X-Git-Url: https://sigrok.org/gitweb/?a=blobdiff_plain;f=hardware%2Fopenbench-logic-sniffer%2Fprotocol.c;h=1c94b7ff6948e9103d7caa7cb66878b0f6a76bdd;hb=43cd4637285833706f8a404ca027bcf0ee75b9ae;hp=5e8dc76ace37667b50a3dbc9a60f7402f81494bb;hpb=625763e2c2b69f79b950ad0b0cd8b779500f5d95;p=libsigrok.git diff --git a/hardware/openbench-logic-sniffer/protocol.c b/hardware/openbench-logic-sniffer/protocol.c index 5e8dc76a..1c94b7ff 100644 --- a/hardware/openbench-logic-sniffer/protocol.c +++ b/hardware/openbench-logic-sniffer/protocol.c @@ -54,56 +54,61 @@ SR_PRIV int send_longcommand(struct sr_serial_dev_inst *serial, return SR_OK; } -SR_PRIV int ols_configure_probes(const struct sr_dev_inst *sdi) +/* Configures the channel mask based on which channels are enabled. */ +SR_PRIV void ols_channel_mask(const struct sr_dev_inst *sdi) { struct dev_context *devc; - const struct sr_probe *probe; + struct sr_channel *channel; const GSList *l; - int probe_bit, stage, i; - char *tc; devc = sdi->priv; - devc->probe_mask = 0; + devc->channel_mask = 0; + for (l = sdi->channels; l; l = l->next) { + channel = l->data; + if (channel->enabled) + devc->channel_mask |= 1 << channel->index; + } +} + +SR_PRIV int ols_convert_trigger(const struct sr_dev_inst *sdi) +{ + struct dev_context *devc; + struct sr_trigger *trigger; + struct sr_trigger_stage *stage; + struct sr_trigger_match *match; + const GSList *l, *m; + int i; + + devc = sdi->priv; + + devc->num_stages = 0; for (i = 0; i < NUM_TRIGGER_STAGES; i++) { devc->trigger_mask[i] = 0; devc->trigger_value[i] = 0; } - devc->num_stages = 0; - for (l = sdi->probes; l; l = l->next) { - probe = (const struct sr_probe *)l->data; - if (!probe->enabled) - continue; - - if (probe->index >= devc->max_probes) { - sr_err("Channels over the limit of %d\n", devc->max_probes); - return SR_ERR; - } + if (!(trigger = sr_session_trigger_get(sdi->session))) + return SR_OK; - /* - * Set up the probe mask for later configuration into the - * flag register. - */ - probe_bit = 1 << (probe->index); - devc->probe_mask |= probe_bit; - - if (!probe->trigger) - continue; - - /* Configure trigger mask and value. */ - stage = 0; - for (tc = probe->trigger; tc && *tc; tc++) { - devc->trigger_mask[stage] |= probe_bit; - if (*tc == '1') - devc->trigger_value[stage] |= probe_bit; - stage++; - /* Only supporting parallel mode, with up to 4 stages. */ - if (stage > 4) - return SR_ERR; + devc->num_stages = g_slist_length(trigger->stages); + if (devc->num_stages > NUM_TRIGGER_STAGES) { + sr_err("This device only supports %d trigger stages.", + NUM_TRIGGER_STAGES); + return SR_ERR; + } + + for (l = trigger->stages; l; l = l->next) { + stage = l->data; + for (m = stage->matches; m; m = m->next) { + match = m->data; + if (!match->channel->enabled) + /* Ignore disabled channels with a trigger. */ + continue; + devc->trigger_mask[stage->stage] |= 1 << match->channel->index; + if (match->match == SR_TRIGGER_ONE) + devc->trigger_value[stage->stage] |= 1 << match->channel->index; } - if (stage > devc->num_stages) - devc->num_stages = stage - 1; } return SR_OK; @@ -124,7 +129,7 @@ SR_PRIV struct dev_context *ols_dev_new(void) /* Acquisition settings */ devc->limit_samples = devc->capture_ratio = 0; devc->trigger_at = -1; - devc->probe_mask = 0xffffffff; + devc->channel_mask = 0xffffffff; devc->flag_reg = 0; return devc; @@ -134,7 +139,7 @@ SR_PRIV struct sr_dev_inst *get_metadata(struct sr_serial_dev_inst *serial) { struct sr_dev_inst *sdi; struct dev_context *devc; - struct sr_probe *probe; + struct sr_channel *ch; uint32_t tmp_int, ui; uint8_t key, type, token; GString *tmp_str, *devname, *version; @@ -201,12 +206,12 @@ SR_PRIV struct sr_dev_inst *get_metadata(struct sr_serial_dev_inst *serial) key, tmp_int); switch (token) { case 0x00: - /* Number of usable probes */ + /* Number of usable channels */ for (ui = 0; ui < tmp_int; ui++) { - if (!