X-Git-Url: https://sigrok.org/gitweb/?a=blobdiff_plain;f=hardware%2Fopenbench-logic-sniffer%2Fols.c;h=e139e0d381a186ab7e2ffc8f96ff3dccfc51151c;hb=38ba2522516b481fa3619bdec56d1e2a4b7a5f45;hp=601ab82f6d044f63abaa14339cf0e779a2837892;hpb=afc8e4deb68271ba7696e38cc02053b97cfc1a19;p=libsigrok.git diff --git a/hardware/openbench-logic-sniffer/ols.c b/hardware/openbench-logic-sniffer/ols.c index 601ab82f..e139e0d3 100644 --- a/hardware/openbench-logic-sniffer/ols.c +++ b/hardware/openbench-logic-sniffer/ols.c @@ -24,82 +24,89 @@ #include #include #include +#ifndef _WIN32 #include +#endif #include #include #include +#ifdef _WIN32 +/* TODO */ +#else #include +#endif #include -#include "sigrok.h" +#include -#define NUM_PROBES 32 +#define NUM_PROBES 32 #define NUM_TRIGGER_STAGES 4 #define TRIGGER_TYPES "01" #define SERIAL_SPEED B115200 /* TODO: SERIAL_ bits, parity, stop bit */ -#define CLOCK_RATE 100000000 +#define CLOCK_RATE 100000000 - -/* command opcodes */ -#define CMD_RESET 0x00 -#define CMD_ID 0x02 -#define CMD_SET_FLAGS 0x82 +/* Command opcodes */ +#define CMD_RESET 0x00 +#define CMD_ID 0x02 +#define CMD_SET_FLAGS 0x82 #define CMD_SET_DIVIDER 0x80 -#define CMD_RUN 0x01 -#define CMD_CAPTURE_SIZE 0x81 +#define CMD_RUN 0x01 +#define CMD_CAPTURE_SIZE 0x81 #define CMD_SET_TRIGGER_MASK_0 0xc0 #define CMD_SET_TRIGGER_MASK_1 0xc4 #define CMD_SET_TRIGGER_MASK_2 0xc8 #define CMD_SET_TRIGGER_MASK_3 0xcc -#define CMD_SET_TRIGGER_VALUE_0 0xc1 -#define CMD_SET_TRIGGER_VALUE_1 0xc5 -#define CMD_SET_TRIGGER_VALUE_2 0xc9 -#define CMD_SET_TRIGGER_VALUE_3 0xcd +#define CMD_SET_TRIGGER_VALUE_0 0xc1 +#define CMD_SET_TRIGGER_VALUE_1 0xc5 +#define CMD_SET_TRIGGER_VALUE_2 0xc9 +#define CMD_SET_TRIGGER_VALUE_3 0xcd #define CMD_SET_TRIGGER_CONFIG_0 0xc2 #define CMD_SET_TRIGGER_CONFIG_1 0xc6 #define CMD_SET_TRIGGER_CONFIG_2 0xca #define CMD_SET_TRIGGER_CONFIG_3 0xce -/* bitmasks for CMD_FLAGS */ -#define FLAG_DEMUX 0x01 +/* Bitmasks for CMD_FLAGS */ +#define FLAG_DEMUX 0x01 #define FLAG_FILTER 0x02 -#define FLAG_CHANNELGROUP_1 0x04 -#define FLAG_CHANNELGROUP_2 0x08 -#define FLAG_CHANNELGROUP_3 0x10 -#define FLAG_CHANNELGROUP_4 0x20 -#define FLAG_CLOCK_EXTERNAL 0x40 -#define FLAG_CLOCK_INVERTED 0x80 -#define FLAG_RLE 0x0100 - +#define FLAG_CHANNELGROUP_1 0x04 +#define FLAG_CHANNELGROUP_2 0x08 +#define FLAG_CHANNELGROUP_3 0x10 +#define FLAG_CHANNELGROUP_4 0x20 +#define FLAG_CLOCK_EXTERNAL 0x40 +#define FLAG_CLOCK_INVERTED 0x80 +#define FLAG_RLE 0x0100 static int capabilities[] = { HWCAP_LOGIC_ANALYZER, HWCAP_SAMPLERATE, HWCAP_CAPTURE_RATIO, HWCAP_LIMIT_SAMPLES, - 0 + 0, }; static struct samplerates samplerates = { 10, MHZ(200), 1, - 0 + 0, }; -/* list of struct serial_device_instance */ +/* List of struct serial_device_instance */ static GSList *device_instances = NULL; -/* current state of the flag register */ +/* Current state of the flag register */ static uint32_t flag_reg = 0; static uint64_t cur_samplerate = 0; static uint64_t limit_samples = 0; -/* pre/post trigger capture ratio, in percentage. 