X-Git-Url: https://sigrok.org/gitweb/?a=blobdiff_plain;f=libsigrok.h;h=2f7047a426119ef1a4a909792c8244e138e46cce;hb=d1056603a00b92d12170e6e7d3da33473147c5f5;hp=79a767717f4d12746c4ad97cbb1dd9aeeb76ec02;hpb=409a811b8c078341185badadda8f4be380a5f88d;p=libsigrok.git

diff --git a/libsigrok.h b/libsigrok.h
index 79a76771..2f7047a4 100644
--- a/libsigrok.h
+++ b/libsigrok.h
@@ -72,6 +72,7 @@ enum {
 	SR_ERR_SAMPLERATE = -5, /**< Incorrect samplerate. */
 	SR_ERR_NA         = -6, /**< Not applicable. */
 	SR_ERR_DEV_CLOSED = -7, /**< Device is closed, but needs to be open. */
+	SR_ERR_TIMEOUT    = -8, /**< A timeout occurred. */
 
 	/*
 	 * Note: When adding entries here, don't forget to also update the
@@ -79,7 +80,6 @@ enum {
 	 */
 };
 
-#define SR_MAX_NUM_PROBES    64 /* Limited by uint64_t. */
 #define SR_MAX_PROBENAME_LEN 32
 
 /* Handy little macros */
@@ -141,6 +141,7 @@ enum {
 	SR_T_RATIONAL_PERIOD,
 	SR_T_RATIONAL_VOLT,
 	SR_T_KEYVALUE,
+	SR_T_UINT64_RANGE,
 };
 
 /** Value for sr_datafeed_packet.type. */
@@ -455,7 +456,7 @@ struct sr_output_format {
 	 * <code>data_out</code> parameter, so the caller knows not to try
 	 * and g_free() it.
 	 *
-	 * Note: This API call is obsolete, use recv() instead.
+	 * Note: This API call is obsolete, use receive() instead.
 	 *
 	 * @param o Pointer to the respective 'struct sr_output'.
 	 * @param data_in Pointer to the input data buffer.
@@ -487,7 +488,7 @@ struct sr_output_format {
 	 * it stored in the <code>data_out</code> and <code>length_out</code>
 	 * parameters, or NULL if no output was generated.
 	 *
-	 * Note: This API call is obsolete, use recv() instead.
+	 * Note: This API call is obsolete, use receive() instead.
 	 *
 	 * @param o Pointer to the respective 'struct sr_output'.
 	 * @param event_type Type of event that occured.
@@ -497,11 +498,35 @@ struct sr_output_format {
 	 * @return SR_OK upon success, a negative error code otherwise.
 	 */
 	int (*event) (struct sr_output *o, int event_type, uint8_t **data_out,
-		      uint64_t *length_out);
+			uint64_t *length_out);
 
-	GString *(*recv) (struct sr_output *o, const struct sr_dev_inst *sdi,
-			const struct sr_datafeed_packet *packet);
+	/**
+	 * This function is passed a copy of every packed in the data feed.
+	 * Any output generated by the output module in response to the
+	 * packet should be returned in a newly allocated GString
+	 * <code>out</code>, which will be freed by the caller.
+	 *
+	 * Packets not of interest to the output module can just be ignored,
+	 * and the <code>out</code> parameter set to NULL.
+	 *
+	 * @param o Pointer to the respective 'struct sr_output'.
+	 * @param sdi The device instance that generated the packet.
+	 * @param packet The complete packet.
+	 * @param out A pointer where a GString * should be stored if
+	 * the module generates output, or NULL if not.
+	 *
+	 * @return SR_OK upon success, a negative error code otherwise.
+	 */
+	int (*receive) (struct sr_output *o, const struct sr_dev_inst *sdi,
+			const struct sr_datafeed_packet *packet, GString **out);
 
+	/**
+	 * This function is called after the caller is finished using
+	 * the output module, and can be used to free any internal
+	 * resources the module may keep.
+	 *
+	 * @return SR_OK upon success, a negative error code otherwise.
+	 */
 	int (*cleanup) (struct sr_output *o);
 };
 
@@ -641,6 +666,21 @@ enum {
 	/** Number of vertical divisions, as related to SR_CONF_VDIV.  */
 	SR_CONF_NUM_VDIV,
 
+	/** Sound pressure level frequency weighting.  */
+	SR_CONF_SPL_WEIGHT_FREQ,
+
+	/** Sound pressure level time weighting.  */
+	SR_CONF_SPL_WEIGHT_TIME,
+
+	/** Sound pressure level measurement range.  */
+	SR_CONF_SPL_MEASUREMENT_RANGE,
+
+	/** Max hold mode. */
+	SR_CONF_HOLD_MAX,
+
+	/** Min hold mode. */
+	SR_CONF_HOLD_MIN,
+
 	/*--- Special stuff -------------------------------------------------*/
 
 	/** Scan options supported by the driver. */
@@ -661,6 +701,21 @@ enum {
 	/** The device supports setting the number of probes. */
 	SR_CONF_CAPTURE_NUM_PROBES,
 
+	/** Power off the device. */
+	SR_CONF_POWER_OFF,
+
+	/** Data source for acquisition. If not present, acquisition from
+	 * the device is always "live", i.e. acquisition starts when the
+	 * frontend asks and the results are sent out as soon as possible.
+	 *
+	 * If present, it indicates that either the device has no live
+	 * acquisition capability (for example a pure data logger), or
+	 * there is a choice. sr_config_list() returns those choices.
+	 *
+	 * In any case if a device has live acquisition capabilities, it
+	 * is always the default. */
+	SR_CONF_DATA_SOURCE,
+
 	/*--- Acquisition modes ---------------------------------------------*/
 
 	/**