X-Git-Url: https://sigrok.org/gitweb/?a=blobdiff_plain;f=hardware%2Fopenbench-logic-sniffer%2Fols.c;h=7308d8b2063ae4701e0da19c197b98d77e541cc1;hb=baf1d71477ea5c1dea449bc9ce72b39d02751934;hp=3c844e613f4cbc660b91d57da68e905da65be9a8;hpb=4c100f3244ad816070fe2e30713705e109d5b4fb;p=libsigrok.git diff --git a/hardware/openbench-logic-sniffer/ols.c b/hardware/openbench-logic-sniffer/ols.c index 3c844e61..7308d8b2 100644 --- a/hardware/openbench-logic-sniffer/ols.c +++ b/hardware/openbench-logic-sniffer/ols.c @@ -24,614 +24,970 @@ #include #include #include +#ifdef _WIN32 +#include +#else #include +#endif #include #include #include +#ifdef _WIN32 +/* TODO */ +#else +#include +#endif #include -#include "sigrok.h" - -#define NUM_PROBES 32 -#define NUM_TRIGGER_STAGES 4 -#define TRIGGER_TYPES "01" -#define SERIAL_SPEED B115200 -/* TODO: SERIAL_ bits, parity, stop bit */ -#define CLOCK_RATE 100000000 - - -/* command opcodes */ -#define CMD_RESET 0x00 -#define CMD_ID 0x02 -#define CMD_SET_FLAGS 0x82 -#define CMD_SET_DIVIDER 0x80 -#define CMD_RUN 0x01 -#define CMD_CAPTURE_SIZE 0x81 -#define CMD_SET_TRIGGER_MASK_0 0xc0 -#define CMD_SET_TRIGGER_MASK_1 0xc4 -#define CMD_SET_TRIGGER_MASK_2 0xc8 -#define CMD_SET_TRIGGER_MASK_3 0xcc -#define CMD_SET_TRIGGER_VALUE_0 0xc1 -#define CMD_SET_TRIGGER_VALUE_1 0xc5 -#define CMD_SET_TRIGGER_VALUE_2 0xc9 -#define CMD_SET_TRIGGER_VALUE_3 0xcd -#define CMD_SET_TRIGGER_CONFIG_0 0xc2 -#define CMD_SET_TRIGGER_CONFIG_1 0xc6 -#define CMD_SET_TRIGGER_CONFIG_2 0xca -#define CMD_SET_TRIGGER_CONFIG_3 0xce - -/* bitmasks for CMD_FLAGS */ -#define FLAG_DEMUX 0x01 -#define FLAG_FILTER 0x02 -#define FLAG_CHANNELGROUP_1 0x04 -#define FLAG_CHANNELGROUP_2 0x08 -#define FLAG_CHANNELGROUP_3 0x10 -#define FLAG_CHANNELGROUP_4 0x20 -#define FLAG_CLOCK_EXTERNAL 0x40 -#define FLAG_CLOCK_INVERTED 0x80 -#define FLAG_RLE 0x0100 +#include +#include +#include "ols.h" +#ifdef _WIN32 +#define O_NONBLOCK FIONBIO +#endif static int capabilities[] = { - HWCAP_LOGIC_ANALYZER, - HWCAP_SAMPLERATE, - HWCAP_CAPTURE_RATIO, - HWCAP_LIMIT_SAMPLES, - 0 + SR_HWCAP_LOGIC_ANALYZER, + SR_HWCAP_SAMPLERATE, + SR_HWCAP_CAPTURE_RATIO, + SR_HWCAP_LIMIT_SAMPLES, + SR_HWCAP_RLE, + 0, }; -static struct samplerates samplerates = { - 1, - MHZ(200), - 1, - 0 +/* default supported samplerates, can be overridden by device metadata */ +static struct sr_samplerates samplerates = { + SR_HZ(10), + SR_MHZ(200), + SR_HZ(1), + NULL, }; -/* list of struct serial_device_instance */ +/* List of struct sr_serial_device_instance */ static GSList *device_instances = NULL; -/* current state of the flag register */ -uint32_t flag_reg = 0; - -static uint64_t cur_samplerate = 0; -static uint64_t limit_samples = 0; -/* pre/post trigger capture ratio, in percentage. 0 means no pre-trigger data. */ -int capture_ratio = 0; -static uint32_t probe_mask = 0, trigger_mask[4] = {0}, trigger_value[4] = {0}; - - - -int send_shortcommand(int fd, uint8_t command) +static int send_shortcommand(int fd, uint8_t command) { char buf[1]; - g_message("ols: sending cmd 0x%.2x", command); + sr_dbg("ols: sending cmd 0x%.2x", command); buf[0] = command; - if(write(fd, buf, 1) != 1) - return SIGROK_NOK; + if (serial_write(fd, buf, 1) != 1) + return SR_ERR; - return SIGROK_OK; + return SR_OK; } - -int send_longcommand(int fd, uint8_t command, uint32_t data) +static int send_longcommand(int fd, uint8_t command, uint32_t data) { char buf[5]; - g_message("ols: sending cmd 0x%.2x data 0x%.8x", command, data); + sr_dbg("ols: sending cmd 0x%.2x data 0x%.8x", command, data); buf[0] = command; - buf[1] = data & 0xff; - buf[2] = data & 0xff00 >> 8; - buf[3] = data & 0xff0000 >> 16; - buf[4] = data & 0xff000000 >> 24; - if(write(fd, buf, 5) != 5) - return SIGROK_NOK; - - return SIGROK_OK; + buf[1] = (data & 0xff000000) >> 24; + buf[2] = (data & 0xff0000) >> 16; + buf[3] = (data & 0xff00) >> 8; + buf[4] = data & 0xff; + if (serial_write(fd, buf, 5) != 5) + return SR_ERR; + + return SR_OK; } -static int configure_probes(GSList *probes) +static int configure_probes(struct ols_device *ols, GSList *probes) { - struct probe *probe; + struct sr_probe *probe; GSList *l; - int probe_bit, changrp_mask, stage, i; + int probe_bit, stage, i; char *tc; - probe_mask = 0; - for(i = 0; i < NUM_TRIGGER_STAGES; i++) - { - trigger_mask[i] = 0; - trigger_value[i] = 0; + ols->probe_mask = 0; + for (i = 0; i < NUM_TRIGGER_STAGES; i++) { + ols->trigger_mask[i] = 0; + ols->trigger_value[i] = 0; } - for(l = probes; l; l = l->next) - { - probe = (struct probe *) l->data; + ols->num_stages = 0; + for (l = probes; l; l = l->next) { + probe = (struct sr_probe *)l->data; + if (!probe->enabled) + continue; + + /* + * Set up the probe mask for later configuration into the + * flag register. + */ probe_bit = 1 << (probe->index - 1); - probe_mask |= probe_bit; - if(probe->trigger) - { - stage = 0; - for(tc = probe->trigger; *tc; tc++) - { - trigger_mask[stage] |= probe_bit; - if(*tc == '1') - trigger_value[stage] |= probe_bit; - stage++; - if(stage > 3) - { - /* only supporting parallel mode, with up to 4 stages */ - return SIGROK_NOK; - } - } + ols->probe_mask |= probe_bit; + + if (!probe->trigger) + continue; + + /* Configure trigger mask and value. */ + stage = 0; + for (tc = probe->trigger; tc && *tc; tc++) { + ols->trigger_mask[stage] |= probe_bit; + if (*tc == '1') + ols->trigger_value[stage] |= probe_bit; + stage++; + if (stage > 3) + /* + * TODO: Only supporting parallel mode, with + * up to 4 stages. + */ + return SR_ERR; } + if (stage > ols->num_stages) + ols->num_stages = stage; } - /* enable/disable channel groups in the flag register according - * to the probe mask we just made. The register stores them backwards, - * hence shift right from 1000. - */ - changrp_mask = 0; - for(i = 0; i < 4; i++) - { - if(probe_mask & (0xff << i)) - changrp_mask |= 8 >> i; + return SR_OK; +} + +static uint32_t reverse16(uint32_t in) +{ + uint32_t out; + + out = (in & 0xff) << 8; + out |= (in & 0xff00) >> 8; + out |= (in & 0xff0000) << 8; + out |= (in & 0xff000000) >> 8; + + return out; +} + +static uint32_t reverse32(uint32_t in) +{ + uint32_t out; + + out = (in & 0xff) << 24; + out |= (in & 0xff00) << 8; + out |= (in & 0xff0000) >> 8; + out |= (in & 0xff000000) >> 24; + + return out; +} + +static struct ols_device *ols_device_new(void) +{ + struct ols_device *ols; + + /* TODO: Is 'ols' ever g_free()'d? */ + if (!(ols = g_try_malloc0(sizeof(struct ols_device)))) { + sr_err("ols: %s: ols malloc failed", __func__); + return NULL; } - /* but the flag register wants them here */ - flag_reg |= changrp_mask << 2; - return SIGROK_OK; + ols->trigger_at = -1; + ols->probe_mask = 0xffffffff; + ols->cur_samplerate = SR_KHZ(200); + ols->period_ps = 5000000; + + return ols; } +static struct sr_device_instance *get_metadata(int fd) +{ + struct sr_device_instance *sdi; + struct ols_device *ols; + uint32_t tmp_int; + uint8_t key, type, token; + GString *tmp_str, *devicename, *version; + gchar tmp_c; + + sdi = sr_device_instance_new(0, SR_ST_INACTIVE, NULL, NULL, NULL); + ols = ols_device_new(); + sdi->priv = ols; + + devicename = g_string_new(""); + version = g_string_new(""); + + key = 0xff; + while (key) { + if (serial_read(fd, &key, 1) != 1 || key == 0x00) + break; + type = key >> 5; + token = key & 0x1f; + switch (type) { + case 0: + /* NULL-terminated string */ + tmp_str = g_string_new(""); + while (serial_read(fd, &tmp_c, 1) == 1 && tmp_c != '\0') + g_string_append_c(tmp_str, tmp_c); + sr_dbg("ols: got metadata key 0x%.2x value '%s'", + key, tmp_str->str); + switch (token) { + case 0x01: + /* Device name */ + devicename = g_string_append(devicename, tmp_str->str); + break; + case 0x02: + /* FPGA firmware version */ + if (version->len) + g_string_append(version, ", "); + g_string_append(version, "FPGA version "); + g_string_append(version, tmp_str->str); + break; + case 0x03: + /* Ancillary version */ + if (version->len) + g_string_append(version, ", "); + g_string_append(version, "Ancillary version "); + g_string_append(version, tmp_str->str); + break; + default: + sr_info("ols: unknown token 0x%.2x: '%s'", + token, tmp_str->str); + break; + } + g_string_free(tmp_str, TRUE); + break; + case 1: + /* 32-bit unsigned integer */ + if (serial_read(fd, &tmp_int, 4) != 4) + break; + tmp_int = reverse32(tmp_int); + sr_dbg("ols: got metadata key 0x%.2x value 0x%.8x", + key, tmp_int); + switch (token) { + case 0x00: + /* Number of usable probes */ + ols->num_probes = tmp_int; + break; + case 0x01: + /* Amount of sample memory available (bytes) */ + ols->max_samples = tmp_int; + break; + case 0x02: + /* Amount of dynamic memory available (bytes) */ + /* what is this for? */ + break; + case 0x03: + /* Maximum sample rate (hz) */ + ols->max_samplerate = tmp_int; + break; + case 0x04: + /* protocol version */ + ols->protocol_version = tmp_int; + break; + default: + sr_info("ols: unknown token 0x%.2x: 0x%.8x", + token, tmp_int); + break; + } + break; + case 2: + /* 8-bit unsigned integer */ + if (serial_read(fd, &tmp_c, 1) != 1) + break; + sr_dbg("ols: got metadata key 0x%.2x value 0x%.2x", + key, tmp_c); + switch (token) { + case 0x00: + /* Number of usable probes */ + ols->num_probes = tmp_c; + break; + case 0x01: + /* protocol version */ + ols->protocol_version = tmp_c; + break; + default: + sr_info("ols: unknown token 0x%.2x: 0x%.2x", + token, tmp_c); + break; + } + break; + default: + /* unknown type */ + break; + } + } + + sdi->model = devicename->str; + sdi->version = version->str; + g_string_free(devicename, FALSE); + g_string_free(version, FALSE); + + return sdi; +} -static int hw_init(char *deviceinfo) +static int hw_init(const char *deviceinfo) { - struct