0 means no pre-trigger data. */ +/* + * Pre/post trigger capture ratio, in percentage. + * 0 means no pre-trigger data. + */ static int capture_ratio = 0; -static uint32_t probe_mask = 0xffffffff, trigger_mask[4] = {0}, trigger_value[4] = {0}; - - +static uint32_t probe_mask = 0xffffffff; +static uint32_t trigger_mask[4] = { 0, 0, 0, 0 }; +static uint32_t trigger_value[4] = { 0, 0, 0, 0 }; static int send_shortcommand(int fd, uint8_t command) { @@ -107,13 +114,12 @@ static int send_shortcommand(int fd, uint8_t command) g_message("ols: sending cmd 0x%.2x", command); buf[0] = command; - if(write(fd, buf, 1) != 1) + if (write(fd, buf, 1) != 1) return SIGROK_ERR; return SIGROK_OK; } - static int send_longcommand(int fd, uint8_t command, uint32_t data) { char buf[5]; @@ -124,7 +130,7 @@ static int send_longcommand(int fd, uint8_t command, uint32_t data) buf[2] = (data & 0xff0000) >> 16; buf[3] = (data & 0xff00) >> 8; buf[4] = data & 0xff; - if(write(fd, buf, 5) != 5) + if (write(fd, buf, 5) != 5) return SIGROK_ERR; return SIGROK_OK; @@ -138,32 +144,38 @@ static int configure_probes(GSList *probes) char *tc; probe_mask = 0; - for(i = 0; i < NUM_TRIGGER_STAGES; i++) { + for (i = 0; i < NUM_TRIGGER_STAGES; i++) { trigger_mask[i] = 0; trigger_value[i] = 0; } - for(l = probes; l; l = l->next) { - probe = (struct probe *) l->data; - if(!probe->enabled) + for (l = probes; l; l = l->next) { + probe = (struct probe *)l->data; + if (!probe->enabled) continue; - /* set up the probe mask for later configuration into the flag register */ + /* + * Set up the probe mask for later configuration into the + * flag register. + */ probe_bit = 1 << (probe->index - 1); probe_mask |= probe_bit; - if(probe->trigger) + if (probe->trigger) continue; - /* configure trigger mask and value */ + /* Configure trigger mask and value. */ stage = 0; - for(tc = probe->trigger; tc && *tc; tc++) { + for (tc = probe->trigger; tc && *tc; tc++) { trigger_mask[stage] |= probe_bit; - if(*tc == '1') + if (*tc == '1') trigger_value[stage] |= probe_bit; stage++; - if(stage > 3) - /* TODO: only supporting parallel mode, with up to 4 stages */ + if (stage > 3) + /* + * TODO: Only supporting parallel mode, with + * up to 4 stages. + */ return SIGROK_ERR; } } @@ -171,8 +183,7 @@ static int configure_probes(GSList *probes) return SIGROK_OK; } - -static void byteswap(uint32_t *in) +static void byteswap(uint32_t * in) { uint32_t out; @@ -181,10 +192,8 @@ static void byteswap(uint32_t *in) out |= (*in & 0xff0000) << 8; out |= (*in & 0xff000000) >> 8; *in = out; - } - static int hw_init(char *deviceinfo) { struct sigrok_device_instance *sdi; @@ -193,38 +202,49 @@ static int hw_init(char *deviceinfo) int devcnt, final_devcnt, num_ports, fd, ret, i; char buf[8], **device_names, **serial_params; - if(deviceinfo) + if (deviceinfo) ports = g_slist_append(NULL, strdup(deviceinfo)); else - /* no specific device given, so scan all serial ports */ + /* No specific device given, so scan all serial ports. */ ports = list_serial_ports(); num_ports = g_slist_length(ports); fds = calloc(1, num_ports * sizeof(GPollFD)); - device_names = malloc(num_ports * (sizeof(char *))); - serial_params = malloc(num_ports * (sizeof(char *))); + device_names = malloc(num_ports * sizeof(char *)); + serial_params = malloc(num_ports * sizeof(char *)); devcnt = 0; - for(l = ports; l; l = l->next) { - /* The discovery procedure is like this: first send the Reset command (0x00) 5 times, - * since the device could be anywhere in a 5-byte command. Then send the ID command - * (0x02). If the device responds with 4 bytes ("OLS1" or "SLA1"), we have a match. - * Since it may take the device a while to respond at 115Kb/s, we do