X-Git-Url: https://sigrok.org/gitweb/?a=blobdiff_plain;f=hardware%2Fopenbench-logic-sniffer%2Fapi.c;h=b99d8e72125545258214a1513389482ef5fa116c;hb=f41a4cae4966fb0237211d163a7afc581e29cbd7;hp=7852b6ce3ee473b43bcbb1e9f6b39ca0f2404ad8;hpb=32f09bfd9e2eaa6b909a672f779b74c53838120e;p=libsigrok.git

diff --git a/hardware/openbench-logic-sniffer/api.c b/hardware/openbench-logic-sniffer/api.c
index 7852b6ce..b99d8e72 100644
--- a/hardware/openbench-logic-sniffer/api.c
+++ b/hardware/openbench-logic-sniffer/api.c
@@ -61,8 +61,8 @@ static const char *patterns[] = {
 	STR_PATTERN_INTERNAL,
 };
 
-/* Probes are numbered 0-31 (on the PCB silkscreen). */
-SR_PRIV const char *ols_probe_names[NUM_PROBES + 1] = {
+/* Channels are numbered 0-31 (on the PCB silkscreen). */
+SR_PRIV const char *ols_channel_names[NUM_CHANNELS + 1] = {
 	"0", "1", "2", "3", "4", "5", "6", "7", "8", "9", "10", "11", "12",
 	"13", "14", "15", "16", "17", "18", "19", "20", "21", "22", "23",
 	"24", "25", "26", "27", "28", "29", "30", "31",
@@ -79,11 +79,6 @@ static const uint64_t samplerates[] = {
 SR_PRIV struct sr_dev_driver ols_driver_info;
 static struct sr_dev_driver *di = &ols_driver_info;
 
-static int dev_clear(void)
-{
-	return std_dev_clear(di, NULL);
-}
-
 static int init(struct sr_context *sr_ctx)
 {
 	return std_init(sr_ctx, di, LOG_PREFIX);
@@ -95,7 +90,7 @@ static GSList *scan(GSList *options)
 	struct sr_dev_inst *sdi;
 	struct drv_context *drvc;
 	struct dev_context *devc;
-	struct sr_probe *probe;
+	struct sr_channel *ch;
 	struct sr_serial_dev_inst *serial;
 	GPollFD probefd;
 	GSList *l, *devices;
@@ -182,10 +177,10 @@ static GSList *scan(GSList *options)
 				"Sump", "Logic Analyzer", "v1.0");
 		sdi->driver = di;
 		for (i = 0; i < 32; i++) {
-			if (!(probe = sr_probe_new(i, SR_PROBE_LOGIC, TRUE,
-					ols_probe_names[i])))
+			if (!(ch = sr_channel_new(i, SR_CHANNEL_LOGIC, TRUE,
+					ols_channel_names[i])))
 				return 0;
-			sdi->probes = g_slist_append(sdi->probes, probe);
+			sdi->channels = g_slist_append(sdi->channels, ch);
 		}
 		devc = ols_dev_new();
 		sdi->priv = devc;
@@ -195,7 +190,7 @@ static GSList *scan(GSList *options)
 		sr_dbg("Failed to set default samplerate (%"PRIu64").",
 				DEFAULT_SAMPLERATE);
 	/* Clear trigger masks, values and stages. */
-	ols_configure_probes(sdi);
+	ols_configure_channels(sdi);
 	sdi->inst_type = SR_INST_SERIAL;
 	sdi->conn = serial;
 
@@ -214,15 +209,15 @@ static GSList *dev_list(void)
 
 static int cleanup(void)
 {
-	return dev_clear();
+	return std_dev_clear(di, NULL);
 }
 
 static int config_get(int id, GVariant **data, const struct sr_dev_inst *sdi,
-		const struct sr_probe_group *probe_group)
+		const struct sr_channel_group *cg)
 {
 	struct dev_context *devc;
 
-	(void)probe_group;
+	(void)cg;
 
 	if (!sdi)
 		return SR_ERR_ARG;
@@ -257,7 +252,7 @@ static int config_get(int id, GVariant **data, const struct sr_dev_inst *sdi,
 }
 
 static int config_set(int id, GVariant *data, const struct sr_dev_inst *sdi,
-		const struct sr_probe_group *probe_group)
+		const struct sr_channel_group *cg)
 {
 	struct dev_context *devc;
 	uint16_t flag;
@@ -265,7 +260,7 @@ static int config_set(int id, GVariant *data, const struct sr_dev_inst *sdi,
 	int ret;
 	const char *stropt;
 
