X-Git-Url: https://sigrok.org/gitweb/?a=blobdiff_plain;f=hardware%2Fopenbench-logic-sniffer%2Fols.c;h=c1deb759e93a5d2bdecebe997187d57ff4ee1339;hb=d261dbbfcc73;hp=5742da195bccdf4c7d080b9d7796b811e9266d8d;hpb=926b866cb624cebf2efca098088dba11afa8ae96;p=libsigrok.git diff --git a/hardware/openbench-logic-sniffer/ols.c b/hardware/openbench-logic-sniffer/ols.c index 5742da19..c1deb759 100644 --- a/hardware/openbench-logic-sniffer/ols.c +++ b/hardware/openbench-logic-sniffer/ols.c @@ -1,7 +1,7 @@ /* * This file is part of the sigrok project. * - * Copyright (C) 2010 Bert Vermeulen + * Copyright (C) 2010-2012 Bert Vermeulen * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -24,7 +24,9 @@ #include #include #include -#ifndef _WIN32 +#ifdef _WIN32 +#include +#else #include #endif #include @@ -36,121 +38,115 @@ #include #endif #include -#include - -#define NUM_PROBES 32 -#define NUM_TRIGGER_STAGES 4 -#define TRIGGER_TYPES "01" -#define SERIAL_SPEED B115200 -/* TODO: SERIAL_ bits, parity, stop bit */ -#define CLOCK_RATE 100000000 - -/* Command opcodes */ -#define CMD_RESET 0x00 -#define CMD_ID 0x02 -#define CMD_SET_FLAGS 0x82 -#define CMD_SET_DIVIDER 0x80 -#define CMD_RUN 0x01 -#define CMD_CAPTURE_SIZE 0x81 -#define CMD_SET_TRIGGER_MASK_0 0xc0 -#define CMD_SET_TRIGGER_MASK_1 0xc4 -#define CMD_SET_TRIGGER_MASK_2 0xc8 -#define CMD_SET_TRIGGER_MASK_3 0xcc -#define CMD_SET_TRIGGER_VALUE_0 0xc1 -#define CMD_SET_TRIGGER_VALUE_1 0xc5 -#define CMD_SET_TRIGGER_VALUE_2 0xc9 -#define CMD_SET_TRIGGER_VALUE_3 0xcd -#define CMD_SET_TRIGGER_CONFIG_0 0xc2 -#define CMD_SET_TRIGGER_CONFIG_1 0xc6 -#define CMD_SET_TRIGGER_CONFIG_2 0xca -#define CMD_SET_TRIGGER_CONFIG_3 0xce - -/* Bitmasks for CMD_FLAGS */ -#define FLAG_DEMUX 0x01 -#define FLAG_FILTER 0x02 -#define FLAG_CHANNELGROUP_1 0x04 -#define FLAG_CHANNELGROUP_2 0x08 -#define FLAG_CHANNELGROUP_3 0x10 -#define FLAG_CHANNELGROUP_4 0x20 -#define FLAG_CLOCK_EXTERNAL 0x40 -#define FLAG_CLOCK_INVERTED 0x80 -#define FLAG_RLE 0x0100 - -static int capabilities[] = { - HWCAP_LOGIC_ANALYZER, - HWCAP_SAMPLERATE, - HWCAP_CAPTURE_RATIO, - HWCAP_LIMIT_SAMPLES, +#include "sigrok.h" +#include "sigrok-internal.h" +#include "ols.h" + +#ifdef _WIN32 +#define O_NONBLOCK FIONBIO +#endif + +static int hwcaps[] = { + SR_HWCAP_LOGIC_ANALYZER, + SR_HWCAP_SAMPLERATE, + SR_HWCAP_CAPTURE_RATIO, + SR_HWCAP_LIMIT_SAMPLES, + SR_HWCAP_RLE, 0, }; -static struct samplerates samplerates = { - 10, - MHZ(200), - 1, - 0, +/* Probes are numbered 0-31 (on the PCB silkscreen). */ +static const char *probe_names[NUM_PROBES + 1] = { + "0", + "1", + "2", + "3", + "4", + "5", + "6", + "7", + "8", + "9", + "10", + "11", + "12", + "13", + "14", + "15", + "16", + "17", + "18", + "19", + "20", + "21", + "22", + "23", + "24", + "25", + "26", + "27", + "28", + "29", + "30", + "31", + NULL, }; -/* List of struct serial_device_instance */ -static GSList *device_instances = NULL; +/* default supported samplerates, can be overridden by device metadata */ +static struct sr_samplerates samplerates = { + SR_HZ(10), + SR_MHZ(200), + SR_HZ(1), + NULL, +}; -/* Current state of the flag register */ -static uint32_t flag_reg = 0; - -static uint64_t cur_samplerate = 0; -static uint64_t limit_samples = 0; -/* - * Pre/post trigger capture ratio, in percentage. - * 0 means no pre-trigger data. - */ -static int capture_ratio = 0; -static uint32_t probe_mask = 0xffffffff; -static uint32_t trigger_mask[4] = { 0, 0, 0, 0 }; -static uint32_t trigger_value[4] = { 0, 0, 0, 0 }; +/* List of struct sr_serial_dev_inst */ +static GSList *dev_insts = NULL; static int send_shortcommand(int fd, uint8_t command) { char buf[1]; - g_message("ols: sending cmd 0x%.2x", command); + sr_dbg("ols: sending cmd 0x%.2x", command); buf[0] = command; - if (write(fd, buf, 1) != 1) - return SIGROK_ERR; + if (serial_write(fd, buf, 1) != 1) + return SR_ERR; - return SIGROK_OK; + return SR_OK; } static int send_longcommand(int fd, uint8_t command, uint32_t data) { char buf[5]; - g_message("ols: sending cmd 0x%.2x data 0x%.8x", command, data); + sr_dbg("ols: sending cmd 0x%.2x data 0x%.8x", command, data); buf[0] = command; buf[1] = (data & 0xff000000) >> 24; buf[2] = (data & 0xff0000) >> 16; buf[3] = (data & 0xff00) >> 8; buf[4] = data & 0xff; - if (write(fd, buf, 5) != 5) - return SIGROK_ERR; + if (serial_write(fd, buf, 5) != 5) + return SR_ERR; - return SIGROK_OK; + return SR_OK; } -static int configure_probes(GSList *probes) +static int configure_probes(struct context *ctx, GSList *probes) { - struct probe *probe; + struct sr_probe *probe; GSList *l; int probe_bit, stage, i; char *tc; - probe_mask = 0; + ctx->probe_mask = 0; for (i = 0; i < NUM_TRIGGER_STAGES; i++) { - trigger_mask[i] = 0; - trigger_value[i] = 0; + ctx->trigger_mask[i] = 0; + ctx->trigger_value[i] = 