X-Git-Url: https://sigrok.org/gitweb/?a=blobdiff_plain;f=hardware%2Fcommon%2Fezusb.c;h=77817a71bc36c1bc0f9307087ad5232ff11054ed;hb=1740429d7045385866caafb0d2cbe302e7c74604;hp=947fe1f834c1d7662c3a791a153c2aabdaafe8b5;hpb=d4928d7102c6b2f9f7aa51a1b98669bf148fff80;p=libsigrok.git

diff --git a/hardware/common/ezusb.c b/hardware/common/ezusb.c
index 947fe1f8..77817a71 100644
--- a/hardware/common/ezusb.c
+++ b/hardware/common/ezusb.c
@@ -50,7 +50,7 @@ SR_PRIV int ezusb_reset(struct libusb_device_handle *hdl, int set_clear)
 	ret = libusb_control_transfer(hdl, LIBUSB_REQUEST_TYPE_VENDOR, 0xa0,
 				      0xe600, 0x0000, buf, 1, 100);
 	if (ret < 0)
-		sr_err("Unable to send control request: %s",
+		sr_err("Unable to send control request: %s.",
 				libusb_error_name(ret));
 
 	return ret;
@@ -80,7 +80,7 @@ SR_PRIV int ezusb_install_firmware(libusb_device_handle *hdl,
 					      LIBUSB_ENDPOINT_OUT, 0xa0, offset,
 					      0x0000, buf, chunksize, 100);
 		if (ret < 0) {
-			sr_err("Unable to send firmware to device: %s",
+			sr_err("Unable to send firmware to device: %s.",
 					libusb_error_name(ret));
 			result = SR_ERR;
 			break;
@@ -104,8 +104,7 @@ SR_PRIV int ezusb_upload_firmware(libusb_device *dev, int configuration,
 		libusb_get_bus_number(dev), libusb_get_device_address(dev));
 
 	if ((ret = libusb_open(dev, &hdl)) < 0) {
-		sr_err("ezusb: failed to open device: %s",
-				libusb_error_name(ret));
+		sr_err("failed to open device: %s.", libusb_error_name(ret));
 		return SR_ERR;
 	}