all the sending - * first, then wait for all of them to respond with g_poll(). + for (l = ports; l; l = l->next) { + /* The discovery procedure is like this: first send the Reset + * command (0x00) 5 times, since the device could be anywhere + * in a 5-byte command. Then send the ID command (0x02). + * If the device responds with 4 bytes ("OLS1" or "SLA1"), we + * have a match. + * + * Since it may take the device a while to respond at 115Kb/s, + * we do all the sending first, then wait for all of them to + * respond with g_poll(). */ - g_message("probing %s...", (char *) l->data); + g_message("probing %s...", (char *)l->data); +#ifdef _WIN32 + // FIXME + // hdl = serial_open(l->data, 0); +#else fd = serial_open(l->data, O_RDWR | O_NONBLOCK); - if(fd != -1) { +#endif + if (fd != -1) { serial_params[devcnt] = serial_backup_params(fd); serial_set_params(fd, 115200, 8, 0, 1, 2); ret = SIGROK_OK; - for(i = 0; i < 5; i++) { - if( (ret = send_shortcommand(fd, CMD_RESET)) != SIGROK_OK) { - /* serial port is not writable */ + for (i = 0; i < 5; i++) { + if ((ret = send_shortcommand(fd, + CMD_RESET)) != SIGROK_OK) { + /* Serial port is not writable. */ break; } } - if(ret != SIGROK_OK) { - serial_restore_params(fd, serial_params[devcnt]); + if (ret != SIGROK_OK) { + serial_restore_params(fd, + serial_params[devcnt]); serial_close(fd); continue; } @@ -237,23 +257,30 @@ static int hw_init(char *deviceinfo) free(l->data); } - /* 2ms should do it, that's enough time for 28 bytes to go over the bus */ - usleep(2000); + /* 2ms isn't enough for reliable transfer with pl2303, let's try 10 */ + usleep(10000); final_devcnt = 0; g_poll(fds, devcnt, 1); - for(i = 0; i < devcnt; i++) { - if(fds[i].revents == G_IO_IN) { - if(read(fds[i].fd, buf, 4) == 4) { - if(!strncmp(buf, "1SLO", 4) || !strncmp(buf, "1ALS", 4)) { - if(!strncmp(buf, "1SLO", 4)) - sdi = sigrok_device_instance_new(final_devcnt, ST_INACTIVE, - "Openbench", "Logic Sniffer", "v1.0"); + for (i = 0; i < devcnt; i++) { + if (fds[i].revents == G_IO_IN) { + if (read(fds[i].fd, buf, 4) == 4) { + if (!strncmp(buf, "1SLO", 4) + || !strncmp(buf, "1ALS", 4)) { + if (!strncmp(buf, "1SLO", 4)) + sdi = sigrok_device_instance_new + (final_devcnt, ST_INACTIVE, + "Openbench", + "Logic Sniffer", "v1.0"); else - sdi = sigrok_device_instance_new(final_devcnt, ST_INACTIVE, - "Sump", "Logic Analyzer", "v1.0"); - sdi->serial = serial_device_instance_new(device_names[i], -1); - device_instances = g_slist_append(device_instances, sdi); + sdi = sigrok_device_instance_new + (final_devcnt, ST_INACTIVE, + "Sump", "Logic Analyzer", + "v1.0"); + sdi->serial = serial_device_instance_new + (device_names[i], -1); + device_instances = + g_slist_append(device_instances, sdi); final_devcnt++; serial_close(fds[i].fd); fds[i].fd = 0; @@ -262,7 +289,7 @@ static int hw_init(char *deviceinfo) free(device_names[i]); } - if(fds[i].fd != 0) { + if (fds[i].fd != 0) { serial_restore_params(fds[i].fd, serial_params[i]); serial_close(fds[i].fd); } @@ -279,16 +306,15 @@ static int hw_init(char *deviceinfo) return final_devcnt; } - static int hw_opendev(int device_index) { struct sigrok_device_instance *sdi; - if(!(sdi = get_sigrok_device_instance(device_instances, device_index))) + if (!