0; } + ctx->num_stages = 0; for (l = probes; l; l = l->next) { - probe = (struct probe *)l->data; + probe = (struct sr_probe *)l->data; if (!probe->enabled) continue; @@ -159,59 +155,233 @@ static int configure_probes(GSList *probes) * flag register. */ probe_bit = 1 << (probe->index - 1); - probe_mask |= probe_bit; + ctx->probe_mask |= probe_bit; - if (probe->trigger) + if (!probe->trigger) continue; /* Configure trigger mask and value. */ stage = 0; for (tc = probe->trigger; tc && *tc; tc++) { - trigger_mask[stage] |= probe_bit; + ctx->trigger_mask[stage] |= probe_bit; if (*tc == '1') - trigger_value[stage] |= probe_bit; + ctx->trigger_value[stage] |= probe_bit; stage++; if (stage > 3) /* * TODO: Only supporting parallel mode, with * up to 4 stages. */ - return SIGROK_ERR; + return SR_ERR; } + if (stage > ctx->num_stages) + ctx->num_stages = stage; } - return SIGROK_OK; + return SR_OK; } -static void byteswap(uint32_t * in) +static uint32_t reverse16(uint32_t in) { uint32_t out; - out = (*in & 0xff) << 8; - out |= (*in & 0xff00) >> 8; - out |= (*in & 0xff0000) << 8; - out |= (*in & 0xff000000) >> 8; - *in = out; + out = (in & 0xff) << 8; + out |= (in & 0xff00) >> 8; + out |= (in & 0xff0000) << 8; + out |= (in & 0xff000000) >> 8; + + return out; } -static int hw_init(char *deviceinfo) +static uint32_t reverse32(uint32_t in) { - struct sigrok_device_instance *sdi; + uint32_t out; + + out = (in & 0xff) << 24; + out |= (in & 0xff00) << 8; + out |= (in & 0xff0000) >> 8; + out |= (in & 0xff000000) >> 24; + + return out; +} + +static struct context *ols_dev_new(void) +{ + struct context *ctx; + + /* TODO: Is 'ctx' ever g_free()'d? */ + if (!(ctx = g_try_malloc0(sizeof(struct context)))) { + sr_err("ols: %s: ctx malloc failed", __func__); + return NULL; + } + + ctx->trigger_at = -1; + ctx->probe_mask = 0xffffffff; + ctx->cur_samplerate = SR_KHZ(200); + ctx->serial = NULL; + + return ctx; +} + +static struct sr_dev_inst *get_metadata(int fd) +{ + struct sr_dev_inst *sdi; + struct context *ctx; + uint32_t tmp_int; + uint8_t key, type, token; + GString *tmp_str, *devname, *version; + gchar tmp_c; + + sdi = sr_dev_inst_new(0, SR_ST_INACTIVE, NULL, NULL, NULL); + ctx = ols_dev_new(); + sdi->priv = ctx; + + devname = g_string_new(""); + version = g_string_new(""); + + key = 0xff; + while (key) { + if (serial_read(fd, &key, 1) != 1 || key == 0x00) + break; + type = key >> 5; + token = key & 0x1f; + switch (type) { + case 0: + /* NULL-terminated string */ + tmp_str = g_string_new(""); + while (serial_read(fd, &tmp_c, 1) == 1 && tmp_c != '\0') + g_string_append_c(tmp_str, tmp_c); + sr_dbg("ols: got metadata key 0x%.2x value '%s'", + key, tmp_str->str); + switch (token) { + case 0x01: + /* Device name */ + devname = g_string_append(devname, tmp_str->str); + break; + case 0x02: + /* FPGA firmware version */ + if (version->len) + g_string_append(version, ", "); + g_string_append(version, "FPGA version "); + g_string_append(version, tmp_str->str); + break; + case 0x03: + /* Ancillary version */ + if (version->len) + g_string_append(version, ", "); + g_string_append(version, "Ancillary version "); + g_string_append(version, tmp_str->str); + break; + default: + sr_info("ols: unknown token 0x%.2x: '%s'", + token, tmp_str->str); + break; + } + g_string_free(tmp_str, TRUE); + break; + case 1: + /* 32-bit unsigned integer */ + if (serial_read(fd, &tmp_int, 4) != 4) + break; + tmp_int = reverse32(tmp_int); + sr_dbg("ols: got metadata key 0x%.2x value 0x%.8x", + key, tmp_int); + switch (token) { + case 0x00: + /* Number of usable probes */ + ctx->num_probes = tmp_int; + break; + case 0x01: + /* Amount of sample memory available (bytes) */ + ctx->max_samples = tmp_int; + break; + case 0x02: + /* Amount of dynamic memory available (bytes) */ + /* what is this for? */ + break; + case 0x03: + /* Maximum sample rate (hz) */ + ctx->max_samplerate = tmp_int; + break; + case 0x04: + /* protocol version */ + ctx->protocol_version = tmp_int; + break; + default: + sr_info("ols: unknown token 0x%.2x: 0x%.8x", + token, tmp_int); + break; + } + break; + case 2: + /* 8-bit unsigned integer */ + if (serial_read(fd, &tmp_c, 1) != 1) + break; + sr_dbg("ols: got metadata key 0x%.2x value 0x%.2x", + key, tmp_c); + switch (token) { + case 0x00: + /* Number of usable probes */ + ctx->num_probes = tmp_c; + break; + case 0x01: + /* protocol version */ + ctx->protocol_version = tmp_c; + break; + default: + sr_info("ols: unknown token 0x%.2x: 0x%.2x", + token, tmp_c); + break; + } + break; + default: + /* unknown type */ + break; + } + } + + sdi->model = devname->str; + sdi->version = version->str; + g_string_free(devname, FALSE); + g_string_free(version, FALSE); + + return sdi; +} + +static int hw_init(const char *devinfo) +{ + struct sr_dev_inst *sdi; + struct context *ctx; GSList *ports, *l; - GPollFD *fds; + GPollFD *fds, probefd; int devcnt, final_devcnt, num_ports, fd, ret, i; - char buf[8], **device_names, **serial_params; + char buf[8], **dev_names, **serial_params; + + final_devcnt = 0; - if (deviceinfo) - ports = g_slist_append(NULL, strdup(deviceinfo)); + if (devinfo) + ports = g_slist_append(NULL, g_strdup(devinfo)); else /* No specific device given, so scan all serial ports. */ ports = list_serial_ports(); num_ports = g_slist_length(ports); - fds = calloc(1, num_ports * sizeof(GPollFD)); - device_names = malloc(num_ports * sizeof(char *)); - serial_params = malloc(num_ports * sizeof(char *)); + + if (!