-	(void)probe_group;
+	(void)cg;
 
 	if (sdi->status != SR_ST_ACTIVE)
 		return SR_ERR_DEV_CLOSED;
@@ -328,10 +323,10 @@ static int config_set(int id, GVariant *data, const struct sr_dev_inst *sdi,
 	case SR_CONF_SWAP:
 		if (g_variant_get_boolean(data)) {
 			sr_info("Enabling channel swapping.");
-			devc->flag_reg |= FLAG_SWAP_PROBES;
+			devc->flag_reg |= FLAG_SWAP_CHANNELS;
 		} else {
 			sr_info("Disabling channel swapping.");
-			devc->flag_reg &= ~FLAG_SWAP_PROBES;
+			devc->flag_reg &= ~FLAG_SWAP_CHANNELS;
 		}
 		ret = SR_OK;
 		break;
@@ -354,14 +349,14 @@ static int config_set(int id, GVariant *data, const struct sr_dev_inst *sdi,
 }
 
 static int config_list(int key, GVariant **data, const struct sr_dev_inst *sdi,
-		const struct sr_probe_group *probe_group)
+		const struct sr_channel_group *cg)
 {
 	struct dev_context *devc;
 	GVariant *gvar, *grange[2];
 	GVariantBuilder gvb;
 	int num_channels, i;
 
-	(void)probe_group;
+	(void)cg;
 
 	switch (key) {
 	case SR_CONF_SCAN_OPTIONS:
@@ -395,15 +390,21 @@ static int config_list(int key, GVariant **data, const struct sr_dev_inst *sdi,
 			/* Device didn't specify sample memory size in metadata. */
 			return SR_ERR_NA;
 		/*
-		 * Channel groups are turned off if no probes in that group are
+		 * Channel groups are turned off if no channels in that group are
 		 * enabled, making more room for samples for the enabled group.
 		*/
-		ols_configure_probes(sdi);
+		ols_configure_channels(sdi);
 		num_channels = 0;
 		for (i = 0; i < 4; i++) {
-			if (devc->probe_mask & (0xff << (i * 8)))
+			if (devc->channel_mask & (0xff << (i * 8)))
 				num_channels++;
 		}
+		if (num_channels == 0) {
+			/* This can happen, but shouldn't cause too much drama.
+			 * However we can't continue because the code below would
+			 * divide by zero. */
+			break;
+		}
 		grange[0] = g_variant_new_uint64(MIN_NUM_SAMPLES);
 		grange[1] = g_variant_new_uint64(devc->max_samples / num_channels);
 		*data = g_variant_new_tuple(grange, 2);
@@ -415,17 +416,52 @@ static int config_list(int key, GVariant **data, const struct sr_dev_inst *sdi,
 	return SR_OK;
 }
 
+static int set_trigger(const struct sr_dev_inst *sdi, int stage)
+{
+	struct dev_context *devc;
+	struct sr_serial_dev_inst *serial;
+	uint8_t cmd, arg[4];
+
+	devc = sdi->priv;
+	serial = sdi->conn;
+
+	cmd = CMD_SET_TRIGGER_MASK + stage * 4;
+	arg[0] = devc->trigger_mask[stage] & 0xff;
+	arg[1] = (devc->trigger_mask[stage] >> 8) & 0xff;
+	arg[2] = (devc->trigger_mask[stage] >> 16) & 0xff;
+	arg[3] = (devc->trigger_mask[stage] >> 24) & 0xff;
+	if (send_longcommand(serial, cmd, arg) != SR_OK)
+		return SR_ERR;
+
+	cmd = CMD_SET_TRIGGER_VALUE + stage * 4;
+	arg[0] = devc->trigger_value[stage] & 0xff;
+	arg[1] = (devc->trigger_value[stage] >> 8) & 0xff;
+	arg[2] = (devc->trigger_value[stage] >> 16) & 0xff;
+	arg[3] = (devc->trigger_value[stage] >> 24) & 0xff;
+	if (send_longcommand(serial, cmd, arg) != SR_OK)
+		return SR_ERR;
+
+	cmd = CMD_SET_TRIGGER_CONFIG + stage * 4;
+	arg[0] = arg[1] = arg[3] = 0x00;
+	arg[2] = stage;
+	if (stage == devc->num_stages)
+		/* Last stage, fire when this one matches. */
+		arg[3] |= TRIGGER_START;
+	if (send_longcommand(serial, cmd, arg) != SR_OK)
+		return SR_ERR;
+
+	return SR_OK;
+}
+
 static int dev_acquisition_start(const struct sr_dev_inst *sdi,
 		void *cb_data)
 {
 	struct dev_context *devc;
 	struct sr_serial_dev_inst *serial;
-	uint32_t trigger_config[4];
-	uint32_t data;
 	uint16_t samplecount, readcount, delaycount;
-	uint8_t changrp_mask;
+	uint8_t changrp_mask, arg[4];
 	int num_channels;
-	int i;
+	int ret, i;
 
 	if (sdi->status != SR_ST_ACTIVE)
 		return SR_ERR_DEV_CLOSED;
@@ -433,20 +469,20 @@ static int dev_acquisition_start(const struct sr_dev_inst *sdi,
 	devc = sdi->priv;
 	serial = sdi->conn;
 
