X-Git-Url: https://sigrok.org/gitweb/?a=blobdiff_plain;f=include%2Flibsigrok%2Flibsigrok.h;h=c16278c407efb91a0eda0c90b23b90d1a503e3bb;hb=fe8c5aef1ffdadd45b31eecc84201ed3ed5402b7;hp=cfc515d8177a4cd7e984f330dba773720de1adb9;hpb=187c300b59f67f23f4ae6bad3f2102b2c1ae0b28;p=libsigrok.git

diff --git a/include/libsigrok/libsigrok.h b/include/libsigrok/libsigrok.h
index cfc515d8..c16278c4 100644
--- a/include/libsigrok/libsigrok.h
+++ b/include/libsigrok/libsigrok.h
@@ -233,6 +233,10 @@ enum sr_mq {
 	SR_MQ_MASS,
 	/** Harmonic ratio */
 	SR_MQ_HARMONIC_RATIO,
+	/** Energy. */
+	SR_MQ_ENERGY,
+	/** Electric charge. */
+	SR_MQ_ELECTRIC_CHARGE,
 
 	/* Update sr_key_info_mq[] (hwdriver.c) upon changes! */
 };
@@ -290,7 +294,7 @@ enum sr_unit {
 	SR_UNIT_VOLT_AMPERE,
 	/** Real power [W]. */
 	SR_UNIT_WATT,
-	/** Consumption [Wh]. */
+	/** Energy (consumption) in watt hour [Wh]. */
 	SR_UNIT_WATT_HOUR,
 	/** Wind speed in meters per second. */
 	SR_UNIT_METER_SECOND,
@@ -324,6 +328,12 @@ enum sr_unit {
 	SR_UNIT_TOLA,
 	/** Pieces (number of items). */
 	SR_UNIT_PIECE,
+	/** A relative unit of (power) measurement [dB]. */
+	SR_UNIT_JOULE,
+	/** Electric charge in coulomb. */
+	SR_UNIT_COULOMB,
+	/** Electric charge in ampere hour [Ah]. */
+	SR_UNIT_AMPERE_HOUR,
 
 	/*
 	 * Update unit_strings[] (analog.c) and fancyprint() (output/analog.c)
@@ -650,11 +660,11 @@ struct sr_key_info {
 /** Configuration capabilities. */
 enum sr_configcap {
 	/** Value can be read. */
-	SR_CONF_GET = (1 << 31),
+	SR_CONF_GET = (1UL << 31),
 	/** Value can be written. */
-	SR_CONF_SET = (1 << 30),
+	SR_CONF_SET = (1UL << 30),
 	/** Possible values can be enumerated. */
-	SR_CONF_LIST = (1 << 29),
+	SR_CONF_LIST = (1UL << 29),
 };
 
 /** Configuration keys */
@@ -751,6 +761,16 @@ enum sr_configkey {
 	 */
 	SR_CONF_MODBUSADDR,
 
+	/**
+	 * User specified forced driver attachment to unknown devices.
+	 *
+	 * By design the interpretation of the string depends on the
+	 * specific driver. It typically would be either a replacement
+	 * '*IDN?' response value, or a sub-driver name. But could also
+	 * be anything else and totally arbitrary.
+	 */
+	SR_CONF_FORCE_DETECT,
+
 	/* Update sr_key_info_config[] (hwdriver.c) upon changes! */
 
 	/*--- Device (or channel group) configuration -----------------------*/
@@ -956,6 +976,8 @@ enum sr_configkey {
 	 * Channel regulation
 	 * get: "CV", "CC" or "UR", denoting constant voltage, constant current
 	 *      or unregulated.
+	 *      "CC-" denotes a power supply in current sink mode (e.g. HP 66xxB).
+	 *      "" is used when there is no regulation, e.g. the output is disabled.
 	 */
 	SR_CONF_REGULATION,
 
@@ -989,6 +1011,36 @@ enum sr_configkey {
 	/** Under-voltage condition threshold. */
 	SR_CONF_UNDER_VOLTAGE_CONDITION_THRESHOLD,
 
+	/**
+	 * Which external clock source to use if the device supports
+	 * multiple external clock channels.
+	 */
+	SR_CONF_EXTERNAL_CLOCK_SOURCE,
+
+	/** Offset of a source without strictly-defined MQ. */
+	SR_CONF_OFFSET,
+
+	/** The device supports setting a pattern for the logic trigger. */
+	SR_CONF_TRIGGER_PATTERN,
+
+	/** High resolution mode. */
+	SR_CONF_HIGH_RESOLUTION,
+
+	/** Peak detection. */
+	SR_CONF_PEAK_DETECTION,
+
+	/** Logic threshold: predefined levels (TTL, ECL, CMOS, etc). */
+	SR_CONF_LOGIC_THRESHOLD,
+
+	/** Logic threshold: custom numerical value. */
+	SR_CONF_LOGIC_THRESHOLD_CUSTOM,
+
+	/** The measurement range of a DMM or the output range of a power supply. */
+	SR_CONF_RANGE,
+
+	/** The number of digits (e.g. for a DMM). */
+	SR_CONF_DIGITS,
+
 	/* Update sr_key_info_config[] (hwdriver.c) upon changes! */
 
 	/*--- Special stuff -------------------------------------------------*/