X-Git-Url: https://sigrok.org/gitweb/?a=blobdiff_plain;f=hardware%2Fsaleae-logic%2Fsaleae-logic.c;h=173e8adaa8456cd7ef226ec91f166da0f3f95c8e;hb=86f5e3d826fc9059e110f07221cb1a30652ceac2;hp=ba50ee94ea3ea6af15b47360d9cf2588eaf58ec7;hpb=17e1afcb81b8581091fcb660c2e61f05c75e00b5;p=libsigrok.git
diff --git a/hardware/saleae-logic/saleae-logic.c b/hardware/saleae-logic/saleae-logic.c
index ba50ee94..173e8ada 100644
--- a/hardware/saleae-logic/saleae-logic.c
+++ b/hardware/saleae-logic/saleae-logic.c
@@ -17,6 +17,7 @@
* along with this program. If not, see .
*/
+#include "config.h"
#include
#include
#include
@@ -24,7 +25,7 @@
#include
#include
#include
-#include "config.h"
+#include
#define USB_VENDOR 0x0925
#define USB_PRODUCT 0x3881
@@ -49,16 +50,16 @@
/* There is only one model Saleae Logic, and this is what it supports: */
static int capabilities[] = {
- HWCAP_LOGIC_ANALYZER,
- HWCAP_SAMPLERATE,
+ SR_HWCAP_LOGIC_ANALYZER,
+ SR_HWCAP_SAMPLERATE,
/* These are really implemented in the driver, not the hardware. */
- HWCAP_LIMIT_SAMPLES,
- HWCAP_CONTINUOUS,
+ SR_HWCAP_LIMIT_SAMPLES,
+ SR_HWCAP_CONTINUOUS,
0,
};
-/* List of struct sigrok_device_instance, maintained by opendev()/closedev(). */
+/* List of struct sr_device_instance, maintained by opendev()/closedev(). */
static GSList *device_instances = NULL;
/*
@@ -67,28 +68,28 @@ static GSList *device_instances = NULL;
* upgrade -- this is like a global lock. No device will open until a proper
* delay after the last device was upgraded.
*/
-GTimeVal firmware_updated = { 0, 0 };
+static GTimeVal firmware_updated = { 0, 0 };
static libusb_context *usb_context = NULL;
static uint64_t supported_samplerates[] = {
- KHZ(200),
- KHZ(250),
- KHZ(500),
- MHZ(1),
- MHZ(2),
- MHZ(4),
- MHZ(8),
- MHZ(12),
- MHZ(16),
- MHZ(24),
+ SR_KHZ(200),
+ SR_KHZ(250),
+ SR_KHZ(500),
+ SR_MHZ(1),
+ SR_MHZ(2),
+ SR_MHZ(4),
+ SR_MHZ(8),
+ SR_MHZ(12),
+ SR_MHZ(16),
+ SR_MHZ(24),
0,
};
-static struct samplerates samplerates = {
- KHZ(200),
- MHZ(24),
- 0,
+static struct sr_samplerates samplerates = {
+ SR_KHZ(200),
+ SR_MHZ(24),
+ SR_HZ(0),
supported_samplerates,
};
@@ -100,7 +101,7 @@ static uint8_t trigger_mask[NUM_TRIGGER_STAGES] = { 0 };
static uint8_t trigger_value[NUM_TRIGGER_STAGES] = { 0 };
static uint8_t trigger_buffer[NUM_TRIGGER_STAGES] = { 0 };
-int trigger_stage = TRIGGER_FIRED;
+static int trigger_stage = TRIGGER_FIRED;
static int hw_set_configuration(int device_index, int capability, void *value);
static void hw_stop_acquisition(int device_index, gpointer session_device_id);
@@ -111,7 +112,7 @@ static void hw_stop_acquisition(int device_index, gpointer session_device_id);
* @return 1 if the device's configuration profile match the Logic firmware's
* configuration, 0 otherwise.
