X-Git-Url: https://sigrok.org/gitweb/?a=blobdiff_plain;f=hardware%2Ffx2lafw%2Ffx2lafw.c;h=0ea4030d7b1fcffb2f81f191275f43fa3a17fab8;hb=0a8c0c324e16e4848498309dbb2efd27b4c812a9;hp=5ec1f492f2ecdd902739b8c7fa73d0a9b1f9c8cd;hpb=13bf7eccbb08214c3d6d53da5b5b6a269a64a779;p=libsigrok.git diff --git a/hardware/fx2lafw/fx2lafw.c b/hardware/fx2lafw/fx2lafw.c index 5ec1f492..0ea4030d 100644 --- a/hardware/fx2lafw/fx2lafw.c +++ b/hardware/fx2lafw/fx2lafw.c @@ -1,6 +1,7 @@ /* * This file is part of the sigrok project. * + * Copyright (C) 2010-2012 Bert Vermeulen * Copyright (C) 2012 Joel Holdsworth * * This program is free software: you can redistribute it and/or modify @@ -19,8 +20,8 @@ #include #include +#include #include -#include #include #include "config.h" #include "sigrok.h" @@ -32,6 +33,7 @@ static const struct fx2lafw_profile supported_fx2[] = { /* * CWAV USBee AX * EE Electronics ESLA201A + * ARMFLY AX-Pro */ { 0x08a9, 0x0014, "CWAV", "USBee AX", NULL, FIRMWARE_DIR "/fx2lafw-cwav-usbeeax.fw", 8 }, @@ -46,10 +48,25 @@ static const struct fx2lafw_profile supported_fx2[] = { * Saleae Logic * EE Electronics ESLA100 * Robomotic MiniLogic + * Robomotic BugLogic 3 */ { 0x0925, 0x3881, "Saleae", "Logic", NULL, FIRMWARE_DIR "/fx2lafw-saleae-logic.fw", 8 }, + /* + * Default Cypress FX2 without EEPROM, e.g.: + * Lcsoft Mini Board + * Braintechnology USB Interface V2.x + */ + { 0x04B4, 0x8613, "Cypress", "FX2", NULL, + FIRMWARE_DIR "/fx2lafw-cypress-fx2.fw", 8 }, + + /* + * Braintechnology USB-LPS + */ + { 0x16d0, 0x0498, "Braintechnology", "USB-LPS", NULL, + FIRMWARE_DIR "/fx2lafw-braintechnology-usb-lps.fw", 8 }, + { 0, 0, 0, 0, 0, 0, 0 } }; @@ -79,6 +96,13 @@ static const char *probe_names[] = { }; static uint64_t supported_samplerates[] = { + SR_KHZ(20), + SR_KHZ(25), + SR_KHZ(50), + SR_KHZ(100), + SR_KHZ(200), + SR_KHZ(250), + SR_KHZ(500), SR_MHZ(1), SR_MHZ(2), SR_MHZ(3), @@ -88,6 +112,7 @@ static uint64_t supported_samplerates[] = { SR_MHZ(12), SR_MHZ(16), SR_MHZ(24), + 0, }; static struct sr_samplerates samplerates = { @@ -112,48 +137,37 @@ static int hw_dev_acquisition_stop(int dev_index, void *cb_data); static gboolean check_conf_profile(libusb_device *dev) { struct libusb_device_descriptor des; - struct libusb_config_descriptor *conf_dsc = NULL; - const struct libusb_interface_descriptor *intf_dsc; - gboolean ret = FALSE; + struct libusb_device_handle *hdl; + gboolean ret; + unsigned char strdesc[64]; + hdl = NULL; + ret = FALSE; while (!ret) { /* Assume the FW has not been loaded, unless proven wrong. */ - ret = FALSE; - if (libusb_get_device_descriptor(dev, &des) != 0) break; - /* Need exactly 1 configuration. */ - if (des.bNumConfigurations != 1) + if (libusb_open(dev, &hdl) != 0) break; - if (libusb_get_config_descriptor(dev, 0, &conf_dsc) != 0) + if (libusb_get_string_descriptor_ascii(hdl, + des.iManufacturer, strdesc, sizeof(strdesc)) < 0) break; - - /* Need exactly 1 interface. */ - if (conf_dsc->bNumInterfaces != 1) + if (strncmp((const char *)strdesc, "sigrok", 6)) break; - /* Need just one alternate setting. */ - if (conf_dsc->interface[0].num_altsetting != 1) + if (libusb_get_string_descriptor_ascii(hdl, + des.iProduct, strdesc, sizeof(strdesc)) < 0) break; - - /* Need exactly 2 endpoints. */ - intf_dsc = &(conf_dsc->interface[0].altsetting[0]); - if (intf_dsc->bNumEndpoints != 2) - break; - - /* The first endpoint should be 2 (inbound). */ - if ((intf_dsc->endpoint[0].bEndpointAddress & 0x8f) != - (2 | LIBUSB_ENDPOINT_IN)) + if (strncmp((const char *)strdesc, "fx2lafw", 7)) break; /* If we made it here, it must be an fx2lafw. */ ret = TRUE; } - - if (conf_dsc) - libusb_free_config_descriptor(conf_dsc); + if (hdl) + libusb_close(hdl); return ret; } @@ -166,6 +180,7 @@ static int fx2lafw_dev_open(int dev_index) struct context *ctx; struct version_info vi; int ret, skip, i; + uint8_t revid; if (!