X-Git-Url: https://sigrok.org/gitweb/?a=blobdiff_plain;f=hardware%2Ffx2lafw%2Ffx2lafw.c;h=afdd95019b8bad440c1127038d90a18037dfbb5e;hb=f3ab43a8fbc39fe786718a7a3f5528acb3150aa7;hp=6b184b70d8f9ff0178dca18f1aa49b3609a7dd08;hpb=e21e846330070e102b24e08605b76b362020f500;p=libsigrok.git

diff --git a/hardware/fx2lafw/fx2lafw.c b/hardware/fx2lafw/fx2lafw.c
index 6b184b70..afdd9501 100644
--- a/hardware/fx2lafw/fx2lafw.c
+++ b/hardware/fx2lafw/fx2lafw.c
@@ -774,17 +774,14 @@ static void receive_transfer(struct libusb_transfer *transfer)
 					ctx->trigger_stage = TRIGGER_FIRED;
 					break;
 				}
-				return;
-			}
-
-			/*
-			 * We had a match before, but not in the next sample. However, we may
-			 * have a match on this stage in the next bit -- trigger on 0001 will
-			 * fail on seeing 00001, so we need to go back to stage 0 -- but at
-			 * the next sample from the one that matched originally, which the
-			 * counter increment at the end of the loop takes care of.
-			 */
-			if (ctx->trigger_stage > 0) {
+			} else if (ctx->trigger_stage > 0) {
+				/*
+				 * We had a match before, but not in the next sample. However, we may
+				 * have a match on this stage in the next bit -- trigger on 0001 will
+				 * fail on seeing 00001, so we need to go back to stage 0 -- but at
+				 * the next sample from the one that matched originally, which the
+				 * counter increment at the end of the loop takes care of.
+				 */
 				i -= ctx->trigger_stage;
 				if (i < -1)
 					i = -1; /* Oops, went back past this buffer. */