(fds = g_try_malloc0(num_ports * sizeof(GPollFD)))) { + sr_err("ols: %s: fds malloc failed", __func__); + goto hw_init_free_ports; /* TODO: SR_ERR_MALLOC. */ + } + + if (!(dev_names = g_try_malloc(num_ports * sizeof(char *)))) { + sr_err("ols: %s: dev_names malloc failed", __func__); + goto hw_init_free_fds; /* TODO: SR_ERR_MALLOC. */ + } + + if (!(serial_params = g_try_malloc(num_ports * sizeof(char *)))) { + sr_err("ols: %s: serial_params malloc failed", __func__); + goto hw_init_free_dev_names; /* TODO: SR_ERR_MALLOC. */ + } + devcnt = 0; for (l = ports; l; l = l->next) { /* The discovery procedure is like this: first send the Reset @@ -224,25 +394,20 @@ static int hw_init(char *deviceinfo) * we do all the sending first, then wait for all of them to * respond with g_poll(). */ - g_message("probing %s...", (char *)l->data); -#ifdef _WIN32 - // FIXME - // hdl = serial_open(l->data, 0); -#else + sr_info("ols: probing %s...", (char *)l->data); fd = serial_open(l->data, O_RDWR | O_NONBLOCK); -#endif if (fd != -1) { serial_params[devcnt] = serial_backup_params(fd); serial_set_params(fd, 115200, 8, 0, 1, 2); - ret = SIGROK_OK; + ret = SR_OK; for (i = 0; i < 5; i++) { if ((ret = send_shortcommand(fd, - CMD_RESET)) != SIGROK_OK) { + CMD_RESET)) != SR_OK) { /* Serial port is not writable. */ break; } } - if (ret != SIGROK_OK) { + if (ret != SR_OK) { serial_restore_params(fd, serial_params[devcnt]); serial_close(fd); @@ -251,286 +416,365 @@ static int hw_init(char *deviceinfo) send_shortcommand(fd, CMD_ID); fds[devcnt].fd = fd; fds[devcnt].events = G_IO_IN; - device_names[devcnt] = strdup(l->data); + dev_names[devcnt] = g_strdup(l->data); devcnt++; } - free(l->data); + g_free(l->data); } - /* 2ms should do (enough time for 28 bytes to go over the bus). */ - usleep(2000); + /* 2ms isn't enough for reliable transfer with pl2303, let's try 10 */ + usleep(10000); - final_devcnt = 0; g_poll(fds, devcnt, 1); + for (i = 0; i < devcnt; i++) { - if (fds[i].revents == G_IO_IN) { - if (read(fds[i].fd, buf, 4) == 4) { - if (!strncmp(buf, "1SLO", 4) - || !strncmp(buf, "1ALS", 4)) { - if (!strncmp(buf, "1SLO", 4)) - sdi = sigrok_device_instance_new - (final_devcnt, ST_INACTIVE, - "Openbench", - "Logic Sniffer", "v1.0"); - else - sdi = sigrok_device_instance_new - (final_devcnt, ST_INACTIVE, - "Sump", "Logic Analyzer", - "v1.0"); - sdi->serial = serial_device_instance_new - (device_names[i], -1); - device_instances = - g_slist_append(device_instances, sdi); - final_devcnt++; - serial_close(fds[i].fd); - fds[i].fd = 0; - } - } - free(device_names[i]); + if (fds[i].revents != G_IO_IN) + continue; + if (serial_read(fds[i].fd, buf, 4) != 4) + continue; + if (strncmp(buf, "1SLO", 4) && strncmp(buf, "1ALS", 4)) + continue; + + /* definitely using the OLS protocol, check if it supports + * the metadata command + */ + send_shortcommand(fds[i].fd, CMD_METADATA); + probefd.fd = fds[i].fd; + probefd.events = G_IO_IN; + if (g_poll(&probefd, 1, 10) > 0) { + /* got metadata */ + sdi = get_metadata(fds[i].fd); + sdi->index = final_devcnt; + } else { + /* not an OLS -- some other board that uses the sump protocol */ + sdi = sr_dev_inst_new(final_devcnt, SR_ST_INACTIVE, + "Sump", "Logic Analyzer", "v1.0"); + ctx = ols_dev_new(); + ctx->num_probes = 32; + sdi->priv = ctx; } + ctx->serial = sr_serial_dev_inst_new(dev_names[i], -1); + dev_insts = g_slist_append(dev_insts, sdi); + final_devcnt++; + serial_close(fds[i].fd); + fds[i].fd = 0; + } + /* clean up after all the probing */ + for (i = 0; i < devcnt; i++) { if (fds[i].fd != 0) { serial_restore_params(fds[i].fd, serial_params[i]); serial_close(fds[i].fd); } - free(serial_params[i]); + g_free(serial_params[i]); + g_free(dev_names[i]); } - free(fds); - free(device_names); - free(serial_params); + g_free(serial_params); +hw_init_free_dev_names: + g_free(dev_names); +hw_init_free_fds: + g_free(fds); +hw_init_free_ports: g_slist_free(ports); - cur_samplerate = samplerates.low; - return final_devcnt; } -static int hw_opendev(int device_index) +static int hw_dev_open(int dev_index) { - struct sigrok_device_instance *sdi; + struct sr_dev_inst *sdi; + struct context *ctx; + + if (!