*/
-int check_conf_profile(libusb_device *dev)
+static int check_conf_profile(libusb_device *dev)
{
struct libusb_device_descriptor des;
struct libusb_config_descriptor *conf_dsc = NULL;
@@ -165,18 +166,18 @@ int check_conf_profile(libusb_device *dev)
return ret;
}
-struct sigrok_device_instance *sl_open_device(int device_index)
+static struct sr_device_instance *sl_open_device(int device_index)
{
- struct sigrok_device_instance *sdi;
+ struct sr_device_instance *sdi;
libusb_device **devlist;
struct libusb_device_descriptor des;
int err, skip, i;
- if (!(sdi = get_sigrok_device_instance(device_instances, device_index)))
+ if (!(sdi = sr_get_device_instance(device_instances, device_index)))
return NULL;
libusb_get_device_list(usb_context, &devlist);
- if (sdi->status == ST_INITIALIZING) {
+ if (sdi->status == SR_ST_INITIALIZING) {
/*
* This device was renumerating last time we touched it.
* opendev() guarantees we've waited long enough for it to
@@ -190,7 +191,7 @@ struct sigrok_device_instance *sl_open_device(int device_index)
&skip, USB_VENDOR, USB_PRODUCT,
USB_INTERFACE);
}
- } else if (sdi->status == ST_INACTIVE) {
+ } else if (sdi->status == SR_ST_INACTIVE) {
/*
* This device is fully enumerated, so we need to find this
* device by vendor, product, bus and address.
@@ -202,18 +203,18 @@ struct sigrok_device_instance *sl_open_device(int device_index)
USB_PRODUCT, USB_INTERFACE);
}
} else {
- /* Status must be ST_ACTIVE, i.e. already in use... */
+ /* Status must be SR_ST_ACTIVE, i.e. already in use... */
sdi = NULL;
}
libusb_free_device_list(devlist, 1);
- if (sdi && sdi->status != ST_ACTIVE)
+ if (sdi && sdi->status != SR_ST_ACTIVE)
sdi = NULL;
return sdi;
}
-int upload_firmware(libusb_device *dev)
+static int upload_firmware(libusb_device *dev)
{
int ret;
@@ -227,22 +228,22 @@ int upload_firmware(libusb_device *dev)
return 0;
}
-static void close_device(struct sigrok_device_instance *sdi)
+static void close_device(struct sr_device_instance *sdi)
{
if (sdi->usb->devhdl == NULL)
return;
- g_message("saleae: closing device %d on %d.%d interface %d", sdi->index,
- sdi->usb->bus, sdi->usb->address, USB_INTERFACE);
+ sr_info("saleae: closing device %d on %d.%d interface %d", sdi->index,
+ sdi->usb->bus, sdi->usb->address, USB_INTERFACE);
libusb_release_interface(sdi->usb->devhdl, USB_INTERFACE);
libusb_close(sdi->usb->devhdl);
sdi->usb->devhdl = NULL;
- sdi->status = ST_INACTIVE;
+ sdi->status = SR_ST_INACTIVE;
}
static int configure_probes(GSList *probes)
{
- struct probe *probe;
+ struct sr_probe *probe;
GSList *l;
int probe_bit, stage, i;
char *tc;
@@ -255,7 +256,7 @@ static int configure_probes(GSList *probes)
stage = -1;
for (l = probes; l; l = l->next) {
- probe = (struct probe *)l->data;
+ probe = (struct sr_probe *)l->data;
if (probe->enabled == FALSE)
continue;
probe_bit = 1 << (probe->index - 1);
@@ -270,7 +271,7 @@ static int configure_probes(GSList *probes)
trigger_value[stage] |= probe_bit;
stage++;
if (stage > NUM_TRIGGER_STAGES)
- return SIGROK_ERR;
+ return SR_ERR;
}
}
@@ -283,16 +284,16 @@ static int configure_probes(GSList *probes)
else
trigger_stage = 0;
- return SIGROK_OK;
+ return SR_OK;
}
/*
* API callbacks
*/
-static int hw_init(char *deviceinfo)