(sdi = sr_dev_inst_get(dev_insts, dev_index))) return SR_ERR; @@ -223,25 +238,36 @@ static int fx2lafw_dev_open(int dev_index) break; } - if((ret = command_get_fw_version(ctx->usb->devhdl, &vi)) != SR_OK) { + ret = command_get_fw_version(ctx->usb->devhdl, &vi); + if (ret != SR_OK) { sr_err("fx2lafw: Failed to retrieve " - "firmware version information"); + "firmware version information."); + break; + } + + ret = command_get_revid_version(ctx->usb->devhdl, &revid); + if (ret != SR_OK) { + sr_err("fx2lafw: Failed to retrieve REVID."); break; } - if(vi.major != FX2LAFW_VERSION_MAJOR || - vi.minor != FX2LAFW_VERSION_MINOR) { - sr_err("fx2lafw: Expected firmware version %d.%02d " - "got %d.%02d", FX2LAFW_VERSION_MAJOR, - FX2LAFW_VERSION_MINOR, vi.major, vi.minor); + /* + * Changes in major version mean incompatible/API changes, so + * bail out if we encounter an incompatible version. + * Different minor versions are OK, they should be compatible. + */ + if (vi.major != FX2LAFW_REQUIRED_VERSION_MAJOR) { + sr_err("fx2lafw: Expected firmware version %d.x, " + "got %d.%d.", FX2LAFW_REQUIRED_VERSION_MAJOR, + vi.major, vi.minor); break; } sdi->status = SR_ST_ACTIVE; sr_info("fx2lafw: Opened device %d on %d.%d " - "interface %d, firmware version %d.%02d", + "interface %d, firmware %d.%d, REVID %d.", sdi->index, ctx->usb->bus, ctx->usb->address, - USB_INTERFACE, vi.major, vi.minor); + USB_INTERFACE, vi.major, vi.minor, revid); break; } @@ -351,7 +377,7 @@ static int hw_init(const char *devinfo) return 0; } - /* Find all fx2lafw compatible devices and upload firware to them. */ + /* Find all fx2lafw compatible devices and upload firmware to them. */ libusb_get_device_list(usb_context, &devlist); for (i = 0; devlist[i]; i++) { @@ -394,7 +420,7 @@ static int hw_init(const char *devinfo) if (ezusb_upload_firmware(devlist[i], USB_CONFIGURATION, prof->firmware) == SR_OK) /* Remember when the firmware on this device was updated */ - g_get_current_time(&ctx->fw_updated); + ctx->fw_updated = g_get_monotonic_time(); else sr_err("fx2lafw: Firmware upload failed for " "device %d.", devcnt); @@ -411,33 +437,37 @@ static int hw_init(const char *devinfo) static int hw_dev_open(int dev_index) { - GTimeVal cur_time; struct sr_dev_inst *sdi; struct context *ctx; - int timediff, ret; + int ret; + int64_t timediff_us, timediff_ms; if (!(sdi = sr_dev_inst_get(dev_insts, dev_index))) return SR_ERR; ctx = sdi->priv; /* - * if the firmware was recently uploaded, wait up to MAX_RENUM_DELAY ms - * for the FX2 to renumerate + * If the firmware was recently uploaded, wait up to MAX_RENUM_DELAY_MS + * milliseconds for the FX2 to renumerate. */ ret = 0; - if (GTV_TO_MSEC(ctx->fw_updated) > 0) { + + if (ctx->fw_updated > 0) { sr_info("fx2lafw: Waiting for device to reset."); /* takes at least 300ms for the FX2 to be gone from the USB bus */ g_usleep(300 * 1000); - timediff = 0; - while (timediff < MAX_RENUM_DELAY) { + timediff_ms = 0; + while (timediff_ms < MAX_RENUM_DELAY_MS) { if ((ret = fx2lafw_dev_open(dev_index)) == SR_OK) break; g_usleep(100 * 1000); - g_get_current_time(&cur_time); - timediff = GTV_TO_MSEC(cur_time) - GTV_TO_MSEC(ctx->fw_updated); + + timediff_us = g_get_monotonic_time() - ctx->fw_updated; + timediff_ms = timediff_us / G_USEC_PER_SEC; + sr_spew("fx2lafw: timediff: %" PRIi64 " us.", + timediff_us); } - sr_info("fx2lafw: Device came back after %d ms.", timediff); + sr_info("fx2lafw: Device came back after %d ms.", timediff_ms); } else { ret = fx2lafw_dev_open(dev_index); }