(sdi = get_sigrok_device_instance(device_instances, device_index))) return SIGROK_ERR; sdi->serial->fd = serial_open(sdi->serial->port, O_RDWR); - if(sdi->serial->fd == -1) + if (sdi->serial->fd == -1) return SIGROK_ERR; sdi->status = ST_ACTIVE; @@ -296,52 +322,46 @@ static int hw_opendev(int device_index) return SIGROK_OK; } - static void hw_closedev(int device_index) { struct sigrok_device_instance *sdi; - if(!(sdi = get_sigrok_device_instance(device_instances, device_index))) + if (!(sdi = get_sigrok_device_instance(device_instances, device_index))) return; - if(sdi->serial->fd != -1) { + if (sdi->serial->fd != -1) { serial_close(sdi->serial->fd); sdi->serial->fd = -1; sdi->status = ST_INACTIVE; } - } - static void hw_cleanup(void) { GSList *l; struct sigrok_device_instance *sdi; - /* properly close all devices */ - for(l = device_instances; l; l = l->next) { + /* Properly close all devices. */ + for (l = device_instances; l; l = l->next) { sdi = l->data; - if(sdi->serial->fd != -1) + if (sdi->serial->fd != -1) serial_close(sdi->serial->fd); sigrok_device_instance_free(sdi); } g_slist_free(device_instances); device_instances = NULL; - } - static void *hw_get_device_info(int device_index, int device_info_id) { struct sigrok_device_instance *sdi; void *info; - if( !(sdi = get_sigrok_device_instance(device_instances, device_index)) ) + if (!(sdi = get_sigrok_device_instance(device_instances, device_index))) return NULL; info = NULL; - switch(device_info_id) - { + switch (device_info_id) { case DI_INSTANCE: info = sdi; break; @@ -352,7 +372,7 @@ static void *hw_get_device_info(int device_index, int device_info_id) info = &samplerates; break; case DI_TRIGGER_TYPES: - info = (char *) TRIGGER_TYPES; + info = (char *)TRIGGER_TYPES; break; case DI_CUR_SAMPLERATE: info = &cur_samplerate; @@ -362,172 +382,189 @@ static void *hw_get_device_info(int device_index, int device_info_id) return info; } - static int hw_get_status(int device_index) { struct sigrok_device_instance *sdi; - if(!(sdi = get_sigrok_device_instance(device_instances, device_index))) + if (!(sdi = get_sigrok_device_instance(device_instances, device_index))) return ST_NOT_FOUND; return sdi->status; } - static int *hw_get_capabilities(void) { - return capabilities; } - -static int set_configuration_samplerate(struct sigrok_device_instance *sdi, uint64_t samplerate) +static int set_configuration_samplerate(struct sigrok_device_instance *sdi, + uint64_t samplerate) { uint32_t divider; - if(samplerate < samplerates.low || samplerate > samplerates.high) + if (samplerate < samplerates.low || samplerate > samplerates.high) return SIGROK_ERR_SAMPLERATE; - if(samplerate > CLOCK_RATE) { + if (samplerate > CLOCK_RATE) { flag_reg |= FLAG_DEMUX; divider = (CLOCK_RATE * 2 / samplerate) - 1; - } - else { + } else { flag_reg &= ~FLAG_DEMUX; divider = (CLOCK_RATE / samplerate) - 1; } +#ifdef _WIN32 + // FIXME + // divider = htonl(divider); +#else divider = htonl(divider); +#endif - g_message("setting samplerate to %"PRIu64" Hz (divider %u, demux %s)", samplerate, divider, - flag_reg & FLAG_DEMUX ? "on" : "off"); - if(send_longcommand(sdi->serial->fd, CMD_SET_DIVIDER, divider) != SIGROK_OK) + g_message("setting samplerate to %" PRIu64 " Hz (divider %u, demux %s)", + samplerate, divider, flag_reg & FLAG_DEMUX ? "on" : "off"); + + if (send_longcommand(sdi->serial->fd, CMD_SET_DIVIDER, + divider) != SIGROK_OK) return SIGROK_ERR; cur_samplerate = samplerate; return SIGROK_OK; } - static int hw_set_configuration(int device_index, int capability, void *value) { struct sigrok_device_instance *sdi; int ret; uint64_t *tmp_u64; - if(!