(probe = sr_probe_new(ui, SR_PROBE_LOGIC, TRUE, - ols_probe_names[ui]))) + if (!(ch = sr_channel_new(ui, SR_CHANNEL_LOGIC, TRUE, + ols_channel_names[ui]))) return 0; - sdi->probes = g_slist_append(sdi->probes, probe); + sdi->channels = g_slist_append(sdi->channels, ch); } break; case 0x01: @@ -239,12 +244,12 @@ SR_PRIV struct sr_dev_inst *get_metadata(struct sr_serial_dev_inst *serial) key, tmp_c); switch (token) { case 0x00: - /* Number of usable probes */ + /* Number of usable channels */ for (ui = 0; ui < tmp_c; ui++) { - if (!(probe = sr_probe_new(ui, SR_PROBE_LOGIC, TRUE, - ols_probe_names[ui]))) + if (!(ch = sr_channel_new(ui, SR_CHANNEL_LOGIC, TRUE, + ols_channel_names[ui]))) return 0; - sdi->probes = g_slist_append(sdi->probes, probe); + sdi->channels = g_slist_append(sdi->channels, ch); } break; case 0x01: @@ -284,13 +289,13 @@ SR_PRIV int ols_set_samplerate(const struct sr_dev_inst *sdi, sr_info("Enabling demux mode."); devc->flag_reg |= FLAG_DEMUX; devc->flag_reg &= ~FLAG_FILTER; - devc->max_probes = NUM_PROBES / 2; + devc->max_channels = NUM_CHANNELS / 2; devc->cur_samplerate_divider = (CLOCK_RATE * 2 / samplerate) - 1; } else { sr_info("Disabling demux mode."); devc->flag_reg &= ~FLAG_DEMUX; devc->flag_reg |= FLAG_FILTER; - devc->max_probes = NUM_PROBES; + devc->max_channels = NUM_CHANNELS; devc->cur_samplerate_divider = (CLOCK_RATE / samplerate) - 1; } @@ -313,7 +318,7 @@ SR_PRIV void abort_acquisition(const struct sr_dev_inst *sdi) struct sr_serial_dev_inst *serial; serial = sdi->conn; - serial_source_remove(serial); + serial_source_remove(sdi->session, serial); /* Terminate session */ packet.type = SR_DF_END; @@ -328,7 +333,7 @@ SR_PRIV int ols_receive_data(int fd, int revents, void *cb_data) struct sr_datafeed_packet packet; struct sr_datafeed_logic logic; uint32_t sample; - int num_channels, offset, j; + int num_ols_changrp, offset, j; unsigned int i; unsigned char byte; @@ -345,8 +350,9 @@ SR_PRIV int ols_receive_data(int fd, int revents, void *cb_data) * longer than it takes to send a byte, that means it's * finished. We'll double that to 30ms to be sure... */ - serial_source_remove(serial); - serial_source_add(serial, G_IO_IN, 30, ols_receive_data, cb_data); + serial_source_remove(sdi->session, serial); + serial_source_add(sdi->session, serial, G_IO_IN, 30, + ols_receive_data, cb_data); devc->raw_sample_buf = g_try_malloc(devc->limit_samples * 4); if (!devc->raw_sample_buf) { sr_err("Sample buffer malloc failed."); @@ -356,10 +362,10 @@ SR_PRIV int ols_receive_data(int fd, int revents, void *cb_data) memset(devc->raw_sample_buf, 0x82, devc->limit_samples * 4); } - num_channels = 0; - for (i = NUM_PROBES; i > 0x02; i /= 2) { + num_ols_changrp = 0; + for (i = NUM_CHANNELS; i > 0x02; i /= 2) { if ((devc->flag_reg & i) == 0) { - num_channels++; + num_ols_changrp++; } } @@ -374,7 +380,7 @@ SR_PRIV int ols_receive_data(int fd, int revents, void *cb_data) devc->sample[devc->num_bytes++] = byte; sr_spew("Received byte 0x%.2x.", byte); - if (devc->num_bytes == num_channels) { + if (devc->num_bytes == num_ols_changrp) { devc->cnt_samples++; devc->cnt_samples_rle++; /* @@ -407,7 +413,7 @@ SR_PRIV int ols_receive_data(int fd, int revents, void *cb_data) devc->num_samples = devc->limit_samples; } - if (num_channels < 4) { + if (num_ols_changrp < 4) { /* * Some channel groups may have been turned * off, to speed up transfer between the @@ -415,7 +421,7 @@ SR_PRIV int ols_receive_data(int fd, int revents, void *cb_data) * submitting it over the session bus -- * whatever is listening on the bus will be * expecting a full 32-bit sample, based on - * the number of probes. + * the number of channels. */ j = 0; memset(devc->tmp_sample, 0, 4);