+static int hw_init(const char *deviceinfo)
{
- struct sigrok_device_instance *sdi;
+ struct sr_device_instance *sdi;
struct libusb_device_descriptor des;
libusb_device **devlist;
int err, devcnt, i;
@@ -301,7 +302,7 @@ static int hw_init(char *deviceinfo)
deviceinfo = deviceinfo;
if (libusb_init(&usb_context) != 0) {
- g_warning("Failed to initialize USB.");
+ sr_warn("Failed to initialize USB.");
return 0;
}
@@ -311,14 +312,14 @@ static int hw_init(char *deviceinfo)
for (i = 0; devlist[i]; i++) {
err = libusb_get_device_descriptor(devlist[i], &des);
if (err != 0) {
- g_warning("failed to get device descriptor: %d", err);
+ sr_warn("failed to get device descriptor: %d", err);
continue;
}
if (des.idVendor != USB_VENDOR || des.idProduct != USB_PRODUCT)
continue; /* Not a Saleae Logic... */
- sdi = sigrok_device_instance_new(devcnt, ST_INITIALIZING,
+ sdi = sr_device_instance_new(devcnt, SR_ST_INITIALIZING,
USB_VENDOR_NAME, USB_MODEL_NAME, USB_MODEL_VERSION);
if (!sdi)
return 0;
@@ -331,14 +332,14 @@ static int hw_init(char *deviceinfo)
* or uploading the firmware again.
*/
if (upload_firmware(devlist[i]) > 0)
- g_warning("firmware upload failed for "
- "device %d", devcnt);
+ sr_warn("firmware upload failed for device %d",
+ devcnt);
- sdi->usb = usb_device_instance_new
+ sdi->usb = sr_usb_device_instance_new
(libusb_get_bus_number(devlist[i]), 0, NULL);
} else {
/* Already has the firmware, so fix the new address. */
- sdi->usb = usb_device_instance_new
+ sdi->usb = sr_usb_device_instance_new
(libusb_get_bus_number(devlist[i]),
libusb_get_device_address(devlist[i]), NULL);
}
@@ -352,7 +353,7 @@ static int hw_init(char *deviceinfo)
static int hw_opendev(int device_index)
{
GTimeVal cur_time;
- struct sigrok_device_instance *sdi;
+ struct sr_device_instance *sdi;
int timediff, err;
unsigned int cur, upd;
@@ -365,39 +366,39 @@ static int hw_opendev(int device_index)
timediff = cur - upd;
if (timediff < FIRMWARE_RENUM_DELAY) {
timediff = FIRMWARE_RENUM_DELAY - timediff;
- g_message("saleae: waiting %d ms for device to reset",
- timediff);
+ sr_info("saleae: waiting %d ms for device to reset",
+ timediff);
g_usleep(timediff * 1000);
firmware_updated.tv_sec = 0;
}
}
if (!(sdi = sl_open_device(device_index))) {
- g_warning("unable to open device");
- return SIGROK_ERR;
+ sr_warn("unable to open device");
+ return SR_ERR;
}
err = libusb_claim_interface(sdi->usb->devhdl, USB_INTERFACE);
if (err != 0) {
- g_warning("Unable to claim interface: %d", err);
- return SIGROK_ERR;
+ sr_warn("Unable to claim interface: %d", err);
+ return SR_ERR;
}
if (cur_samplerate == 0) {
/* Samplerate hasn't been set; default to the slowest one. */
- if (hw_set_configuration(device_index, HWCAP_SAMPLERATE,
- &supported_samplerates[0]) == SIGROK_ERR)
- return SIGROK_ERR;
+ if (hw_set_configuration(device_index, SR_HWCAP_SAMPLERATE,
+ &supported_samplerates[0]) == SR_ERR)
+ return SR_ERR;
}
- return SIGROK_OK;
+ return SR_OK;
}
static void hw_closedev(int device_index)
{
- struct sigrok_device_instance *sdi;
+ struct sr_device_instance *sdi;
- if ((sdi = get_sigrok_device_instance(device_instances, device_index)))
+ if ((sdi = sr_get_device_instance(device_instances, device_index)))
close_device(sdi);
