR_ARG;
+	}
+#else
+	data->dsr = dsr;
+#endif
+	return SP_OK;
+}
+
+static int set_xon_xoff(struct sp_port_data *data, int xon_xoff)
+{
+#ifdef _WIN32
+	switch (xon_xoff) {
+	case SP_XONXOFF_DISABLED:
+		data->dcb.fInX = FALSE;
+		data->dcb.fOutX = FALSE;
+		break;
+	case SP_XONXOFF_IN:
+		data->dcb.fInX = TRUE;
+		data->dcb.fOutX = FALSE;
+		break;
+	case SP_XONXOFF_OUT:
+		data->dcb.fInX = FALSE;
+		data->dcb.fOutX = TRUE;
+		break;
+	case SP_XONXOFF_INOUT:
+		data->dcb.fInX = TRUE;
+		data->dcb.fOutX = TRUE;
+		break;
+	default:
+		return SP_ERR_ARG;
+	}
+#else
+	data->term.c_iflag &= ~(IXON | IXOFF | IXANY);
+	switch (xon_xoff) {
+	case SP_XONXOFF_DISABLED:
+		break;
+	case SP_XONXOFF_IN:
+		data->term.c_iflag |= IXOFF;
+		break;
+	case SP_XONXOFF_OUT:
+		data->term.c_iflag |= IXON | IXANY;
+		break;
+	case SP_XONXOFF_INOUT:
+		data->term.c_iflag |= IXON | IXOFF | IXANY;
+		break;
+	default:
+		return SP_ERR_ARG;
+	}
+#endif
+	return SP_OK;
+}
+
 static int apply_config(struct sp_port *port, struct sp_port_data *data)
 {
 #ifdef _WIN32
@@ -792,48 +891,53 @@ static int apply_config(struct sp_port *port, struct sp_port_data *data)
 	/* Ignore modem status lines; enable receiver */
 	data->term.c_cflag |= (CLOCAL | CREAD);
 
-	/* Write the configured settings. */
-	if (tcsetattr(port->fd, TCSADRAIN, &data->term) < 0)
-		return SP_ERR_FAIL;
-
-	if (cfsetospeed(&data->term, data->baud) < 0)
-		return SP_ERR_FAIL;
+	/* Asymmetric use of RTS/CTS not supported yet. */
+	if ((data->rts == SP_RTS_FLOW_CONTROL) != (data->cts == SP_CTS_FLOW_CONTROL))
+		return SP_ERR_ARG;
 
-	if (cfsetispeed(&data->term, data->baud) < 0)
-		return SP_ERR_FAIL;
+	/* DTR/DSR flow control not supported yet. */
+	if (data->dtr == SP_DTR_FLOW_CONTROL || data->dsr == SP_DSR_FLOW_CONTROL)
+		return SP_ERR_ARG;
 
-	if (data->rts != -1) {
+	if (data->rts == SP_RTS_FLOW_CONTROL)
+		data->term.c_iflag |= CRTSCTS;
+	else
+	{
 		controlbits = TIOCM_RTS;
-		if (ioctl(port->fd, data->rts ? TIOCMBIS : TIOCMBIC,
+		if (ioctl(port->fd, data->rts == SP_RTS_ON ? TIOCMBIS : TIOCMBIC,
 				&controlbits) < 0)
 			return SP_ERR_FAIL;
 	}
 
-	if (data->dtr != -1) {
-		controlbits = TIOCM_DTR;
-		if (ioctl(port->fd, data->dtr ? TIOCMBIS : TIOCMBIC,
-				&controlbits) < 0)
-			return SP_ERR_FAIL;
-	}
+	controlbits = TIOCM_DTR;
+	if (ioctl(port->fd, data->dtr == SP_DTR_ON ? TIOCMBIS : TIOCMBIC,
+			&controlbits) < 0)
+		return SP_ERR_FAIL;
+
+	/* Write the configured settings. */
+	if (tcsetattr(port->fd, TCSADRAIN, &data->term) < 0)
+		return SP_ERR_FAIL;
 #endif
 	return SP_OK;
 }
 
 #define TRY(x) do { int ret = x; if (ret != SP_OK) return ret; } while (0)
+#define TRY_SET(x) do { if (config->x >= 0) TRY(set_##x(&data, config->x)); } while (0)
 
-int sp_set_params(struct sp_port *port, int baudrate, int bits, int parity,
-		int stopbits, int flowcontrol, int rts, int dtr)
+int sp_set_config(struct sp_port *port, struct sp_port_config *config)
 {
 	struct sp_port_data data;
 
 	TRY(start_config(port, &data));
-	TRY(set_baudrate(&data, baudrate));
-	TRY(set_bits(&data, bits));
-	TRY(set_parity(&data, parity));
-	TRY(set_stopbits(&data, stopbits));
-	TRY(set_flowcontrol(&data, flowcontrol));
-	TRY(set_rts(&data, rts));
-	TRY(set_dtr(&data, dtr));
+	TRY_SET(baudrate);
+	TRY_SET(bits);
+	TRY_SET(parity);
+	TRY_SET(stopbits);
+	TRY_SET(rts);
+	TRY_SET(cts);
+	TRY_SET(dtr);
+	TRY_SET(dsr);
+	TRY_SET(xon_xoff);
 	TRY(apply_config(port, &data));
 
 	return SP_OK;