sigrok_device_instance *sdi; + struct sr_device_instance *sdi; + struct ols_device *ols; GSList *ports, *l; - GPollFD *fds; - struct termios term, *prev_termios; - int devcnt, final_devcnt, num_ports, fd, i; - char buf[8], **device_names; + GPollFD *fds, probefd; + int devcnt, final_devcnt, num_ports, fd, ret, i; + char buf[8], **device_names, **serial_params; - if(deviceinfo) - ports = g_slist_append(NULL, g_strdup(deviceinfo)); + final_devcnt = 0; + + if (deviceinfo) + ports = g_slist_append(NULL, strdup(deviceinfo)); else - /* no specific device given, so scan all serial ports */ + /* No specific device given, so scan all serial ports. */ ports = list_serial_ports(); num_ports = g_slist_length(ports); - fds = g_malloc0(num_ports * sizeof(GPollFD)); - device_names = g_malloc(num_ports * (sizeof(char *))); - prev_termios = g_malloc(num_ports * sizeof(struct termios)); + + if (!(fds = g_try_malloc0(num_ports * sizeof(GPollFD)))) { + sr_err("ols: %s: fds malloc failed", __func__); + goto hw_init_free_ports; /* TODO: SR_ERR_MALLOC. */ + } + + if (!(device_names = g_try_malloc(num_ports * sizeof(char *)))) { + sr_err("ols: %s: device_names malloc failed", __func__); + goto hw_init_free_fds; /* TODO: SR_ERR_MALLOC. */ + } + + if (!(serial_params = g_try_malloc(num_ports * sizeof(char *)))) { + sr_err("ols: %s: serial_params malloc failed", __func__); + goto hw_init_free_device_names; /* TODO: SR_ERR_MALLOC. */ + } + devcnt = 0; - for(l = ports; l; l = l->next) { - /* The discovery procedure is like this: first send the Reset command (0x00) 5 times, - * since the device could be anywhere in a 5-byte command. Then send the ID command - * (0x02). If the device responds with 4 bytes ("OLS1" or "SLA1"), we have a match. - * Since it may take the device a while to respond at 115Kb/s, we do all the sending - * first, then wait for all of them to respond with g_poll(). + for (l = ports; l; l = l->next) { + /* The discovery procedure is like this: first send the Reset + * command (0x00) 5 times, since the device could be anywhere + * in a 5-byte command. Then send the ID command (0x02). + * If the device responds with 4 bytes ("OLS1" or "SLA1"), we + * have a match. + * + * Since it may take the device a while to respond at 115Kb/s, + * we do all the sending first, then wait for all of them to + * respond with g_poll(). */ - fd = open(l->data, O_RDWR | O_NONBLOCK); - if(fd != -1) { - tcgetattr(fd, &prev_termios[devcnt]); - tcgetattr(fd, &term); - cfsetispeed(&term, SERIAL_SPEED); - tcsetattr(fd, TCSADRAIN, &term); - memset(buf, CMD_RESET, 5); - buf[5] = CMD_ID; - if(write(fd, buf, 6) == 6) { - fds[devcnt].fd = fd; - fds[devcnt].events = G_IO_IN; - device_names[devcnt] = l->data; - devcnt++; - g_message("probed device %s", (char *) l->data); + sr_info("ols: probing %s...", (char *)l->data); + fd = serial_open(l->data, O_RDWR | O_NONBLOCK); + if (fd != -1) { + serial_params[devcnt] = serial_backup_params(fd); + serial_set_params(fd, 115200, 8, 0, 1, 2); + ret = SR_OK; + for (i = 0; i < 5; i++) { + if ((ret = send_shortcommand(fd, + CMD_RESET)) != SR_OK) { + /* Serial port is not writable. */ + break; + } } - else { - /* restore port settings. of course, we've crapped all over the port. */ - tcsetattr(fd, TCSADRAIN, &prev_termios[devcnt]); - g_free(l->data); + if (ret != SR_OK) { + serial_restore_params(fd, + serial_params[devcnt]); + serial_close(fd); + continue; } + send_shortcommand(fd, CMD_ID); + fds[devcnt].fd = fd; + fds[devcnt].events = G_IO_IN; + device_names[devcnt] = strdup(l->data); + devcnt++; } + free(l->data); } - /* 2ms should do it, that's enough time for 28 bytes to go over the bus */ - usleep(2000); + /* 2ms isn't enough for reliable transfer with pl2303, let's try 10 */ + usleep(10000); - final_devcnt = 0; g_poll(fds, devcnt, 1); - for(i = 0; i < devcnt; i++) { - if(fds[i].revents == G_IO_IN) { - if(read(fds[i].fd, buf, 4) == 4) { - if(!strncmp(buf, "1SLO", 4) || !strncmp(buf, "1ALS", 4)) { - if(!strncmp(buf, "1SLO", 4)) - sdi = sigrok_device_instance_new(final_devcnt, ST_INACTIVE, - "Openbench", "Logic Sniffer", "v1.0"); - else - sdi = sigrok_device_instance_new(final_devcnt, ST_INACTIVE, - "Sump", "Logic Analyzer", "v1.0"); - sdi->serial = serial_device_instance_new(device_names[i], -1); - device_instances = g_slist_append(device_instances, sdi); - final_devcnt++; - fds[i].fd = 0; - } - } + + for (i = 0; i < devcnt; i++) { + if (fds[i].revents != G_IO_IN) + continue; + if (serial_read(fds[i].fd, buf, 4) != 4) + continue; + if (strncmp(buf, "1SLO", 4) && strncmp(buf, "1ALS", 4)) + continue; + + /* definitely using the OLS protocol, check if it supports + * the metadata command + */ + send_shortcommand(fds[i].fd, CMD_METADATA); + probefd.fd = fds[i].fd; + probefd.events = G_IO_IN; + if (g_poll(&probefd, 1, 10) > 0) { + /* got metadata */ + sdi = get_metadata(fds[i].fd); + sdi->index = final_devcnt; + } else { + /* not an OLS -- some other board that uses the sump protocol */ + sdi = sr_device_instance_new(final_devcnt, SR_ST_INACTIVE, + "Sump", "Logic Analyzer", "v1.0"); + ols = ols_device_new(); + ols->num_probes = 32; + sdi->priv = ols; } + sdi->serial = sr_serial_device_instance_new(device_names[i], -1); + device_instances = g_slist_append(device_instances, sdi); + final_devcnt++; + serial_close(fds[i].fd); + fds[i].fd = 0; + } - if(fds[i].fd != 0) - tcsetattr(fds[i].fd, TCSADRAIN, &prev_termios[i]); - close(fds[i].fd); + /* clean up after all the probing */ + for (i = 0; i < devcnt; i++) { + if (fds[i].fd != 0) { + serial_restore_params(fds[i].fd, serial_params[i]); + serial_close(fds[i].fd); + } + free(serial_params[i]); + free(device_names[i]); } - g_free(fds); + g_free(serial_params); +hw_init_free_device_names: g_free(device_names); - g_free(prev_termios); +hw_init_free_fds: + g_free(fds); +hw_init_free_ports: g_slist_free(ports); return final_devcnt; } - static int hw_opendev(int device_index) { - struct sigrok_device_instance *sdi; + struct sr_device_instance *sdi; - if(!(sdi = get_sigrok_device_instance(device_instances, device_index))) - return SIGROK_NOK; + if (!(sdi = sr_get_device_instance(device_instances, device_index))) + return SR_ERR; - sdi->serial->fd = open(sdi->serial->port, O_RDWR); - if(sdi->serial->fd == -1) - return SIGROK_NOK; + sdi->serial->fd = serial_open(sdi->serial->port, O_RDWR); + if (sdi->serial->fd == -1) + return SR_ERR; - sdi->status = ST_ACTIVE; + sdi->status = SR_ST_ACTIVE; - return SIGROK_OK; + return SR_OK; } - -static void hw_closedev(int device_index) +static int hw_closedev(int device_index) { - struct sigrok_device_instance *sdi; + struct sr_device_instance *sdi; - if(!(sdi = get_sigrok_device_instance(device_instances, device_index))) - return; + if (!(sdi = sr_get_device_instance(device_instances, device_index))) { + sr_err("ols: %s: sdi was NULL", __func__); + return SR_ERR; /* TODO: SR_ERR_ARG? */ + } - if(sdi->serial->fd != -1) { - close(sdi->serial->fd); + /* TODO */ + if (sdi->serial->fd != -1) { + serial_close(sdi->serial->fd); sdi->serial->fd = -1; - sdi->status = ST_INACTIVE; + sdi->status = SR_ST_INACTIVE; } + return SR_OK; } - static void hw_cleanup(void) { GSList *l; - struct sigrok_device_instance *sdi; + struct sr_device_instance *sdi; - /* properly close all devices */ - for(l = device_instances; l; l = l->next) { + /* Properly close and free all devices. */ + for (l = device_instances; l; l = l->next) { sdi = l->data; - if(sdi->serial->fd != -1) - close(sdi->serial->fd); - sigrok_device_instance_free(sdi); + if (sdi->serial->fd != -1) + serial_close(sdi->serial->fd); + sr_device_instance_free(sdi); } g_slist_free(device_instances); device_instances = NULL; - } - static void *hw_get_device_info(int device_index, int device_info_id) { - struct sigrok_device_instance *sdi; + struct sr_device_instance *sdi; + struct ols_device *ols; void *info; - if( !(sdi = get_sigrok_device_instance(device_instances, device_index)) ) + if (!(sdi = sr_get_device_instance(device_instances, device_index))) return NULL; + ols = sdi->priv; info = NULL; - switch(device_info_id) - { - case DI_INSTANCE: + switch (device_info_id) { + case SR_DI_INSTANCE: info = sdi; break; - case DI_NUM_PROBES: + case SR_DI_NUM_PROBES: info = GINT_TO_POINTER(NUM_PROBES); break; - case DI_SAMPLERATES: + case SR_DI_SAMPLERATES: info = &samplerates; break; - case DI_TRIGGER_TYPES: - info = (char *) TRIGGER_TYPES; + case SR_DI_TRIGGER_TYPES: + info = (char *)TRIGGER_TYPES; break; - case DI_CUR_SAMPLERATE: - info = &cur_samplerate; + case SR_DI_CUR_SAMPLERATE: + info = &ols->cur_samplerate; break; } return info; } - static int hw_get_status(int device_index) { - struct sigrok_device_instance *sdi; + struct sr_device_instance *sdi; - if(!(sdi = get_sigrok_device_instance(device_instances, device_index))) - return ST_NOT_FOUND; + if (!(sdi = sr_get_device_instance(device_instances, device_index))) + return SR_ST_NOT_FOUND; return sdi->status; } - static int *hw_get_capabilities(void) { - return capabilities; } - -static int set_configuration_samplerate(struct sigrok_device_instance *sdi, uint64_t samplerate) +static int set_configuration_samplerate(struct sr_device_instance *sdi, + uint64_t samplerate) { - uint32_t divider; - - if(samplerate < samplerates.low || samplerate > samplerates.high) - return SIGROK_ERR_BADVALUE; - - if(samplerate > CLOCK_RATE) { - flag_reg |= FLAG_DEMUX; - divider = (uint8_t) (CLOCK_RATE * 2 / samplerate) - 1; - } - else { - flag_reg &= FLAG_DEMUX; - divider = (uint8_t) (CLOCK_RATE / samplerate) - 1; + struct ols_device *ols; + + ols = sdi->priv; + if (ols->max_samplerate) { + if (samplerate > ols->max_samplerate) + return SR_ERR_SAMPLERATE; + } else if (samplerate < samplerates.low || samplerate > samplerates.high) + return SR_ERR_SAMPLERATE; + + ols->cur_samplerate = samplerate; + ols->period_ps = 1000000000000 / samplerate; + if (samplerate > CLOCK_RATE) { + ols->flag_reg |= FLAG_DEMUX; + ols->cur_samplerate_divider = (CLOCK_RATE * 2 / samplerate) - 1; + } else { + ols->flag_reg &= ~FLAG_DEMUX; + ols->cur_samplerate_divider = (CLOCK_RATE / samplerate) - 1; } - divider <<= 8; - g_message("setting samplerate to %"PRIu64" Hz (divider %u, demux %s)", samplerate, divider, - flag_reg & FLAG_DEMUX ? "on" : "off"); - if(send_longcommand(sdi->serial->fd, CMD_SET_DIVIDER, divider) != SIGROK_OK) - return SIGROK_NOK; - cur_samplerate = samplerate; - - return SIGROK_OK; + return SR_OK; } - static int hw_set_configuration(int device_index, int capability, void *value) { - struct sigrok_device_instance *sdi; + struct sr_device_instance *sdi; + struct ols_device *ols; int ret; uint64_t *tmp_u64; - if(!(sdi = get_sigrok_device_instance(device_instances, device_index))) - return SIGROK_NOK; + if (!(sdi = sr_get_device_instance(device_instances, device_index))) + return SR_ERR; + ols = sdi->priv; - if(sdi->status != ST_ACTIVE) - return SIGROK_NOK; + if (sdi->status != SR_ST_ACTIVE) + return SR_ERR; - if(capability == HWCAP_SAMPLERATE) { + switch (capability) { + case SR_HWCAP_SAMPLERATE: tmp_u64 = value; ret = set_configuration_samplerate(sdi, *tmp_u64); - } - else if(capability == HWCAP_PROBECONFIG) - ret = configure_probes( (GSList *) value); - else if(capability == HWCAP_LIMIT_SAMPLES) { - limit_samples = strtoull(value, NULL, 10); - ret = SIGROK_OK; - } - else if(capability == HWCAP_CAPTURE_RATIO) { - capture_ratio = strtol(value, NULL, 10); - if(capture_ratio < 0 || capture_ratio > 100) { - capture_ratio = 0; - ret = SIGROK_NOK; + break; + case SR_HWCAP_PROBECONFIG: + ret = configure_probes(ols, (GSList *) value); + break; + case SR_HWCAP_LIMIT_SAMPLES: + tmp_u64 = value; + if (*tmp_u64 < MIN_NUM_SAMPLES) + return SR_ERR; + if (*tmp_u64 > ols->max_samples) + sr_warn("ols: sample limit exceeds hw max"); + ols->limit_samples = *tmp_u64; + sr_info("ols: sample limit %" PRIu64, ols->limit_samples); + ret = SR_OK; + break; + case SR_HWCAP_CAPTURE_RATIO: + tmp_u64 = value; + ols->capture_ratio = *tmp_u64; + if (ols->capture_ratio < 0 || ols->capture_ratio > 100) { + ols->capture_ratio = 0; + ret = SR_ERR; + } else + ret = SR_OK; + break; + case SR_HWCAP_RLE: + if (!strcmp(value, "on")) { + sr_info("ols: enabling RLE"); + ols->flag_reg |= FLAG_RLE; } - else - ret = SIGROK_OK; + ret = SR_OK; + break; + default: + ret = SR_ERR; } - else - ret = SIGROK_NOK; return ret; } - -static int receive_data(int fd, int revents, void *user_data) +static int receive_data(int fd, int revents, void *session_data) { - static int num_transfers = 0; - static int num_bytes = 0; - static char last_sample[4] = {0xff}; - static unsigned char sample[4]; - int count, buflen, i; - struct datafeed_packet packet; - unsigned char byte, *buffer; - - if(num_transfers++ == 0) { - /* first time round, means the device started sending data, and will not - * stop until done. if it stops sending for longer than it takes to send - * a byte, that means it's finished. we'll double that to 30ms to be sure... + struct sr_datafeed_packet packet; + struct sr_datafeed_logic logic; + struct sr_device_instance *sdi; + struct ols_device *ols; + GSList *l; + int num_channels, offset, i, j; + unsigned char byte; + + /* find this device's ols_device struct by its fd */ + ols = NULL; + for (l = device_instances; l; l = l->next) { + sdi = l->data; + if (sdi->serial->fd == fd) { + ols = sdi->priv; + break; + } + } + if (!ols) + /* shouldn't happen */ + return TRUE; + + if (ols->num_transfers++ == 0) { + /* + * First time round, means the device started sending data, + * and will not stop until done. If it stops sending for + * longer than it takes to send a byte, that means it's + * finished. We'll double that to 30ms to be sure... */ - source_remove(fd); - source_add(fd, G_IO_IN, 30, receive_data, user_data); + sr_source_remove(fd); + sr_source_add(fd, G_IO_IN, 30, receive_data, session_data); + ols->raw_sample_buf = g_try_malloc(ols->limit_samples * 4); + if (!ols->raw_sample_buf) { + sr_err("ols: %s: ols->raw_sample_buf malloc failed", + __func__); + return FALSE; + } + /* fill with 1010... for debugging */ + memset(ols->raw_sample_buf, 0x82, ols->limit_samples * 4); + } + + num_channels = 0; + for (i = 0x20; i > 0x02; i /= 2) { + if ((ols->flag_reg & i) == 0) + num_channels++; } - /* TODO: / 4 depends on # of channels used */ - if(revents == G_IO_IN && num_transfers / 4 <= limit_samples){ - if(read(fd, &byte, 1) != 1) + if (revents == G_IO_IN) { + if (serial_read(fd, &byte, 1) != 1) return FALSE; - sample[num_bytes++] = byte; - if(num_bytes == 4) { - g_message("got sample 0x%.2x%.2x%.2x%.2x", sample[3], sample[2], sample[1], sample[0]); - /* got a full sample */ - if(flag_reg & FLAG_RLE) { - /* in RLE mode -1 should never come in as a sample, because - * bit 31 is the "count" flag */ - /* TODO: endianness may be wrong here, could be sample[3] */ - if(sample[0] & 0x80 && !