}
@@ -407,7 +408,7 @@ static void hw_cleanup(void)
/* Properly close all devices... */
for (l = device_instances; l; l = l->next)
- close_device((struct sigrok_device_instance *)l->data);
+ close_device((struct sr_device_instance *)l->data);
/* ...and free all their memory. */
for (l = device_instances; l; l = l->next)
@@ -422,26 +423,26 @@ static void hw_cleanup(void)
static void *hw_get_device_info(int device_index, int device_info_id)
{
- struct sigrok_device_instance *sdi;
+ struct sr_device_instance *sdi;
void *info = NULL;
- if (!(sdi = get_sigrok_device_instance(device_instances, device_index)))
+ if (!(sdi = sr_get_device_instance(device_instances, device_index)))
return NULL;
switch (device_info_id) {
- case DI_INSTANCE:
+ case SR_DI_INSTANCE:
info = sdi;
break;
- case DI_NUM_PROBES:
+ case SR_DI_NUM_PROBES:
info = GINT_TO_POINTER(NUM_PROBES);
break;
- case DI_SAMPLERATES:
+ case SR_DI_SAMPLERATES:
info = &samplerates;
break;
- case DI_TRIGGER_TYPES:
+ case SR_DI_TRIGGER_TYPES:
info = TRIGGER_TYPES;
break;
- case DI_CUR_SAMPLERATE:
+ case SR_DI_CUR_SAMPLERATE:
info = &cur_samplerate;
break;
}
@@ -451,13 +452,13 @@ static void *hw_get_device_info(int device_index, int device_info_id)
static int hw_get_status(int device_index)
{
- struct sigrok_device_instance *sdi;
+ struct sr_device_instance *sdi;
- sdi = get_sigrok_device_instance(device_instances, device_index);
+ sdi = sr_get_device_instance(device_instances, device_index);
if (sdi)
return sdi->status;
else
- return ST_NOT_FOUND;
+ return SR_ST_NOT_FOUND;
}
static int *hw_get_capabilities(void)
@@ -465,7 +466,7 @@ static int *hw_get_capabilities(void)
return capabilities;
}
-static int set_configuration_samplerate(struct sigrok_device_instance *sdi,
+static int set_configuration_samplerate(struct sr_device_instance *sdi,
uint64_t samplerate)
{
uint8_t divider;
@@ -477,45 +478,45 @@ static int set_configuration_samplerate(struct sigrok_device_instance *sdi,
break;
}
if (supported_samplerates[i] == 0)
- return SIGROK_ERR_SAMPLERATE;
+ return SR_ERR_SAMPLERATE;
divider = (uint8_t) (48 / (samplerate / 1000000.0)) - 1;
- g_message("saleae: setting samplerate to %" PRIu64 " Hz (divider %d)",
- samplerate, divider);
+ sr_info("saleae: setting samplerate to %" PRIu64 " Hz (divider %d)",
+ samplerate, divider);
buf[0] = 0x01;
buf[1] = divider;
ret = libusb_bulk_transfer(sdi->usb->devhdl, 1 | LIBUSB_ENDPOINT_OUT,
buf, 2, &result, 500);
if (ret != 0) {
- g_warning("failed to set samplerate: %d", ret);
- return SIGROK_ERR;
+ sr_warn("failed to set samplerate: %d", ret);
+ return SR_ERR;
}
cur_samplerate = samplerate;
- return SIGROK_OK;
+ return SR_OK;
}
static int hw_set_configuration(int device_index, int capability, void *value)
{
- struct sigrok_device_instance *sdi;
+ struct sr_device_instance *sdi;
int ret;
uint64_t *tmp_u64;
- if (!(sdi = get_sigrok_device_instance(device_instances, device_index)))
- return SIGROK_ERR;
+ if (!(sdi = sr_get_device_instance(device_instances, device_index)))
+ return SR_ERR;
- if (capability == HWCAP_SAMPLERATE) {
+ if (capability == SR_HWCAP_SAMPLERATE) {
tmp_u64 = value;
ret = set_configuration_samplerate(sdi, *tmp_u64);
- } else if (capability == HWCAP_PROBECONFIG) {