(sdi = sr_dev_inst_get(dev_insts, dev_index))) + return SR_ERR; - if (!(sdi = get_sigrok_device_instance(device_instances, device_index))) - return SIGROK_ERR; + ctx = sdi->priv; - sdi->serial->fd = serial_open(sdi->serial->port, O_RDWR); - if (sdi->serial->fd == -1) - return SIGROK_ERR; + ctx->serial->fd = serial_open(ctx->serial->port, O_RDWR); + if (ctx->serial->fd == -1) + return SR_ERR; - sdi->status = ST_ACTIVE; + sdi->status = SR_ST_ACTIVE; - return SIGROK_OK; + return SR_OK; } -static void hw_closedev(int device_index) +static int hw_dev_close(int dev_index) { - struct sigrok_device_instance *sdi; + struct sr_dev_inst *sdi; + struct context *ctx; - if (!(sdi = get_sigrok_device_instance(device_instances, device_index))) - return; + if (!(sdi = sr_dev_inst_get(dev_insts, dev_index))) { + sr_err("ols: %s: sdi was NULL", __func__); + return SR_ERR; /* TODO: SR_ERR_ARG? */ + } + + ctx = sdi->priv; - if (sdi->serial->fd != -1) { - serial_close(sdi->serial->fd); - sdi->serial->fd = -1; - sdi->status = ST_INACTIVE; + /* TODO */ + if (ctx->serial->fd != -1) { + serial_close(ctx->serial->fd); + ctx->serial->fd = -1; + sdi->status = SR_ST_INACTIVE; } + + return SR_OK; } -static void hw_cleanup(void) +static int hw_cleanup(void) { GSList *l; - struct sigrok_device_instance *sdi; - - /* Properly close all devices. */ - for (l = device_instances; l; l = l->next) { - sdi = l->data; - if (sdi->serial->fd != -1) - serial_close(sdi->serial->fd); - sigrok_device_instance_free(sdi); + struct sr_dev_inst *sdi; + struct context *ctx; + int ret = SR_OK; + + /* Properly close and free all devices. */ + for (l = dev_insts; l; l = l->next) { + if (!(sdi = l->data)) { + /* Log error, but continue cleaning up the rest. */ + sr_err("ols: %s: sdi was NULL, continuing", __func__); + ret = SR_ERR_BUG; + continue; + } + if (!(ctx = sdi->priv)) { + /* Log error, but continue cleaning up the rest. */ + sr_err("ols: %s: sdi->priv was NULL, continuing", + __func__); + ret = SR_ERR_BUG; + continue; + } + /* TODO: Check for serial != NULL. */ + if (ctx->serial->fd != -1) + serial_close(ctx->serial->fd); + sr_serial_dev_inst_free(ctx->serial); + sr_dev_inst_free(sdi); } - g_slist_free(device_instances); - device_instances = NULL; + g_slist_free(dev_insts); + dev_insts = NULL; + + return ret; } -static void *hw_get_device_info(int device_index, int device_info_id) +static void *hw_dev_info_get(int dev_index, int dev_info_id) { - struct sigrok_device_instance *sdi; + struct sr_dev_inst *sdi; + struct context *ctx; void *info; - if (!(sdi = get_sigrok_device_instance(device_instances, device_index))) + if (!(sdi = sr_dev_inst_get(dev_insts, dev_index))) return NULL; + ctx = sdi->priv; info = NULL; - switch (device_info_id) { - case DI_INSTANCE: + switch (dev_info_id) { + case SR_DI_INST: info = sdi; break; - case DI_NUM_PROBES: + case SR_DI_NUM_PROBES: info = GINT_TO_POINTER(NUM_PROBES); break; - case DI_SAMPLERATES: + case SR_DI_PROBE_NAMES: + info = probe_names; + break; + case SR_DI_SAMPLERATES: info = &samplerates; break; - case DI_TRIGGER_TYPES: + case SR_DI_TRIGGER_TYPES: info = (char *)TRIGGER_TYPES; break; - case DI_CUR_SAMPLERATE: - info = &cur_samplerate; + case SR_DI_CUR_SAMPLERATE: + info = &ctx->cur_samplerate; break; } return info; } -static int hw_get_status(int device_index) +static int hw_dev_status_get(int dev_index) { - struct sigrok_device_instance *sdi; + struct sr_dev_inst *sdi; - if (!(sdi = get_sigrok_device_instance(device_instances, device_index))) - return ST_NOT_FOUND; + if (!(sdi = sr_dev_inst_get(dev_insts, dev_index))) + return SR_ST_NOT_FOUND; return sdi->status; } -static int *hw_get_capabilities(void) +static int *hw_hwcap_get_all(void) { - return capabilities; + return hwcaps; } -static int set_configuration_samplerate(struct sigrok_device_instance *sdi, - uint64_t samplerate) +static int set_samplerate(struct sr_dev_inst *sdi, uint64_t samplerate) { - uint32_t divider; + struct context *ctx; - if (samplerate < samplerates.low || samplerate > samplerates.high) - return SIGROK_ERR_SAMPLERATE; + ctx = sdi->priv; + if (ctx->max_samplerate) { + if (samplerate > ctx->max_samplerate) + return SR_ERR_SAMPLERATE; + } else if (samplerate < samplerates.low || samplerate > samplerates.high) + return SR_ERR_SAMPLERATE; if (samplerate > CLOCK_RATE) { - flag_reg |= FLAG_DEMUX; - divider = (CLOCK_RATE * 2 / samplerate) - 1; + ctx->flag_reg |= FLAG_DEMUX; + ctx->cur_samplerate_divider = (CLOCK_RATE * 2 / samplerate) - 1; } else { - flag_reg &= ~FLAG_DEMUX; - divider = (CLOCK_RATE / samplerate) - 1; + ctx->flag_reg &= ~FLAG_DEMUX; + ctx->cur_samplerate_divider = (CLOCK_RATE / samplerate) - 1; } -#ifdef _WIN32 - // FIXME - // divider = htonl(divider); -#else - divider = htonl(divider); -#endif - - g_message("setting samplerate to %" PRIu64 " Hz (divider %u, demux %s)", - samplerate, divider, flag_reg & FLAG_DEMUX ? "on" : "off"); - - if (send_longcommand(sdi->serial->fd, CMD_SET_DIVIDER, - divider) != SIGROK_OK) - return SIGROK_ERR; - cur_samplerate = samplerate; - return SIGROK_OK; + /* Calculate actual samplerate used and complain if it is different + * from the requested. + */ + ctx->cur_samplerate = CLOCK_RATE / (ctx->cur_samplerate_divider + 1); + if (ctx->flag_reg & FLAG_DEMUX) + ctx->cur_samplerate *= 2; + if (ctx->cur_samplerate != samplerate) + sr_err("ols: can't match samplerate %" PRIu64 ", using %" + PRIu64, samplerate, ctx->cur_samplerate); + + return SR_OK; } -static int hw_set_configuration(int device_index, int capability, void *value) +static int hw_dev_config_set(int dev_index, int hwcap, void *value) { - struct sigrok_device_instance *sdi; + struct sr_dev_inst *sdi; + struct context *ctx; int ret; uint64_t *tmp_u64; - if (!(sdi = get_sigrok_device_instance(device_instances, device_index))) - return SIGROK_ERR; + if (!(sdi = sr_dev_inst_get(dev_insts, dev_index))) + return SR_ERR; + ctx = sdi->priv; - if (sdi->status != ST_ACTIVE) - return SIGROK_ERR; + if (sdi->status != SR_ST_ACTIVE) + return SR_ERR; - if (capability == HWCAP_SAMPLERATE) { + switch (hwcap) { + case SR_HWCAP_SAMPLERATE: + ret = set_samplerate(sdi, *(uint64_t *)value); + break; + case SR_HWCAP_PROBECONFIG: + ret = configure_probes(ctx, (GSList *)value); + break; + case SR_HWCAP_LIMIT_SAMPLES: tmp_u64 = value; - ret = set_configuration_samplerate(sdi, *tmp_u64); - } else if (capability == HWCAP_PROBECONFIG) { - ret = configure_probes((GSList *) value); - } else if (capability == HWCAP_LIMIT_SAMPLES) { - limit_samples = strtoull(value, NULL, 10); - ret = SIGROK_OK; - } else if (capability == HWCAP_CAPTURE_RATIO) { - capture_ratio = strtol(value, NULL, 10); - if (capture_ratio < 0 || capture_ratio > 100) { - capture_ratio = 0; - ret = SIGROK_ERR; + if (*tmp_u64 < MIN_NUM_SAMPLES) + return SR_ERR; + if (*tmp_u64 > ctx->max_samples) + sr_err("ols: sample limit exceeds hw max"); + ctx->limit_samples = *tmp_u64; + sr_info("ols: sample limit %" PRIu64, ctx->limit_samples); + ret = SR_OK; + break; + case SR_HWCAP_CAPTURE_RATIO: + ctx->capture_ratio = *(uint64_t *)value; + if (ctx->capture_ratio < 0 || ctx->capture_ratio > 100) { + ctx->capture_ratio = 0; + ret = SR_ERR; } else - ret = SIGROK_OK; - } else { - ret = SIGROK_ERR; + ret = SR_OK; + break; + case SR_HWCAP_RLE: + if (GPOINTER_TO_INT(value)) { + sr_info("ols: enabling RLE"); + ctx->flag_reg |= FLAG_RLE; + } + ret = SR_OK; + break; + default: + ret = SR_ERR; } return ret; } -static int receive_data(int fd, int revents, void *user_data) +static int receive_data(int fd, int revents, void *session_data) { - static unsigned int num_transfers = 0; - static int num_bytes = 0; - static char last_sample[4] = { 0xff, 0xff, 0xff, 0xff }; - static unsigned char sample[4] = { 0, 0, 0, 0 }; - static unsigned char tmp_sample[4]; - int count, buflen, num_channels, i, j; - struct datafeed_packet packet; - unsigned char byte, *buffer; - - if (num_transfers++ == 0) { + struct sr_datafeed_packet packet; + struct sr_datafeed_logic logic; + struct sr_dev_inst *sdi; + struct context *ctx; + GSList *l; + int num_channels, offset, i, j; + unsigned char byte; + + /* Find this device's ctx struct by its fd. */ + ctx = NULL; + for (l = dev_insts; l; l = l->next) { + sdi = l->data; + if (ctx->serial->fd == fd) { + ctx = sdi->priv; + break; + } + } + if (!ctx) + /* Shouldn't happen. */ + return TRUE; + + if (ctx->num_transfers++ == 0) { /* * First time round, means the device started sending data, * and will not stop until done. If it stops sending for * longer than it takes to send a byte, that means it's * finished. We'll double that to 30ms to be sure... */ - source_remove(fd); - source_add(fd, G_IO_IN, 100, receive_data, user_data); + sr_source_remove(fd); + sr_source_add(fd, G_IO_IN, 30, receive_data, session_data); + ctx->raw_sample_buf = g_try_malloc(ctx->limit_samples * 4); + if (!ctx->raw_sample_buf) { + sr_err("ols: %s: ctx->raw_sample_buf malloc failed", + __func__); + return FALSE; + } + /* fill with 1010... for debugging */ + memset(ctx->raw_sample_buf, 0x82, ctx->limit_samples * 4); } num_channels = 0; for (i = 0x20; i > 0x02; i /= 2) { - if ((flag_reg & i) == 0) + if ((ctx->flag_reg & i) == 0) num_channels++; } - if (revents == G_IO_IN - && num_transfers / num_channels <= limit_samples) { - if (read(fd, &byte, 1) != 1) + if (revents == G_IO_IN) { + if (serial_read(fd, &byte, 1) != 1) return FALSE; - sample[num_bytes++] = byte; - if (num_bytes == num_channels) { + /* Ignore it if we've read enough. */ + if (ctx->num_samples >= ctx->limit_samples) + return TRUE; + + ctx->sample[ctx->num_bytes++] = byte; + sr_dbg("ols: received byte 0x%.2x", byte); + if (ctx->num_bytes == num_channels) { /* Got a full sample. */ - if (flag_reg & FLAG_RLE) { + sr_dbg("ols: received sample 0x%.