(sdi = get_sigrok_device_instance(device_instances, device_index))) + if (!(sdi = get_sigrok_device_instance(device_instances, device_index))) return SIGROK_ERR; - if(sdi->status != ST_ACTIVE) + if (sdi->status != ST_ACTIVE) return SIGROK_ERR; - if(capability == HWCAP_SAMPLERATE) { + if (capability == HWCAP_SAMPLERATE) { tmp_u64 = value; ret = set_configuration_samplerate(sdi, *tmp_u64); - } - else if(capability == HWCAP_PROBECONFIG) - ret = configure_probes( (GSList *) value); - else if(capability == HWCAP_LIMIT_SAMPLES) { - limit_samples = strtoull(value, NULL, 10); + } else if (capability == HWCAP_PROBECONFIG) { + ret = configure_probes((GSList *) value); + } else if (capability == HWCAP_LIMIT_SAMPLES) { + tmp_u64 = value; + limit_samples = *tmp_u64; ret = SIGROK_OK; - } - else if(capability == HWCAP_CAPTURE_RATIO) { + } else if (capability == HWCAP_CAPTURE_RATIO) { capture_ratio = strtol(value, NULL, 10); - if(capture_ratio < 0 || capture_ratio > 100) { + if (capture_ratio < 0 || capture_ratio > 100) { capture_ratio = 0; ret = SIGROK_ERR; - } - else + } else ret = SIGROK_OK; - } - else + } else { ret = SIGROK_ERR; + } return ret; } - static int receive_data(int fd, int revents, void *user_data) { static unsigned int num_transfers = 0; static int num_bytes = 0; - static char last_sample[4] = {0xff}; - static unsigned char sample[4] = {0}, tmp_sample[4]; + static char last_sample[4] = { 0xff, 0xff, 0xff, 0xff }; + static unsigned char sample[4] = { 0, 0, 0, 0 }; + static unsigned char tmp_sample[4]; int count, buflen, num_channels, i, j; struct datafeed_packet packet; unsigned char byte, *buffer; - if(num_transfers++ == 0) { - /* first time round, means the device started sending data, and will not - * stop until done. if it stops sending for longer than it takes to send - * a byte, that means it's finished. we'll double that to 30ms to be sure... + if (num_transfers++ == 0) { + /* + * First time round, means the device started sending data, + * and will not stop until done. If it stops sending for + * longer than it takes to send a byte, that means it's + * finished. We'll double that to 30ms to be sure... */ source_remove(fd); source_add(fd, G_IO_IN, 100, receive_data, user_data); } num_channels = 0; - for(i = 0x20; i > 0x02; i /= 2) - if((flag_reg & i) == 0) + for (i = 0x20; i > 0x02; i /= 2) { + if ((flag_reg & i) == 0) num_channels++; + } - if(revents == G_IO_IN && num_transfers / num_channels <= limit_samples) { - if(read(fd, &byte, 1) != 1) + if (revents == G_IO_IN + && num_transfers / num_channels <= limit_samples) { + if (read(fd, &byte, 1) != 1) return FALSE; sample[num_bytes++] = byte; - if(num_bytes == num_channels) { - /* got a full sample */ - if(flag_reg & FLAG_RLE) { - /* in RLE mode -1 should never come in as a sample, because - * bit 31 is the "count" flag */ - /* TODO: endianness may be wrong here, could be sample[3] */ - if(sample[0] & 0x80 && !(last_sample[0] & 0x80)) { - count = (int) (*sample) & 0x7fffffff; + if (num_bytes == num_channels) { + /* Got a full sample. */ + if (flag_reg & FLAG_RLE) { + /* + * In RLE mode -1 should never come in as a + * sample, because bit 31 is the "count" flag. + * TODO: Endianness may be wrong here, could be + * sample[3]. + */ + if (sample[0] & 0x80 + && !