+ } else if (capability == SR_HWCAP_PROBECONFIG) {
ret = configure_probes((GSList *) value);
- } else if (capability == HWCAP_LIMIT_SAMPLES) {
+ } else if (capability == SR_HWCAP_LIMIT_SAMPLES) {
tmp_u64 = value;
limit_samples = *tmp_u64;
- ret = SIGROK_OK;
+ ret = SR_OK;
} else {
- ret = SIGROK_ERR;
+ ret = SR_ERR;
}
return ret;
@@ -540,7 +541,7 @@ void receive_transfer(struct libusb_transfer *transfer)
{
static int num_samples = 0;
static int empty_transfer_count = 0;
- struct datafeed_packet packet;
+ struct sr_datafeed_packet packet;
void *user_data;
int cur_buflen, trigger_offset, i;
unsigned char *cur_buf, *new_buf;
@@ -559,8 +560,8 @@ void receive_transfer(struct libusb_transfer *transfer)
return;
}
- g_message("saleae: receive_transfer(): status %d received %d bytes",
- transfer->status, transfer->actual_length);
+ sr_info("saleae: receive_transfer(): status %d received %d bytes",
+ transfer->status, transfer->actual_length);
/* Save incoming transfer before reusing the transfer struct. */
cur_buf = transfer->buffer;
@@ -568,12 +569,17 @@ void receive_transfer(struct libusb_transfer *transfer)
user_data = transfer->user_data;
/* Fire off a new request. */
- new_buf = g_malloc(4096);
+ if (!(new_buf = g_try_malloc(4096))) {
+ sr_err("saleae: %s: new_buf malloc failed", __func__);
+ // return SR_ERR_MALLOC;
+ return; /* FIXME */
+ }
+
transfer->buffer = new_buf;
transfer->length = 4096;
if (libusb_submit_transfer(transfer) != 0) {
/* TODO: Stop session? */
- g_warning("eek");
+ sr_warn("eek");
}
if (cur_buflen == 0) {
@@ -606,19 +612,19 @@ void receive_transfer(struct libusb_transfer *transfer)
* TODO: Send pre-trigger buffer to session bus.
* Tell the frontend we hit the trigger here.
*/
- packet.type = DF_TRIGGER;
+ packet.type = SR_DF_TRIGGER;
packet.length = 0;
- session_bus(user_data, &packet);
+ sr_session_bus(user_data, &packet);
/*
* Send the samples that triggered it, since we're
* skipping past them.
*/
- packet.type = DF_LOGIC;
+ packet.type = SR_DF_LOGIC;
packet.length = trigger_stage;
packet.unitsize = 1;
packet.payload = trigger_buffer;
- session_bus(user_data, &packet);
+ sr_session_bus(user_data, &packet);
trigger_stage = TRIGGER_FIRED;
break;
@@ -647,11 +653,11 @@ void receive_transfer(struct libusb_transfer *transfer)
if (trigger_stage == TRIGGER_FIRED) {
/* Send the incoming transfer to the session bus. */
- packet.type = DF_LOGIC;
+ packet.type = SR_DF_LOGIC;
packet.length = cur_buflen - trigger_offset;
packet.unitsize = 1;
packet.payload = cur_buf + trigger_offset;
- session_bus(user_data, &packet);
+ sr_session_bus(user_data, &packet);
g_free(cur_buf);
num_samples += cur_buflen;
@@ -668,26 +674,34 @@ void receive_transfer(struct libusb_transfer *transfer)
static int hw_start_acquisition(int device_index, gpointer session_device_id)
{
- struct sigrok_device_instance *sdi;
- struct datafeed_packet *packet;
- struct datafeed_header *header;
+ struct sr_device_instance *sdi;
+ struct sr_datafeed_packet *packet;
+ struct sr_datafeed_header *header;
struct libusb_transfer *transfer;
const struct libusb_pollfd **lupfd;
int size, i;
unsigned char *buf;
- if (!(sdi = get_sigrok_device_instance(device_instances, device_index)))
- return SIGROK_ERR;