*x", + ctx->num_bytes * 2, *(int *)ctx->sample); + if (ctx->flag_reg & FLAG_RLE) { /* * In RLE mode -1 should never come in as a * sample, because bit 31 is the "count" flag. - * TODO: Endianness may be wrong here, could be - * sample[3]. */ - if (sample[0] & 0x80 - && !(last_sample[0] & 0x80)) { - count = (int)(*sample) & 0x7fffffff; - buffer = g_malloc(count); - buflen = 0; - for (i = 0; i < count; i++) { - memcpy(buffer + buflen, - last_sample, 4); - buflen += 4; - } - } else { + if (ctx->sample[ctx->num_bytes - 1] & 0x80) { + ctx->sample[ctx->num_bytes - 1] &= 0x7f; /* - * Just a single sample, next sample - * will probably be a count referring - * to this -- but this one is still a - * part of the stream. + * FIXME: This will only work on + * little-endian systems. */ - buffer = sample; - buflen = 4; + ctx->rle_count = *(int *)(ctx->sample); + sr_dbg("ols: RLE count = %d", ctx->rle_count); + ctx->num_bytes = 0; + return TRUE; } - } else { - /* No compression. */ - buffer = sample; - buflen = 4; + } + ctx->num_samples += ctx->rle_count + 1; + if (ctx->num_samples > ctx->limit_samples) { + /* Save us from overrunning the buffer. */ + ctx->rle_count -= ctx->num_samples - ctx->limit_samples; + ctx->num_samples = ctx->limit_samples; } if (num_channels < 4) { @@ -544,212 +788,266 @@ static int receive_data(int fd, int revents, void *user_data) * the number of probes. */ j = 0; - memset(tmp_sample, 0, 4); + memset(ctx->tmp_sample, 0, 4); for (i = 0; i < 4; i++) { - if ((flag_reg & (8 >> i)) == 0) { + if (((ctx->flag_reg >> 2) & (1 << i)) == 0) { /* * This channel group was * enabled, copy from received * sample. */ - tmp_sample[i] = sample[j++]; + ctx->tmp_sample[i] = ctx->sample[j++]; } } - memcpy(sample, tmp_sample, 4); + memcpy(ctx->sample, ctx->tmp_sample, 4); + sr_dbg("ols: full sample 0x%.8x", *(int *)ctx->sample); } - /* Send it all to the session bus. */ - packet.type = DF_LOGIC32; - packet.length = buflen; - packet.payload = buffer; - session_bus(user_data, &packet); - if (buffer == sample) - memcpy(last_sample, buffer, num_channels); - else - g_free(buffer); - - memset(sample, 0, 4); - num_bytes = 0; + /* the OLS sends its sample buffer backwards. + * store it in reverse order here, so we can dump + * this on the session bus later. + */ + offset = (ctx->limit_samples - ctx->num_samples) * 4; + for (i = 0; i <= ctx->rle_count; i++) { + memcpy(ctx->raw_sample_buf + offset + (i * 4), + ctx->sample, 4); + } + memset(ctx->sample, 0, 4); + ctx->num_bytes = 0; + ctx->rle_count = 0; } } else { /* * This is the main loop telling us a timeout was reached, or * we've acquired all the samples we asked for -- we're done. + * Send the (properly-ordered) buffer to the frontend. */ -#ifndef _WIN32 - /* TODO: Move to serial.c? */ - tcflush(fd, TCIOFLUSH); -#endif + if (ctx->trigger_at != -1) { + /* a trigger was set up, so we need to tell the frontend + * about it. + */ + if (ctx->trigger_at > 0) { + /* there are pre-trigger samples, send those first */ + packet.type = SR_DF_LOGIC; + packet.payload = &logic; + logic.length = ctx->trigger_at * 4; + logic.unitsize = 4; + logic.data = ctx->raw_sample_buf + + (ctx->limit_samples - ctx->num_samples) * 4; + sr_session_bus(session_data, &packet); + } + + /* send the trigger */ + packet.type = SR_DF_TRIGGER; + sr_session_bus(session_data, &packet); + + /* send post-trigger samples */ + packet.type = SR_DF_LOGIC; + packet.payload = &logic; + logic.length = (ctx->num_samples * 4) - (ctx->trigger_at * 4); + logic.unitsize = 4; + logic.data = ctx->raw_sample_buf + ctx->trigger_at * 4 + + (ctx->limit_samples - ctx->num_samples) * 4; + sr_session_bus(session_data, &packet); + } else { + /* no trigger was used */ + packet.type = SR_DF_LOGIC; + packet.payload = &logic; + logic.length = ctx->num_samples * 4; + logic.unitsize = 4; + logic.data = ctx->raw_sample_buf + + (ctx->limit_samples - ctx->num_samples) * 4; + sr_session_bus(session_data, &packet); + } + g_free(ctx->raw_sample_buf); + + serial_flush(fd); serial_close(fd); - packet.type = DF_END; - packet.length = 0; - session_bus(user_data, &packet); + packet.type = SR_DF_END; + sr_session_bus(session_data, &packet); } return TRUE; } -static int hw_start_acquisition(int device_index, gpointer session_device_id) +static int hw_dev_acquisition_start(int dev_index, gpointer session_data) { - int i; - struct datafeed_packet *packet; - struct datafeed_header *header; - struct sigrok_device_instance *sdi; + struct sr_datafeed_packet *packet; + struct sr_datafeed_header *header; + struct sr_dev_inst *sdi; + struct context *ctx; + uint32_t trigger_config[4]; uint32_t data; uint16_t readcount, delaycount; uint8_t changrp_mask; + int num_channels; + int i; - if (!