-	if (ols_configure_probes(sdi) != SR_OK) {
-		sr_err("Failed to configure probes.");
+	if (ols_configure_channels(sdi) != SR_OK) {
+		sr_err("Failed to configure channels.");
 		return SR_ERR;
 	}
 
 	/*
 	 * Enable/disable channel groups in the flag register according to the
-	 * probe mask. Calculate this here, because num_channels is needed
+	 * channel mask. Calculate this here, because num_channels is needed
 	 * to limit readcount.
 	 */
 	changrp_mask = 0;
 	num_channels = 0;
 	for (i = 0; i < 4; i++) {
-		if (devc->probe_mask & (0xff << (i * 8))) {
+		if (devc->channel_mask & (0xff << (i * 8))) {
 			changrp_mask |= (1 << i);
 			num_channels++;
 		}
@@ -458,92 +494,62 @@ static int dev_acquisition_start(const struct sr_dev_inst *sdi,
 	 */
 	samplecount = MIN(devc->max_samples / num_channels, devc->limit_samples);
 	readcount = samplecount / 4;
-	if (samplecount % 4)
+
+	/* Rather read too many samples than too few. */
+	if (samplecount % 4 != 0)
 		readcount++;
 
-	memset(trigger_config, 0, 16);
-	trigger_config[devc->num_stages] |= 0x08;
-	if (devc->trigger_mask[0]) {
+	/* Basic triggers. */
+	if (devc->trigger_mask[0] != 0x00000000) {
+		/* At least one channel has a trigger on it. */
 		delaycount = readcount * (1 - devc->capture_ratio / 100.0);
 		devc->trigger_at = (readcount - delaycount) * 4 - devc->num_stages;
-
-		if (send_longcommand(serial, CMD_SET_TRIGGER_MASK_0,
-			reverse32(devc->trigger_mask[0])) != SR_OK)
-			return SR_ERR;
-		if (send_longcommand(serial, CMD_SET_TRIGGER_VALUE_0,
-			reverse32(devc->trigger_value[0])) != SR_OK)
-			return SR_ERR;
-		if (send_longcommand(serial, CMD_SET_TRIGGER_CONFIG_0,
-			trigger_config[0]) != SR_OK)
-			return SR_ERR;
-
-		if (send_longcommand(serial, CMD_SET_TRIGGER_MASK_1,
-			reverse32(devc->trigger_mask[1])) != SR_OK)
-			return SR_ERR;
-		if (send_longcommand(serial, CMD_SET_TRIGGER_VALUE_1,
-			reverse32(devc->trigger_value[1])) != SR_OK)
-			return SR_ERR;
-		if (send_longcommand(serial, CMD_SET_TRIGGER_CONFIG_1,
-			trigger_config[1]) != SR_OK)
-			return SR_ERR;
-
-		if (send_longcommand(serial, CMD_SET_TRIGGER_MASK_2,
-			reverse32(devc->trigger_mask[2])) != SR_OK)
-			return SR_ERR;
-		if (send_longcommand(serial, CMD_SET_TRIGGER_VALUE_2,
-			reverse32(devc->trigger_value[2])) != SR_OK)
-			return SR_ERR;
-		if (send_longcommand(serial, CMD_SET_TRIGGER_CONFIG_2,
-			trigger_config[2]) != SR_OK)
-			return SR_ERR;
-
-		if (send_longcommand(serial, CMD_SET_TRIGGER_MASK_3,
-			reverse32(devc->trigger_mask[3])) != SR_OK)
-			return SR_ERR;
-		if (send_longcommand(serial, CMD_SET_TRIGGER_VALUE_3,
-			reverse32(devc->trigger_value[3])) != SR_OK)
-			return SR_ERR;
-		if (send_longcommand(serial, CMD_SET_TRIGGER_CONFIG_3,
-			trigger_config[3]) != SR_OK)
-			return SR_ERR;
+		for (i = 0; i <= devc->num_stages; i++) {
+			sr_dbg("Setting stage %d trigger.", i);
+			if ((ret = set_trigger(sdi, i)) != SR_OK)
+				return ret;
+		}
 	} else {
-		if (send_longcommand(serial, CMD_SET_TRIGGER_MASK_0,
-				devc->trigger_mask[0]) != SR_OK)
-			return SR_ERR;
-		if (send_longcommand(serial, CMD_SET_TRIGGER_VALUE_0,
-				devc->trigger_value[0]) != SR_OK)
-			return SR_ERR;
-		if (send_longcommand(serial, CMD_SET_TRIGGER_CONFIG_0,
-		     0x00000008) != SR_OK)
-			return SR_ERR;
+		/* No triggers configured, force trigger on first stage. */
+		sr_dbg("Forcing trigger at stage 0.");
+		if ((ret = set_trigger(sdi, 0)) != SR_OK)
+			return ret;
 		delaycount = readcount;
 	}
 