(last_sample[0] & 0x80)) { - count = (int) (*sample) & 0x7fffffff; - buffer = g_malloc(count); - buflen = 0; - for(i = 0; i < count; i++) - { - memcpy(buffer + buflen , last_sample, 4); - buflen += 4; - } - } - else { - /* just a single sample, next sample will probably be a count - * referring to this -- but this one is still a part of the stream + /* Ignore it if we've read enough. */ + if (ols->num_samples >= ols->limit_samples) + return TRUE; + + ols->sample[ols->num_bytes++] = byte; + sr_dbg("ols: received byte 0x%.2x", byte); + if (ols->num_bytes == num_channels) { + /* Got a full sample. */ + sr_dbg("ols: received sample 0x%.*x", + ols->num_bytes * 2, *(int *)ols->sample); + if (ols->flag_reg & FLAG_RLE) { + /* + * In RLE mode -1 should never come in as a + * sample, because bit 31 is the "count" flag. + */ + if (ols->sample[ols->num_bytes - 1] & 0x80) { + ols->sample[ols->num_bytes - 1] &= 0x7f; + /* + * FIXME: This will only work on + * little-endian systems. */ - buffer = sample; - buflen = 4; + ols->rle_count = *(int *)(ols->sample); + sr_dbg("ols: RLE count = %d", ols->rle_count); + ols->num_bytes = 0; + return TRUE; + } + } + ols->num_samples += ols->rle_count + 1; + if (ols->num_samples > ols->limit_samples) { + /* Save us from overrunning the buffer. */ + ols->rle_count -= ols->num_samples - ols->limit_samples; + ols->num_samples = ols->limit_samples; + } + + if (num_channels < 4) { + /* + * Some channel groups may have been turned + * off, to speed up transfer between the + * hardware and the PC. Expand that here before + * submitting it over the session bus -- + * whatever is listening on the bus will be + * expecting a full 32-bit sample, based on + * the number of probes. + */ + j = 0; + memset(ols->tmp_sample, 0, 4); + for (i = 0; i < 4; i++) { + if (((ols->flag_reg >> 2) & (1 << i)) == 0) { + /* + * This channel group was + * enabled, copy from received + * sample. + */ + ols->tmp_sample[i] = ols->sample[j++]; + } } + memcpy(ols->sample, ols->tmp_sample, 4); + sr_dbg("ols: full sample 0x%.8x", *(int *)ols->sample); } - else { - /* no compression */ - buffer = sample; - buflen = 4; + + /* the OLS sends its sample buffer backwards. + * store it in reverse order here, so we can dump + * this on the session bus later. + */ + offset = (ols->limit_samples - ols->num_samples) * 4; + for (i = 0; i <= ols->rle_count; i++) { + memcpy(ols->raw_sample_buf + offset + (i * 4), + ols->sample, 4); + } + memset(ols->sample, 0, 4); + ols->num_bytes = 0; + ols->rle_count = 0; + } + } else { + /* + * This is the main loop telling us a timeout was reached, or + * we've acquired all the samples we asked for -- we're done. + * Send the (properly-ordered) buffer to the frontend. + */ + if (ols->trigger_at != -1) { + /* a trigger was set up, so we need to tell the frontend + * about it. + */ + if (ols->trigger_at > 0) { + /* there are pre-trigger samples, send those first */ + packet.type = SR_DF_LOGIC; + packet.timeoffset = 0; + packet.duration = ols->trigger_at * ols->period_ps; + packet.payload = &logic; + logic.length = ols->trigger_at * 4; + logic.unitsize = 4; + logic.data = ols->raw_sample_buf + + (ols->limit_samples - ols->num_samples) * 4; + sr_session_bus(session_data, &packet); } - /* send it all to the session bus */ - packet.type = DF_LOGIC32; - packet.length = buflen; - packet.payload = buffer; - session_bus(user_data, &packet); - if(buffer == sample) - memcpy(last_sample, buffer, 4); - else - g_free(buffer); - - num_bytes = 0; + /* send the trigger */ + packet.type = SR_DF_TRIGGER; + packet.timeoffset = ols->trigger_at * ols->period_ps; + packet.duration = 0; + sr_session_bus(session_data, &packet); + + /* send post-trigger samples */ + packet.type = SR_DF_LOGIC; + packet.timeoffset = ols->trigger_at * ols->period_ps; + packet.duration = (ols->num_samples - ols->trigger_at) * ols->period_ps; + packet.payload = &logic; + logic.length = (ols->num_samples * 4) - (ols->trigger_at * 4); + logic.unitsize = 4; + logic.data = ols->raw_sample_buf + ols->trigger_at * 4 + + (ols->limit_samples - ols->num_samples) * 4; + sr_session_bus(session_data, &packet); + } else { + /* no trigger was used */ + packet.type = SR_DF_LOGIC; + packet.timeoffset = 0; + packet.duration = ols->num_samples * ols->period_ps; + packet.payload = &logic; + logic.length = ols->num_samples * 4; + logic.unitsize = 4; + logic.data = ols->raw_sample_buf + + (ols->limit_samples - ols->num_samples) * 4; + sr_session_bus(session_data, &packet); } - } - else { - /* this is the main loop telling us a