(last_sample[0] & 0x80)) { + count = (int)(*sample) & 0x7fffffff; buffer = g_malloc(count); buflen = 0; - for(i = 0; i < count; i++) - { - memcpy(buffer + buflen , last_sample, 4); + for (i = 0; i < count; i++) { + memcpy(buffer + buflen, + last_sample, 4); buflen += 4; } - } - else { - /* just a single sample, next sample will probably be a count - * referring to this -- but this one is still a part of the stream + } else { + /* + * Just a single sample, next sample + * will probably be a count referring + * to this -- but this one is still a + * part of the stream. */ buffer = sample; buflen = 4; } - } - else { - /* no compression */ + } else { + /* No compression. */ buffer = sample; buflen = 4; } - if(num_channels < 4) { - /* some channel groups may have been turned off, to speed up transfer - * between the hardware and the PC. expand that here before submitting - * it over the session bus -- whatever is listening on the bus will be - * expecting a full 32-bit sample, based on the number of probes. + if (num_channels < 4) { + /* + * Some channel groups may have been turned + * off, to speed up transfer between the + * hardware and the PC. Expand that here before + * submitting it over the session bus -- + * whatever is listening on the bus will be + * expecting a full 32-bit sample, based on + * the number of probes. */ j = 0; memset(tmp_sample, 0, 4); - for(i = 0; i < 4; i++) { - if((flag_reg & (8 >> i)) == 0) { - /* this channel group was enabled, copy from received sample */ + for (i = 0; i < 4; i++) { + if ((flag_reg & (8 >> i)) == 0) { + /* + * This channel group was + * enabled, copy from received + * sample. + */ tmp_sample[i] = sample[j++]; } } memcpy(sample, tmp_sample, 4); } - /* send it all to the session bus */ + /* Send it all to the session bus. */ packet.type = DF_LOGIC32; packet.length = buflen; packet.payload = buffer; session_bus(user_data, &packet); - if(buffer == sample) + if (buffer == sample) memcpy(last_sample, buffer, num_channels); else g_free(buffer); @@ -535,11 +572,15 @@ static int receive_data(int fd, int revents, void *user_data) memset(sample, 0, 4); num_bytes = 0; } - } - else { - /* this is the main loop telling us a timeout was reached, or we've - * acquired all the samples we asked for -- we're done */ + } else { + /* + * This is the main loop telling us a timeout was reached, or + * we've acquired all the samples we asked for -- we're done. + */ +#ifndef _WIN32 + /* TODO: Move to serial.c? */ tcflush(fd, TCIOFLUSH); +#endif serial_close(fd); packet.type = DF_END; packet.length = 0; @@ -549,69 +590,86 @@ static int receive_data(int fd, int revents, void *user_data) return TRUE; } - static int hw_start_acquisition(int device_index, gpointer session_device_id) { + int i; struct datafeed_packet *packet; struct datafeed_header *header; struct sigrok_device_instance *sdi; - int i; uint32_t data; uint16_t readcount, delaycount; uint8_t changrp_mask; - if(!(sdi = get_sigrok_device_instance(device_instances, device_index))) + if (!