(sdi = get_sigrok_device_instance(device_instances, device_index))) - return SIGROK_ERR; - - if (sdi->status != ST_ACTIVE) - return SIGROK_ERR; - - if (trigger_mask[0]) { - /* Trigger masks */ - if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_MASK_0, - trigger_mask[0]) != SIGROK_OK) - return SIGROK_ERR; - if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_MASK_1, - trigger_mask[1]) != SIGROK_OK) - return SIGROK_ERR; - if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_MASK_2, - trigger_mask[2]) != SIGROK_OK) - return SIGROK_ERR; - if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_MASK_3, - trigger_mask[3]) != SIGROK_OK) - return SIGROK_ERR; - - if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_VALUE_0, - trigger_value[0]) != SIGROK_OK) - return SIGROK_ERR; - if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_VALUE_1, - trigger_value[1]) != SIGROK_OK) - return SIGROK_ERR; - if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_VALUE_2, - trigger_value[2]) != SIGROK_OK) - return SIGROK_ERR; - if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_VALUE_3, - trigger_value[3]) != SIGROK_OK) - return SIGROK_ERR; - - /* Trigger configuration */ - /* - * TODO: The start flag should only be on the last used - * stage I think... - */ - if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_CONFIG_0, - 0x00000008) != SIGROK_OK) - return SIGROK_ERR; - if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_CONFIG_1, - 0x00000000) != SIGROK_OK) - return SIGROK_ERR; - if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_CONFIG_2, - 0x00000000) != SIGROK_OK) - return SIGROK_ERR; - if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_CONFIG_3, - 0x00000000) != SIGROK_OK) - return SIGROK_ERR; - delaycount = limit_samples / 4 * (capture_ratio / 100); - } else { - if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_MASK_0, - trigger_mask[0]) != SIGROK_OK) - return SIGROK_ERR; - if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_VALUE_0, - trigger_value[0]) != SIGROK_OK) - return SIGROK_ERR; - if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_CONFIG_0, - 0x00000008) != SIGROK_OK) - return SIGROK_ERR; - delaycount = limit_samples / 4; - } + if (!(sdi = sr_dev_inst_get(dev_insts, dev_index))) + return SR_ERR; - set_configuration_samplerate(sdi, cur_samplerate); + ctx = sdi->priv; - /* Send sample limit and pre/post-trigger capture ratio. */ - readcount = limit_samples / 4; - if (flag_reg & FLAG_DEMUX) { - data = (delaycount - 8) & 0xfff8 << 13; - data |= (readcount - 4) & 0xffff; - } else { - flag_reg |= FLAG_FILTER; - data = (readcount - 1) << 16; - data |= (delaycount - 1); - } - /* TODO: htonl()? */ - byteswap(&data); - if (send_longcommand(sdi->serial->fd, CMD_CAPTURE_SIZE, - data) != SIGROK_OK) - return SIGROK_ERR; + if (sdi->status != SR_ST_ACTIVE) + return SR_ERR; /* * Enable/disable channel groups in the flag register according to the - * probe mask. The register stores them backwards, hence shift right - * from 1000. + * probe mask. Calculate this here, because num_channels is needed + * to limit readcount. */ changrp_mask = 0; + num_channels = 0; for (i = 0; i < 4; i++) { - if (probe_mask & (0xff << (i * 8))) - changrp_mask |= (8 >> i); + if (ctx->probe_mask & (0xff << (i * 8))) { + changrp_mask |= (1 << i); + num_channels++; + } } - /* The flag register wants them here, and 1 means "disable channel". */ - flag_reg |= ~(changrp_mask << 2) & 0x3c; + /* + * Limit readcount to prevent reading past the end of the hardware + * buffer. + */ + readcount = MIN(ctx->max_samples / num_channels, ctx->limit_samples) / 4; + + memset(trigger_config, 0, 16); + trigger_config[ctx->num_stages - 1] |= 0x08; + if (ctx->trigger_mask[0]) { + delaycount = readcount * (1 - ctx->capture_ratio / 100.0); + ctx->trigger_at = (readcount - delaycount) * 4 - ctx->num_stages; + + if (send_longcommand(ctx->serial->fd, CMD_SET_TRIGGER_MASK_0, + reverse32(ctx->trigger_mask[0])) != SR_OK) + return SR_ERR; + if (send_longcommand(ctx->serial->fd, CMD_SET_TRIGGER_VALUE_0, + reverse32(ctx->trigger_value[0])) != SR_OK) + return SR_ERR; + if (send_longcommand(ctx->serial->fd, CMD_SET_TRIGGER_CONFIG_0, + trigger_config[0]) != SR_OK) + return SR_ERR; + + if (send_longcommand(ctx->serial->fd, CMD_SET_TRIGGER_MASK_1, + reverse32(ctx->trigger_mask[1])) != SR_OK) + return SR_ERR; + if (send_longcommand(ctx->serial->fd, CMD_SET_TRIGGER_VALUE_1, + reverse32(ctx->trigger_value[1])) != SR_OK) + return SR_ERR; + if (send_longcommand(ctx->serial->fd, CMD_SET_TRIGGER_CONFIG_1, + trigger_config[1]) != SR_OK) + return SR_ERR; + + if (send_longcommand(ctx->serial->fd, CMD_SET_TRIGGER_MASK_2, + reverse32(ctx->trigger_mask[2])) != SR_OK) + return SR_ERR; + if (send_longcommand(ctx->serial->fd, CMD_SET_TRIGGER_VALUE_2, + reverse32(ctx->trigger_value[2])) != SR_OK) + return SR_ERR; + if (send_longcommand(ctx->serial->fd, CMD_SET_TRIGGER_CONFIG_2, + trigger_config[2]) != SR_OK) + return SR_ERR; + + if (send_longcommand(ctx->serial->fd, CMD_SET_TRIGGER_MASK_3, + reverse32(ctx->trigger_mask[3])) != SR_OK) + return SR_ERR; + if (send_longcommand(ctx->serial->fd, CMD_SET_TRIGGER_VALUE_3, + reverse32(ctx->trigger_value[3])) != SR_OK) + return SR_ERR; + if (send_longcommand(ctx->serial->fd, CMD_SET_TRIGGER_CONFIG_3, + trigger_config[3]) != SR_OK) + return SR_ERR; + } else { + if (send_longcommand(ctx->serial->fd, CMD_SET_TRIGGER_MASK_0, + ctx->trigger_mask[0]) != SR_OK) + return SR_ERR; + if (send_longcommand(ctx->serial->fd, CMD_SET_TRIGGER_VALUE_0, + ctx->trigger_value[0]) != SR_OK) + return SR_ERR; + if (send_longcommand(ctx->serial->fd, CMD_SET_TRIGGER_CONFIG_0, + 0x00000008) != SR_OK) + return SR_ERR; + delaycount = readcount; + } + + sr_info("ols: setting samplerate to %" PRIu64 " Hz (divider %u, " + "demux %s)", ctx->cur_samplerate, ctx->cur_samplerate_divider, + ctx->flag_reg & FLAG_DEMUX ? "on" : "off"); + if (send_longcommand(ctx->serial->fd, CMD_SET_DIVIDER, + reverse32(ctx->cur_samplerate_divider)) != SR_OK) + return SR_ERR; + + /* Send sample limit and pre/post-trigger capture ratio. */ + data = ((readcount - 1) & 0xffff) << 16; + data |= (delaycount - 1) & 0xffff; + if (send_longcommand(ctx->serial->fd, CMD_CAPTURE_SIZE, reverse16(data)) != SR_OK) + return SR_ERR; - data = flag_reg << 24; - if (send_longcommand(sdi->serial->fd, CMD_SET_FLAGS, data) != SIGROK_OK) - return SIGROK_ERR; + /* The flag register wants them here, and 1 means "disable channel". */ + ctx->flag_reg |= ~(changrp_mask << 2) & 0x3c; + ctx->flag_reg |= FLAG_FILTER; + ctx->rle_count = 0; + data = (ctx->flag_reg << 24) | ((ctx->flag_reg << 8) & 0xff0000); + if (send_longcommand(ctx->serial->fd, CMD_SET_FLAGS, data) != SR_OK) + return SR_ERR; /* Start acquisition on the device. */ - if (send_shortcommand(sdi->serial->fd, CMD_RUN) != SIGROK_OK) - return SIGROK_ERR; + if (send_shortcommand(ctx->serial->fd, CMD_RUN) != SR_OK) + return SR_ERR; + + sr_source_add(ctx->serial->fd, G_IO_IN, -1, receive_data, + session_data); + + if (!(packet = g_try_malloc(sizeof(struct sr_datafeed_packet)))) { + sr_err("ols: %s: packet malloc failed", __func__); + return SR_ERR_MALLOC; + } - source_add(sdi->serial->fd, G_IO_IN, -1, receive_data, - session_device_id); + if (!(header = g_try_malloc(sizeof(struct sr_datafeed_header)))) { + sr_err("ols: %s: header malloc failed", __func__); + g_free(packet); + return SR_ERR_MALLOC; + } /* Send header packet to the session bus. */ - packet = g_malloc(sizeof(struct datafeed_packet)); - header = g_malloc(sizeof(struct datafeed_header)); - if (!packet || !header) - return SIGROK_ERR; - packet->type = DF_HEADER; - packet->length = sizeof(struct datafeed_header); + packet->type = SR_DF_HEADER; packet->payload = (unsigned char *)header; header->feed_version = 1; gettimeofday(&header->starttime, NULL); - header->samplerate = cur_samplerate; - header->protocol_id = PROTO_RAW; - header->num_probes = NUM_PROBES; - session_bus(session_device_id, packet); + header->samplerate = ctx->cur_samplerate; + header->num_logic_probes = NUM_PROBES; + sr_session_bus(session_data, packet); + g_free(header); g_free(packet); - return SIGROK_OK; + return SR_OK; } -static void hw_stop_acquisition(int device_index, gpointer session_device_id) +static int hw_dev_acquisition_stop(int dev_index, gpointer session_dev_id) { - struct datafeed_packet packet; + struct sr_datafeed_packet packet; + + /* Avoid compiler warnings. */ + (void)dev_index; - /* QUICK HACK */ - device_index = device_index; + packet.type = SR_DF_END; + sr_session_bus(session_dev_id, &packet); - packet.type = DF_END; - packet.length = 0; - session_bus(session_device_id, &packet); + return SR_OK; } -struct device_plugin ols_plugin_info = { - "sump", - 1, - hw_init, - hw_cleanup, - hw_opendev, - hw_closedev, - hw_get_device_info, - hw_get_status, - hw_get_capabilities, - hw_set_configuration, - hw_start_acquisition, - hw_stop_acquisition, +SR_PRIV struct sr_dev_plugin ols_plugin_info = { + .name = "ols", + .longname = "Openbench Logic Sniffer", + .api_version = 1, + .init = hw_init, + .cleanup = hw_cleanup, + .dev_open = hw_dev_open, + .dev_close = hw_dev_close, + .dev_info_get = hw_dev_info_get, + .dev_status_get = hw_dev_status_get, + .hwcap_get_all = hw_hwcap_get_all, + .dev_config_set = hw_dev_config_set, + .dev_acquisition_start = hw_dev_acquisition_start, + .dev_acquisition_stop = hw_dev_acquisition_stop, };