 	/* Samplerate. */
-	sr_info("Setting samplerate to %" PRIu64 "Hz (divider %u)",
+	sr_dbg("Setting samplerate to %" PRIu64 "Hz (divider %u)",
 			devc->cur_samplerate, devc->cur_samplerate_divider);
-	if (send_longcommand(serial, CMD_SET_DIVIDER,
-			reverse32(devc->cur_samplerate_divider)) != SR_OK)
+	arg[0] = devc->cur_samplerate_divider & 0xff;
+	arg[1] = (devc->cur_samplerate_divider & 0xff00) >> 8;
+	arg[2] = (devc->cur_samplerate_divider & 0xff0000) >> 16;
+	arg[3] = 0x00;
+	if (send_longcommand(serial, CMD_SET_DIVIDER, arg) != SR_OK)
 		return SR_ERR;
 
 	/* Send sample limit and pre/post-trigger capture ratio. */
-	sr_info("Setting sample limit %d, trigger point at %d",
+	sr_dbg("Setting sample limit %d, trigger point at %d",
 			(readcount - 1) * 4, (delaycount - 1) * 4);
-	data = ((readcount - 1) & 0xffff) << 16;
-	data |= (delaycount - 1) & 0xffff;
-	if (send_longcommand(serial, CMD_CAPTURE_SIZE, reverse16(data)) != SR_OK)
+	arg[0] = ((readcount - 1) & 0xff);
+	arg[1] = ((readcount - 1) & 0xff00) >> 8;
+	arg[2] = ((delaycount - 1) & 0xff);
+	arg[3] = ((delaycount - 1) & 0xff00) >> 8;
+	if (send_longcommand(serial, CMD_CAPTURE_SIZE, arg) != SR_OK)
 		return SR_ERR;
 
 	/* Flag register. */
-	sr_info("Setting demux %s, noise_filter %s, extpat %s, intpat %s",
-			devc->flag_reg & FLAG_DEMUX ? "on" : "off",
-			devc->flag_reg & FLAG_FILTER ? "on": "off",
+	sr_dbg("Setting intpat %s, extpat %s, RLE %s, noise_filter %s, demux %s",
+			devc->flag_reg & FLAG_INTERNAL_TEST_MODE ? "on": "off",
 			devc->flag_reg & FLAG_EXTERNAL_TEST_MODE ? "on": "off",
-			devc->flag_reg & FLAG_INTERNAL_TEST_MODE ? "on": "off");
+			devc->flag_reg & FLAG_RLE ? "on" : "off",
+			devc->flag_reg & FLAG_FILTER ? "on": "off",
+			devc->flag_reg & FLAG_DEMUX ? "on" : "off");
 	/* 1 means "disable channel". */
 	devc->flag_reg |= ~(changrp_mask << 2) & 0x3c;
-	data = (devc->flag_reg << 24) | ((devc->flag_reg << 8) & 0xff0000);
-	if (send_longcommand(serial, CMD_SET_FLAGS, data) != SR_OK)
+	arg[0] = devc->flag_reg & 0xff;
+	arg[1] = devc->flag_reg >> 8;
+	arg[2] = arg[3] = 0x00;
+	if (send_longcommand(serial, CMD_SET_FLAGS, arg) != SR_OK)
 		return SR_ERR;
 
 	/* Start acquisition on the device. */
@@ -553,6 +559,7 @@ static int dev_acquisition_start(const struct sr_dev_inst *sdi,
 	/* Reset all operational states. */
 	devc->rle_count = devc->num_transfers = 0;
 	devc->num_samples = devc->num_bytes = 0;
+	devc->cnt_bytes = devc->cnt_samples = devc->cnt_samples_rle = 0;
 	memset(devc->sample, 0, 4);
 
 	/* Send header packet to the session bus. */
@@ -580,7 +587,7 @@ SR_PRIV struct sr_dev_driver ols_driver_info = {
 	.cleanup = cleanup,
 	.scan = scan,
 	.dev_list = dev_list,
-	.dev_clear = dev_clear,
+	.dev_clear = NULL,
 	.config_get = config_get,
 	.config_set = config_set,
 	.config_list = config_list,