(sdi = get_sigrok_device_instance(device_instances, device_index))) return SIGROK_ERR; - if(sdi->status != ST_ACTIVE) + if (sdi->status != ST_ACTIVE) return SIGROK_ERR; - if(trigger_mask[0]) { - /* trigger masks */ - if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_MASK_0, trigger_mask[0]) != SIGROK_OK) + if (trigger_mask[0]) { + /* Trigger masks */ + if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_MASK_0, + trigger_mask[0]) != SIGROK_OK) return SIGROK_ERR; - if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_MASK_1, trigger_mask[1]) != SIGROK_OK) + if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_MASK_1, + trigger_mask[1]) != SIGROK_OK) return SIGROK_ERR; - if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_MASK_2, trigger_mask[2]) != SIGROK_OK) + if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_MASK_2, + trigger_mask[2]) != SIGROK_OK) return SIGROK_ERR; - if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_MASK_3, trigger_mask[3]) != SIGROK_OK) + if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_MASK_3, + trigger_mask[3]) != SIGROK_OK) return SIGROK_ERR; - if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_VALUE_0, trigger_value[0]) != SIGROK_OK) + if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_VALUE_0, + trigger_value[0]) != SIGROK_OK) return SIGROK_ERR; - if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_VALUE_1, trigger_value[1]) != SIGROK_OK) + if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_VALUE_1, + trigger_value[1]) != SIGROK_OK) return SIGROK_ERR; - if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_VALUE_2, trigger_value[2]) != SIGROK_OK) + if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_VALUE_2, + trigger_value[2]) != SIGROK_OK) return SIGROK_ERR; - if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_VALUE_3, trigger_value[3]) != SIGROK_OK) + if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_VALUE_3, + trigger_value[3]) != SIGROK_OK) return SIGROK_ERR; - /* trigger configuration */ - /* TODO: the start flag should only be on the last used stage I think... */ - if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_CONFIG_0, 0x00000008) != SIGROK_OK) + /* Trigger configuration */ + /* + * TODO: The start flag should only be on the last used + * stage I think... + */ + if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_CONFIG_0, + 0x00000008) != SIGROK_OK) return SIGROK_ERR; - if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_CONFIG_1, 0x00000000) != SIGROK_OK) + if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_CONFIG_1, + 0x00000000) != SIGROK_OK) return SIGROK_ERR; - if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_CONFIG_2, 0x00000000) != SIGROK_OK) + if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_CONFIG_2, + 0x00000000) != SIGROK_OK) return SIGROK_ERR; - if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_CONFIG_3, 0x00000000) != SIGROK_OK) + if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_CONFIG_3, + 0x00000000) != SIGROK_OK) return SIGROK_ERR; delaycount = limit_samples / 4 * (capture_ratio / 100); } else { - if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_MASK_0, trigger_mask[0]) != SIGROK_OK) + if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_MASK_0, + trigger_mask[0]) != SIGROK_OK) return SIGROK_ERR; - if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_VALUE_0, trigger_value[0]) != SIGROK_OK) + if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_VALUE_0, + trigger_value[0]) != SIGROK_OK) return SIGROK_ERR; - if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_CONFIG_0, 