timeout was reached -- we're done */ - tcflush(fd, TCIOFLUSH); - close(fd); - packet.type = DF_END; - packet.length = 0; - session_bus(user_data, &packet); + g_free(ols->raw_sample_buf); + + serial_flush(fd); + serial_close(fd); + packet.type = SR_DF_END; + packet.timeoffset = ols->num_samples * ols->period_ps; + packet.duration = 0; + sr_session_bus(session_data, &packet); } return TRUE; } - -static int hw_start_acquisition(int device_index, gpointer session_device_id) +static int hw_start_acquisition(int device_index, gpointer session_data) { - struct datafeed_packet *packet; - struct datafeed_header *header; - struct sigrok_device_instance *sdi; + struct sr_datafeed_packet *packet; + struct sr_datafeed_header *header; + struct sr_device_instance *sdi; + struct ols_device *ols; + uint32_t trigger_config[4]; uint32_t data; + uint16_t readcount, delaycount; + uint8_t changrp_mask; + int num_channels; + int i; + + if (!(sdi = sr_get_device_instance(device_instances, device_index))) + return SR_ERR; + + ols = sdi->priv; - if(!(sdi = get_sigrok_device_instance(device_instances, device_index))) - return SIGROK_NOK; - - if(sdi->status != ST_ACTIVE) - return SIGROK_NOK; - - /* reset again */ - if(send_longcommand(sdi->serial->fd, CMD_RESET, 0) != SIGROK_OK) - return SIGROK_NOK; - - /* send flag register */ - data = flag_reg << 24; - if(send_longcommand(sdi->serial->fd, CMD_SET_FLAGS, data) != SIGROK_OK) - return SIGROK_NOK; - - /* send sample limit and pre/post-trigger capture ratio */ - data = limit_samples / 4 << 16; - if(capture_ratio) - data |= (limit_samples - (limit_samples / 100 * capture_ratio)) / 4; - data = 0x00190019; - if(send_longcommand(sdi->serial->fd, CMD_CAPTURE_SIZE, data) != SIGROK_OK) - return SIGROK_NOK; - - /* trigger masks */ - if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_MASK_0, trigger_mask[0]) != SIGROK_OK) - return SIGROK_NOK; -// if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_MASK_1, trigger_mask[1]) != SIGROK_OK) -// return SIGROK_NOK; -// if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_MASK_2, trigger_mask[2]) != SIGROK_OK) -// return SIGROK_NOK; -// if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_MASK_3, trigger_mask[3]) != SIGROK_OK) -// return SIGROK_NOK; - - if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_VALUE_0, trigger_value[0]) != SIGROK_OK) - return SIGROK_NOK; -// if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_VALUE_1, trigger_value[1]) != SIGROK_OK) -// return SIGROK_NOK; -// if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_VALUE_2, trigger_value[2]) != SIGROK_OK) -// return SIGROK_NOK; -// if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_VALUE_3, trigger_value[3]) != SIGROK_OK) -// return SIGROK_NOK; - - /* trigger configuration */ - /* TODO: the start flag should only be on the last used stage I think... */ - if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_CONFIG_0, 0x00000008) != SIGROK_OK) - return SIGROK_NOK; -// if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_CONFIG_1, 0x00000000) != SIGROK_OK) -// return SIGROK_NOK; -// if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_CONFIG_2, 0x00000000) != SIGROK_OK) -// return SIGROK_NOK; -// if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_CONFIG_3, 0x00000000) != SIGROK_OK) -// return SIGROK_NOK; - - set_configuration_samplerate(sdi, cur_samplerate); - - /* start acquisition on the device */ - if(send_shortcommand(sdi->serial->fd, CMD_RUN) != SIGROK_OK) - return SIGROK_NOK; - - source_add(sdi->serial->fd, G_IO_IN, -1, receive_data, session_device_id); - - /* send header packet to the session bus */ - packet = g_malloc(sizeof(struct datafeed_packet)); - header = g_malloc(sizeof(struct datafeed_header)); - if(!packet || !header) - return SIGROK_NOK; - packet->type = DF_HEADER; - packet->length = sizeof(struct datafeed_header); - packet->payload = (unsigned char *) header; + if (sdi->status != SR_ST_ACTIVE) + return SR_ERR; + + /* + * Enable/disable channel groups in the flag register according to the + * probe mask. Calculate this here, because num_channels is needed + * to limit readcount. + */ + changrp_mask = 0; + num_channels = 0; + for (i = 0; i < 4; i++) { + if (ols->probe_mask & (0xff << (i * 8))) { + changrp_mask |= (1 << i); + num_channels++; + } + } + + /* + * Limit readcount to prevent reading past the end of the hardware + * buffer. + */ + readcount = MIN(ols->max_samples / num_channels, ols->limit_samples) / 4; + + memset(trigger_config, 0, 16); + trigger_config[ols->num_stages - 1] |= 0x08; + if (ols->trigger_mask[0]) { + delaycount = readcount * (1 - ols->capture_ratio / 100.0); + ols->trigger_at = (readcount - delaycount) * 4 - ols->num_stages; + + if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_MASK_0, + reverse32(ols->trigger_mask[0])) != SR_OK) + return