X-Git-Url: https://sigrok.org/gitweb/?a=blobdiff_plain;f=include%2Flibsigrok%2Flibsigrok.h;h=63e60fba3ef5ea796a1a97b6038b266652c49aa3;hb=75772c721d45d3b33618388e41d2d874c4f88302;hp=ccb8602fca64a680e1dc1e7bbbdb94def13a9692;hpb=2fb60e23299037456a626ad65d15b89a78393917;p=libsigrok.git

diff --git a/include/libsigrok/libsigrok.h b/include/libsigrok/libsigrok.h
index ccb8602f..63e60fba 100644
--- a/include/libsigrok/libsigrok.h
+++ b/include/libsigrok/libsigrok.h
@@ -78,10 +78,7 @@ enum sr_error_code {
 	SR_ERR_DATA          =-10, /**< Data is invalid.  */
 	SR_ERR_IO            =-11, /**< Input/output error. */
 
-	/*
-	 * Note: When adding entries here, don't forget to also update the
-	 * sr_strerror() and sr_strerror_name() functions in error.c.
-	 */
+	/* Update sr_strerror()/sr_strerror_name() (error.c) upon changes! */
 };
 
 #define SR_MAX_CHANNELNAME_LEN 32
@@ -149,6 +146,9 @@ enum sr_datatype {
 	SR_T_UINT64_RANGE,
 	SR_T_DOUBLE_RANGE,
 	SR_T_INT32,
+	SR_T_MQ,
+
+	/* Update sr_variant_type_get() (hwdriver.c) upon changes! */
 };
 
 /** Value for sr_datafeed_packet.type. */
@@ -171,6 +171,8 @@ enum sr_packettype {
 	SR_DF_FRAME_END,
 	/** Payload is struct sr_datafeed_analog2. */
 	SR_DF_ANALOG2,
+
+	/* Update datafeed_dump() (session.c) upon changes! */
 };
 
 /** Measured quantity, sr_datafeed_analog.mq. */
@@ -230,6 +232,10 @@ enum sr_mq {
 	SR_MQ_POWER_FACTOR,
 	/** Apparent power */
 	SR_MQ_APPARENT_POWER,
+	/** Mass */
+	SR_MQ_MASS,
+
+	/* Update sr_key_info_mq[] (hwdriver.c) upon changes! */
 };
 
 /** Unit of measured quantity, sr_datafeed_analog.unit. */
@@ -297,6 +303,33 @@ enum sr_unit {
 	SR_UNIT_DEGREE,
 	/** Henry (inductance). */
 	SR_UNIT_HENRY,
+	/** Mass in gram [g]. */
+	SR_UNIT_GRAM,
+	/** Mass in carat [ct]. */
+	SR_UNIT_CARAT,
+	/** Mass in ounce [oz]. */
+	SR_UNIT_OUNCE,
+	/** Mass in troy ounce [oz t]. */
+	SR_UNIT_TROY_OUNCE,
+	/** Mass in pound [lb]. */
+	SR_UNIT_POUND,
+	/** Mass in pennyweight [dwt]. */
+	SR_UNIT_PENNYWEIGHT,
+	/** Mass in grain [gr]. */
+	SR_UNIT_GRAIN,
+	/** Mass in tael (variants: Hong Kong, Singapore/Malaysia, Taiwan) */
+	SR_UNIT_TAEL,
+	/** Mass in momme. */
+	SR_UNIT_MOMME,
+	/** Mass in tola. */
+	SR_UNIT_TOLA,
+	/** Pieces (number of items). */
+	SR_UNIT_PIECE,
+
+	/*
+	 * Update unit_strings[] (analog.c) and fancyprint() (output/analog.c)
+	 * upon changes!
+	 */
 };
 
 /** Values for sr_datafeed_analog.flags. */
@@ -349,6 +382,13 @@ enum sr_mqflag {
 	SR_MQFLAG_AVG = 0x40000,
 	/** Reference value shown. */
 	SR_MQFLAG_REFERENCE = 0x80000,
+	/** Unstable value (hasn't settled yet). */
+	SR_MQFLAG_UNSTABLE = 0x100000,
+
+	/*
+	 * Update mq_strings[] (analog.c) and fancyprint() (output/analog.c)
+	 * upon changes!
+	 */
 };
 
 enum sr_trigger_matches {
@@ -576,6 +616,8 @@ struct sr_config {
 
 enum sr_keytype {
 	SR_KEY_CONFIG,
+	SR_KEY_MQ,
+	SR_KEY_MQFLAGS,
 };
 
 /** Information about a key. */
@@ -637,6 +679,11 @@ enum sr_configkey {
 	/** The device can act as an electronic load. */
 	SR_CONF_ELECTRONIC_LOAD,
 
+	/** The device can act as a scale. */
+	SR_CONF_SCALE,
+
+	/* Update sr_key_info_config[] (hwdriver.c) upon changes! */
+
 	/*--- Driver scan options -------------------------------------------*/
 
 	/**
@@ -680,6 +727,8 @@ enum sr_configkey {
 	 */
 	SR_CONF_MODBUSADDR,
 
+	/* Update sr_key_info_config[] (hwdriver.c) upon changes! */
+
 	/*--- Device (or channel group) configuration -----------------------*/
 
 	/** The device supports setting its samplerate, in Hz. */
@@ -892,6 +941,9 @@ enum sr_configkey {
 	/** Output frequency in Hz. */
 	SR_CONF_OUTPUT_FREQUENCY,
 
+	/** Output frequency target in Hz. */
+	SR_CONF_OUTPUT_FREQUENCY_TARGET,
+
 	/** Measured quantity. */
 	SR_CONF_MEASURED_QUANTITY,
 
@@ -901,12 +953,11 @@ enum sr_configkey {
 	/** Equivalent circuit model. */
 	SR_CONF_EQUIV_CIRCUIT_MODEL,
 
-	/* Output frequency target in Hz. */
-	SR_CONF_OUTPUT_FREQUENCY_TARGET,
-
 	/** Over-temperature protection (OTP) active. */
 	SR_CONF_OVER_TEMPERATURE_PROTECTION_ACTIVE,
 
+	/* Update sr_key_info_config[] (hwdriver.c) upon changes! */
+
 	/*--- Special stuff -------------------------------------------------*/
 
 	/** Scan options supported by the driver. */
@@ -944,6 +995,8 @@ enum sr_configkey {
 	/** The device supports setting a probe factor. */
 	SR_CONF_PROBE_FACTOR,
 
+	/* Update sr_key_info_config[] (hwdriver.c) upon changes! */
+
 	/*--- Acquisition modes, sample limiting ----------------------------*/
 
 	/**
@@ -980,6 +1033,8 @@ enum sr_configkey {
 
 	/** Self test mode. */
 	SR_CONF_TEST_MODE,
+
+	/* Update sr_key_info_config[] (hwdriver.c) upon changes! */
 };
 
 /**