0x00000008) != SIGROK_OK) + if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_CONFIG_0, + 0x00000008) != SIGROK_OK) return SIGROK_ERR; delaycount = limit_samples / 4; } set_configuration_samplerate(sdi, cur_samplerate); - /* send sample limit and pre/post-trigger capture ratio */ + /* Send sample limit and pre/post-trigger capture ratio. */ readcount = limit_samples / 4; - if(flag_reg & FLAG_DEMUX) { + if (flag_reg & FLAG_DEMUX) { data = (delaycount - 8) & 0xfff8 << 13; data |= (readcount - 4) & 0xffff; } else { @@ -621,40 +679,43 @@ static int hw_start_acquisition(int device_index, gpointer session_device_id) } /* TODO: htonl()? */ byteswap(&data); - if(send_longcommand(sdi->serial->fd, CMD_CAPTURE_SIZE, data) != SIGROK_OK) + if (send_longcommand(sdi->serial->fd, CMD_CAPTURE_SIZE, + data) != SIGROK_OK) return SIGROK_ERR; - /* flag register */ - /* enable/disable channel groups in the flag register according to the - * probe mask. The register stores them backwards, hence shift right from 1000. + /* + * Enable/disable channel groups in the flag register according to the + * probe mask. The register stores them backwards, hence shift right + * from 1000. */ changrp_mask = 0; - for(i = 0; i < 4; i++) - { - if(probe_mask & (0xff << (i * 8))) + for (i = 0; i < 4; i++) { + if (probe_mask & (0xff << (i * 8))) changrp_mask |= (8 >> i); } - /* but the flag register wants them here, with 1 meaning "disable channel" */ + + /* The flag register wants them here, and 1 means "disable channel". */ flag_reg |= ~(changrp_mask << 2) & 0x3c; data = flag_reg << 24; - if(send_longcommand(sdi->serial->fd, CMD_SET_FLAGS, data) != SIGROK_OK) + if (send_longcommand(sdi->serial->fd, CMD_SET_FLAGS, data) != SIGROK_OK) return SIGROK_ERR; - /* start acquisition on the device */ - if(send_shortcommand(sdi->serial->fd, CMD_RUN) != SIGROK_OK) + /* Start acquisition on the device. */ + if (send_shortcommand(sdi->serial->fd, CMD_RUN) != SIGROK_OK) return SIGROK_ERR; - source_add(sdi->serial->fd, G_IO_IN, -1, receive_data, session_device_id); + source_add(sdi->serial->fd, G_IO_IN, -1, receive_data, + session_device_id); - /* send header packet to the session bus */ + /* Send header packet to the session bus. */ packet = g_malloc(sizeof(struct datafeed_packet)); header = g_malloc(sizeof(struct datafeed_header)); - if(!packet || !header) + if (!packet || !header) return SIGROK_ERR; packet->type = DF_HEADER; packet->length = sizeof(struct datafeed_header); - packet->payload = (unsigned char *) header; + packet->payload = (unsigned char *)header; header->feed_version = 1; gettimeofday(&header->starttime, NULL); header->samplerate = cur_samplerate; @@ -667,7 +728,6 @@ static int hw_start_acquisition(int device_index, gpointer session_device_id) return SIGROK_OK; } - static void hw_stop_acquisition(int device_index, gpointer session_device_id) { struct datafeed_packet packet; @@ -678,17 +738,13 @@ static void hw_stop_acquisition(int device_index, gpointer session_device_id) packet.type = DF_END; packet.length = 0; session_bus(session_device_id, &packet); - } - - struct device_plugin ols_plugin_info = { "sump", 1, hw_init, hw_cleanup, - hw_opendev, hw_closedev, hw_get_device_info, @@ -696,6 +752,5 @@ struct device_plugin ols_plugin_info = { hw_get_capabilities, hw_set_configuration, hw_start_acquisition, - hw_stop_acquisition + hw_stop_acquisition, }; -