X-Git-Url: https://sigrok.org/gitweb/?a=blobdiff_plain;f=libsigrok.h;h=ab095c9a45630b83207f64bf0c86da386d3fb33c;hb=50cad98d1ba595d6e2da900dbe212b293a058189;hp=caa13757c32a9923976524a840c19cf64e025f1e;hpb=32c426d204e6133b19db486504beffd33a6f6548;p=libsigrok.git

diff --git a/libsigrok.h b/libsigrok.h
index caa13757..ab095c9a 100644
--- a/libsigrok.h
+++ b/libsigrok.h
@@ -145,6 +145,7 @@ enum {
 	SR_T_KEYVALUE,
 	SR_T_UINT64_RANGE,
 	SR_T_DOUBLE_RANGE,
+	SR_T_INT32,
 };
 
 /** Value for sr_datafeed_packet.type. */
@@ -682,6 +683,9 @@ enum {
 	/** The device can demodulate signals. */
 	SR_CONF_DEMODULATOR,
 
+	/** Programmable power supply. */
+	SR_CONF_POWER_SUPPLY,
+
 	/*--- Driver scan options -------------------------------------------*/
 
 	/**
@@ -785,7 +789,7 @@ enum {
 	/** Logic low-high threshold range. */
 	SR_CONF_VOLTAGE_THRESHOLD,
 
-	/** The device supports using a external clock. */
+	/** The device supports using an external clock. */
 	SR_CONF_EXTERNAL_CLOCK,
 
 	/**
@@ -794,11 +798,41 @@ enum {
 	 */
 	SR_CONF_SWAP,
 
-        /** Center frequency.
-         * The input signal is downmixed by this frequency before the ADC
-         * anti-aliasing filter.
-         */
-        SR_CONF_CENTER_FREQUENCY,
+	/** Center frequency.
+	 * The input signal is downmixed by this frequency before the ADC
+	 * anti-aliasing filter.
+	 */
+	SR_CONF_CENTER_FREQUENCY,
+
+	/** The device supports setting the number of logic probes. */
+	SR_CONF_NUM_LOGIC_PROBES,
+
+	/** The device supports setting the number of analog probes. */
+	SR_CONF_NUM_ANALOG_PROBES,
+
+	/** Output voltage. */
+	SR_CONF_OUTPUT_VOLTAGE,
+
+	/** Maximum output voltage. */
+	SR_CONF_OUTPUT_VOLTAGE_MAX,
+
+	/** Output current. */
+	SR_CONF_OUTPUT_CURRENT,
+
+	/** Maximum output current. */
+	SR_CONF_OUTPUT_CURRENT_MAX,
+
+	/** Enabling/disabling output. */
+	SR_CONF_OUTPUT_ENABLED,
+
+	/** Channel output configuration. */
+	SR_CONF_OUTPUT_CHANNEL,
+
+	/** Over-voltage protection (OVP) */
+	SR_CONF_OVER_VOLTAGE_PROTECTION,
+
+	/** Over-current protection (OCP) */
+	SR_CONF_OVER_CURRENT_PROTECTION,
 
 	/*--- Special stuff -------------------------------------------------*/
 
@@ -817,13 +851,11 @@ enum {
 	/** The device supports specifying the capturefile unit size. */
 	SR_CONF_CAPTURE_UNITSIZE,
 
-	/** The device supports setting the number of probes. */
-	SR_CONF_CAPTURE_NUM_PROBES,
-
 	/** Power off the device. */
 	SR_CONF_POWER_OFF,
 
-	/** Data source for acquisition. If not present, acquisition from
+	/**
+	 * Data source for acquisition. If not present, acquisition from
 	 * the device is always "live", i.e. acquisition starts when the
 	 * frontend asks and the results are sent out as soon as possible.
 	 *
@@ -832,7 +864,8 @@ enum {
 	 * there is a choice. sr_config_list() returns those choices.
 	 *
 	 * In any case if a device has live acquisition capabilities, it
-	 * is always the default. */
+	 * is always the default.
+	 */
 	SR_CONF_DATA_SOURCE,
 
 	/*--- Acquisition modes ---------------------------------------------*/
@@ -942,6 +975,9 @@ struct sr_dev_driver {
 	int (*config_set) (int id, GVariant *data,
 			const struct sr_dev_inst *sdi,
 			const struct sr_probe_group *probe_group);
+	int (*config_probe_set) (const struct sr_dev_inst *sdi,
+			struct sr_probe *probe, unsigned int changes);
+	int (*config_commit) (const struct sr_dev_inst *sdi);
 	int (*config_list) (int info_id, GVariant **data,
 			const struct sr_dev_inst *sdi,
 			const struct sr_probe_group *probe_group);