X-Git-Url: https://sigrok.org/gitweb/?a=blobdiff_plain;f=i2c%2Fa2_dummy_write%2FREADME;h=d0880febcd8d0a3ae7b3a2dd8114060852e01547;hb=3b25efe5be898dcb4d27ee4f2cb53b4a49ef56ea;hp=73e9b8810febd9a3889549434b8faf985b54a503;hpb=f793c6d26e576d436b93b3414a00b9d2fcdcdaba;p=sigrok-dumps.git

diff --git a/i2c/a2_dummy_write/README b/i2c/a2_dummy_write/README
index 73e9b88..d0880fe 100644
--- a/i2c/a2_dummy_write/README
+++ b/i2c/a2_dummy_write/README
@@ -2,16 +2,15 @@
 Dummy I2C writes
 -------------------------------------------------------------------------------
 
-This an example capture of some dummy I2C traffic, where the master writes
-to a slave at address 0x51 (or 0x2a, if the read/write bit is included)
-in an infinite loop. The slave does not respond.
+This is an example capture of some dummy I2C traffic, where the master writes
+to a slave (an RTC) at address 0x51 (or 0x2a, if the read/write bit is
+included) in an infinite loop. The slave does not respond.
 
 
 Logic analyzer setup
 --------------------
 
-The logic analyzer used for capturing was a ChronoVu LA8 at a sample rate
-of 1MHz. The logic analyzer probes were connected to the I2C pins like this:
+The logic analyzer used was a ChronoVu LA8 (at 1MHz):
 
   Probe       RTC chip pin
   ------------------------