SR_ERR; + if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_VALUE_0, + reverse32(ols->trigger_value[0])) != SR_OK) + return SR_ERR; + if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_CONFIG_0, + trigger_config[0]) != SR_OK) + return SR_ERR; + + if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_MASK_1, + reverse32(ols->trigger_mask[1])) != SR_OK) + return SR_ERR; + if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_VALUE_1, + reverse32(ols->trigger_value[1])) != SR_OK) + return SR_ERR; + if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_CONFIG_1, + trigger_config[1]) != SR_OK) + return SR_ERR; + + if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_MASK_2, + reverse32(ols->trigger_mask[2])) != SR_OK) + return SR_ERR; + if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_VALUE_2, + reverse32(ols->trigger_value[2])) != SR_OK) + return SR_ERR; + if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_CONFIG_2, + trigger_config[2]) != SR_OK) + return SR_ERR; + + if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_MASK_3, + reverse32(ols->trigger_mask[3])) != SR_OK) + return SR_ERR; + if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_VALUE_3, + reverse32(ols->trigger_value[3])) != SR_OK) + return SR_ERR; + if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_CONFIG_3, + trigger_config[3]) != SR_OK) + return SR_ERR; + } else { + if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_MASK_0, + ols->trigger_mask[0]) != SR_OK) + return SR_ERR; + if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_VALUE_0, + ols->trigger_value[0]) != SR_OK) + return SR_ERR; + if (send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_CONFIG_0, + 0x00000008) != SR_OK) + return SR_ERR; + delaycount = readcount; + } + + sr_info("ols: setting samplerate to %" PRIu64 " Hz (divider %u, " + "demux %s)", ols->cur_samplerate, ols->cur_samplerate_divider, + ols->flag_reg & FLAG_DEMUX ? "on" : "off"); + if (send_longcommand(sdi->serial->fd, CMD_SET_DIVIDER, + reverse32(ols->cur_samplerate_divider)) != SR_OK) + return SR_ERR; + + /* Send sample limit and pre/post-trigger capture ratio. */ + data = ((readcount - 1) & 0xffff) << 16; + data |= (delaycount - 1) & 0xffff; + if (send_longcommand(sdi->serial->fd, CMD_CAPTURE_SIZE, reverse16(data)) != SR_OK) + return SR_ERR; + + /* The flag register wants them here, and 1 means "disable channel". */ + ols->flag_reg |= ~(changrp_mask << 2) & 0x3c; + ols->flag_reg |= FLAG_FILTER; + ols->rle_count = 0; + data = (ols->flag_reg << 24) | ((ols->flag_reg << 8) & 0xff0000); + if (send_longcommand(sdi->serial->fd, CMD_SET_FLAGS, data) != SR_OK) + return SR_ERR; + + /* Start acquisition on the device. */ + if (send_shortcommand(sdi->serial->fd, CMD_RUN) != SR_OK) + return SR_ERR; + + sr_source_add(sdi->serial->fd, G_IO_IN, -1, receive_data, + session_data); + + if (!(packet = g_try_malloc(sizeof(struct sr_datafeed_packet)))) { + sr_err("ols: %s: packet malloc failed", __func__); + return SR_ERR_MALLOC; + } + + if (!(header = g_try_malloc(sizeof(struct sr_datafeed_header)))) { + sr_err("ols: %s: header malloc failed", __func__); + g_free(packet); + return SR_ERR_MALLOC; + } + + /* Send header packet to the session bus. */ + packet->type = SR_DF_HEADER; + packet->payload = (unsigned char *)header; header->feed_version = 1; gettimeofday(&header->starttime, NULL); - header->samplerate = cur_samplerate; - header->protocol_id = PROTO_RAW; - header->num_probes = NUM_PROBES; - session_bus(session_device_id, packet); + header->samplerate = ols->cur_samplerate; + header->num_logic_probes = NUM_PROBES; + header->num_analog_probes = 0; + sr_session_bus(session_data, packet); + g_free(header); g_free(packet); - return SIGROK_OK; + return SR_OK; } - static void hw_stop_acquisition(int device_index, gpointer session_device_id) { - struct datafeed_packet packet; + struct sr_datafeed_packet packet; - packet.type = DF_END; - packet.length = 0; - session_bus(session_device_id, &packet); + /* Avoid compiler warnings. */ + device_index = device_index; + packet.type = SR_DF_END; + sr_session_bus(session_device_id, &packet); } - - -struct device_plugin ols_plugin_info = { - "sump", - 1, - hw_init, - hw_cleanup, - - hw_opendev, - hw_closedev, - hw_get_device_info, - hw_get_status, - hw_get_capabilities, - hw_set_configuration, - hw_start_acquisition, - hw_stop_acquisition +struct sr_device_plugin ols_plugin_info = { + .name = "ols", + .longname = "Openbench Logic Sniffer", + .api_version = 1, + .init = hw_init, + .cleanup = hw_cleanup, + .opendev = hw_opendev, + .closedev = hw_closedev, + .get_device_info = hw_get_device_info, + .get_status = hw_get_status, + .get_capabilities = hw_get_capabilities, + .set_configuration = hw_set_configuration, + .start_acquisition = hw_start_acquisition, + .stop_acquisition = hw_stop_acquisition, }; -