+ if (!(sdi = sr_get_device_instance(device_instances, device_index)))
+ return SR_ERR;
- packet = g_malloc(sizeof(struct datafeed_packet));
- header = g_malloc(sizeof(struct datafeed_header));
- if (!packet || !header)
- return SIGROK_ERR;
+ if (!(packet = g_try_malloc(sizeof(struct sr_datafeed_packet)))) {
+ sr_err("saleae: %s: packet malloc failed", __func__);
+ return SR_ERR_MALLOC;
+ }
+
+ if (!(header = g_try_malloc(sizeof(struct sr_datafeed_header)))) {
+ sr_err("saleae: %s: header malloc failed", __func__);
+ return SR_ERR_MALLOC;
+ }
/* Start with 2K transfer, subsequently increased to 4K. */
size = 2048;
for (i = 0; i < NUM_SIMUL_TRANSFERS; i++) {
- buf = g_malloc(size);
+ if (!(buf = g_try_malloc(size))) {
+ sr_err("saleae: %s: buf malloc failed", __func__);
+ return SR_ERR_MALLOC;
+ }
transfer = libusb_alloc_transfer(0);
libusb_fill_bulk_transfer(transfer, sdi->usb->devhdl,
2 | LIBUSB_ENDPOINT_IN, buf, size,
@@ -696,61 +710,61 @@ static int hw_start_acquisition(int device_index, gpointer session_device_id)
/* TODO: Free them all. */
libusb_free_transfer(transfer);
g_free(buf);
- return SIGROK_ERR;
+ return SR_ERR;
}
size = 4096;
}
lupfd = libusb_get_pollfds(usb_context);
for (i = 0; lupfd[i]; i++)
- source_add(lupfd[i]->fd, lupfd[i]->events, 40, receive_data,
- NULL);
+ sr_source_add(lupfd[i]->fd, lupfd[i]->events, 40, receive_data,
+ NULL);
free(lupfd);
- packet->type = DF_HEADER;
- packet->length = sizeof(struct datafeed_header);
+ packet->type = SR_DF_HEADER;
+ packet->length = sizeof(struct sr_datafeed_header);
packet->payload = (unsigned char *)header;
header->feed_version = 1;
gettimeofday(&header->starttime, NULL);
header->samplerate = cur_samplerate;
- header->protocol_id = PROTO_RAW;
+ header->protocol_id = SR_PROTO_RAW;
header->num_logic_probes = NUM_PROBES;
header->num_analog_probes = 0;
- session_bus(session_device_id, packet);
+ sr_session_bus(session_device_id, packet);
g_free(header);
g_free(packet);
- return SIGROK_OK;
+ return SR_OK;
}
/* This stops acquisition on ALL devices, ignoring device_index. */
static void hw_stop_acquisition(int device_index, gpointer session_device_id)
{
- struct datafeed_packet packet;
+ struct sr_datafeed_packet packet;
/* Avoid compiler warnings. */
device_index = device_index;
- packet.type = DF_END;
- session_bus(session_device_id, &packet);
+ packet.type = SR_DF_END;
+ sr_session_bus(session_device_id, &packet);
receive_transfer(NULL);
/* TODO: Need to cancel and free any queued up transfers. */
}
-struct device_plugin saleae_logic_plugin_info = {
- "saleae-logic",
- 1,
- hw_init,
- hw_cleanup,
-
- hw_opendev,
- hw_closedev,
- hw_get_device_info,
- hw_get_status,
- hw_get_capabilities,
- hw_set_configuration,
- hw_start_acquisition,
- hw_stop_acquisition,
+struct sr_device_plugin saleae_logic_plugin_info = {
+ .name = "saleae-logic",
+ .longname = "Saleae Logic",
+ .api_version = 1,
+ .init = hw_init,
+ .cleanup = hw_cleanup,
+ .opendev = hw_opendev,
+ .closedev = hw_closedev,
+ .get_device_info = hw_get_device_info,
+ .get_status = hw_get_status,
+ .get_capabilities = hw_get_capabilities,
+ .set_configuration = hw_set_configuration,
+ .start_acquisition = hw_start_acquisition,
+ .stop_acquisition = hw_stop_acquisition,
};