X-Git-Url: https://sigrok.org/gitweb/?a=blobdiff_plain;f=hardware%2Fopenbench-logic-sniffer%2Fprotocol.c;h=71e8c34f0d082814e8fe915910feb5fef8bbe579;hb=61c39f54bbcae7bdde86ddb11b2fd0ff308d319b;hp=c8b416857e73aae52b57309bd496cc9ec3112184;hpb=503133bb5fcf9304d9bd93c023bc9c6c20c3aa0b;p=libsigrok.git diff --git a/hardware/openbench-logic-sniffer/protocol.c b/hardware/openbench-logic-sniffer/protocol.c index c8b41685..71e8c34f 100644 --- a/hardware/openbench-logic-sniffer/protocol.c +++ b/hardware/openbench-logic-sniffer/protocol.c @@ -18,6 +18,7 @@ */ #include "protocol.h" +#include extern SR_PRIV struct sr_dev_driver ols_driver_info; static struct sr_dev_driver *di = &ols_driver_info; @@ -74,6 +75,11 @@ SR_PRIV int ols_configure_probes(const struct sr_dev_inst *sdi) if (!probe->enabled) continue; + if (probe->index >= devc->max_probes) { + sr_err("Channels over the limit of %d\n", devc->max_probes); + return SR_ERR; + } + /* * Set up the probe mask for later configuration into the * flag register. @@ -297,10 +303,16 @@ SR_PRIV int ols_set_samplerate(const struct sr_dev_inst *sdi, return SR_ERR_SAMPLERATE; if (samplerate > CLOCK_RATE) { + sr_info("Enabling demux mode."); devc->flag_reg |= FLAG_DEMUX; + devc->flag_reg &= ~FLAG_FILTER; + devc->max_probes = NUM_PROBES / 2; devc->cur_samplerate_divider = (CLOCK_RATE * 2 / samplerate) - 1; } else { + sr_info("Disabling demux mode."); devc->flag_reg &= ~FLAG_DEMUX; + devc->flag_reg |= FLAG_FILTER; + devc->max_probes = NUM_PROBES; devc->cur_samplerate_divider = (CLOCK_RATE / samplerate) - 1; } @@ -323,7 +335,7 @@ SR_PRIV void abort_acquisition(const struct sr_dev_inst *sdi) struct sr_serial_dev_inst *serial; serial = sdi->conn; - sr_source_remove(serial->fd); + serial_source_remove(serial); /* Terminate session */ packet.type = SR_DF_END; @@ -340,8 +352,10 @@ SR_PRIV int ols_receive_data(int fd, int revents, void *cb_data) struct sr_dev_inst *sdi; GSList *l; uint32_t sample; - int num_channels, offset, i, j; + int num_channels, offset, j; + unsigned int i; unsigned char byte; + int serial_fd; drvc = di->priv; @@ -351,7 +365,8 @@ SR_PRIV int ols_receive_data(int fd, int revents, void *cb_data) sdi = l->data; devc = sdi->priv; serial = sdi->conn; - if (serial->fd == fd) + sp_get_port_handle(serial->data, &serial_fd); + if (serial_fd == fd) break; devc = NULL; } @@ -378,9 +393,11 @@ SR_PRIV int ols_receive_data(int fd, int revents, void *cb_data) } num_channels = 0; - for (i = 0x20; i > 0x02; i /= 2) { - if ((devc->flag_reg & i) == 0) + + for (i = NUM_PROBES; i > 0x02; i /= 2) { + if ((devc->flag_reg & i) == 0) { num_channels++; + } } if (revents == G_IO_IN && devc->num_samples < devc->limit_samples) { @@ -394,23 +411,22 @@ SR_PRIV int ols_receive_data(int fd, int revents, void *cb_data) devc->sample[devc->num_bytes++] = byte; sr_dbg("Received byte 0x%.2x.", byte); if (devc->num_bytes == num_channels) { - /* Got a full sample. */ + /* Got a full sample. Convert from the OLS's little-endian + * sample to the local format. */ sample = devc->sample[0] | (devc->sample[1] << 8) \ | (devc->sample[2] << 16) | (devc->sample[3] << 24); sr_dbg("Received sample 0x%.*x.", devc->num_bytes * 2, sample); if (devc->flag_reg & FLAG_RLE) { /* - * In RLE mode -1 should never come in as a - * sample, because bit 31 is the "count" flag. + * In RLE mode the high bit of the sample is the + * "count" flag, meaning this sample is the number + * of times the previous sample occurred. */ if (devc->sample[devc->num_bytes - 1] & 0x80) { - devc->sample[devc->num_bytes - 1] &= 0x7f; - /* - * FIXME: This will only work on - * little-endian systems. - */ + /* Clear the high bit. */ + sample &= ~(0x80 << (devc->num_bytes - 1) * 8); devc->rle_count = sample; - sr_dbg("RLE count: %d.", devc->rle_count); + sr_dbg("RLE count: %u.", devc->rle_count); devc->num_bytes = 0; return TRUE; } @@ -442,6 +458,9 @@ SR_PRIV int ols_receive_data(int fd, int revents, void *cb_data) * sample. */ devc->tmp_sample[i] = devc->sample[j++]; + } else if (devc->flag_reg & FLAG_DEMUX && (i > 2)) { + /* group 2 & 3 get added to 0 & 1 */ + devc->tmp_sample[i - 2] = devc->sample[j++]; } } memcpy(devc->sample, devc->tmp_sample, 4);