X-Git-Url: https://sigrok.org/gitweb/?a=blobdiff_plain;f=hardware%2Fatten-pps3xxx%2Fapi.c;h=28b22015d3fd13f449c0379cf7f84d92b5e8363b;hb=HEAD;hp=c7e976011a0c1f878e8da708407bd40cfc481ae7;hpb=a66307424e7a14df8f53e04d5ff77436dbaa830f;p=libsigrok.git

diff --git a/hardware/atten-pps3xxx/api.c b/hardware/atten-pps3xxx/api.c
deleted file mode 100644
index c7e97601..00000000
--- a/hardware/atten-pps3xxx/api.c
+++ /dev/null
@@ -1,517 +0,0 @@
-/*
- * This file is part of the libsigrok project.
- *
- * Copyright (C) 2014 Bert Vermeulen <bert@biot.com>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <string.h>
-#include <errno.h>
-#include "protocol.h"
-
-/*
- * The default serial communication settings on the device are 9600
- * baud, 9 data bits. The 9th bit isn't actually used, and the vendor
- * software uses Mark parity to absorb the extra bit.
- *
- * Since 9 data bits is not a standard available in POSIX, we use two
- * stop bits to skip over the extra bit instead.
- */
-#define SERIALCOMM "9600/8n2"
-
-static const int32_t scanopts[] = {
-	SR_CONF_CONN,
-	SR_CONF_SERIALCOMM,
-};
-
-static const int32_t devopts[] = {
-	SR_CONF_POWER_SUPPLY,
-	SR_CONF_CONTINUOUS,
-	SR_CONF_OUTPUT_CHANNEL,
-	SR_CONF_OVER_CURRENT_PROTECTION,
-};
-
-static const int32_t devopts_pg[] = {
-	SR_CONF_OUTPUT_VOLTAGE,
-	SR_CONF_OUTPUT_VOLTAGE_MAX,
-	SR_CONF_OUTPUT_CURRENT,
-	SR_CONF_OUTPUT_CURRENT_MAX,
-	SR_CONF_OUTPUT_ENABLED,
-};
-
-static const char *channel_modes[] = {
-	"Independent",
-	"Series",
-	"Parallel",
-};
-
-static struct pps_model models[] = {
-	{ PPS_3203T_3S, "PPS3203T-3S",
-		CHANMODE_INDEPENDENT | CHANMODE_SERIES | CHANMODE_PARALLEL,
-		3,
-		{
-			/* Channel 1 */
-			{ { 0, 32, 0.01 }, { 0, 3, 0.001 } },
-			/* Channel 2 */
-			{ { 0, 32, 0.01 }, { 0, 3, 0.001 } },
-			/* Channel 3 */
-			{ { 0, 6, 0.01 }, { 0, 3, 0.001 } },
-		},
-	},
-};
-
-
-SR_PRIV struct sr_dev_driver atten_pps3203_driver_info;
-static struct sr_dev_driver *di = &atten_pps3203_driver_info;
-
-static int init(struct sr_context *sr_ctx)
-{
-	return std_init(sr_ctx, di, LOG_PREFIX);
-}
-
-static GSList *scan(GSList *options, int modelid)
-{
-	struct sr_dev_inst *sdi;
-	struct drv_context *drvc;
-	struct dev_context *devc;
-	struct sr_config *src;
-	struct sr_probe *probe;
-	struct sr_probe_group *pg;
-	struct sr_serial_dev_inst *serial;
-	GSList *l, *devices;
-	struct pps_model *model;
-	uint8_t packet[PACKET_SIZE];
-	unsigned int i;
-	int ret;
-	const char *conn, *serialcomm;
-	char channel[10];
-
-	devices = NULL;
-	drvc = di->priv;
-	drvc->instances = NULL;
-
-	conn = serialcomm = NULL;
-	for (l = options; l; l = l->next) {
-		src = l->data;
-		switch (src->key) {
-		case SR_CONF_CONN:
-			conn = g_variant_get_string(src->data, NULL);
-			break;
-		case SR_CONF_SERIALCOMM:
-			serialcomm = g_variant_get_string(src->data, NULL);
-			break;
-		}
-	}
-	if (!conn)
-		return NULL;
-	if (!serialcomm)
-		serialcomm = SERIALCOMM;
-
-	if (!(serial = sr_serial_dev_inst_new(conn, serialcomm)))
-		return NULL;
-
-	if (serial_open(serial, SERIAL_RDWR | SERIAL_NONBLOCK) != SR_OK)
-		return NULL;
-	serial_flush(serial);
-
-	/* This is how the vendor software probes for hardware. */
-	memset(packet, 0, PACKET_SIZE);
-	packet[0] = 0xaa;
-	packet[1] = 0xaa;
-	if (serial_write(serial, packet, PACKET_SIZE) == -1) {
-		sr_err("Unable to write while probing for hardware: %s",
-				strerror(errno));
-		return NULL;
-	}
-	/* The device responds with a 24-byte packet when it receives a packet.
-	 * At 9600 baud, 300ms is long enough for it to have arrived. */
-	g_usleep(300 * 1000);
-	memset(packet, 0, PACKET_SIZE);
-	if ((ret = serial_read_nonblocking(serial, packet, PACKET_SIZE)) < 0) {
-		sr_err("Unable to read while probing for hardware: %s",
-				strerror(errno));
-		return NULL;
-	}
-	if (ret != PACKET_SIZE || packet[0] != 0xaa || packet[1] != 0xaa) {
-		/* Doesn't look like an Atten PPS. */
-		return NULL;
-	}
-
-	model = NULL;
-	for (i = 0; i < ARRAY_SIZE(models); i++) {
-		if (models[i].modelid == modelid) {
-			model = &models[i];
-			break;
-		}
-	}
-	if (!model) {
-		sr_err("Unknown modelid %d", modelid);
-		return NULL;
-	}
-
-	sdi = sr_dev_inst_new(0, SR_ST_INACTIVE, "Atten", model->name, NULL);
-	sdi->driver = di;
-	sdi->inst_type = SR_INST_SERIAL;
-	sdi->conn = serial;
-	for (i = 0; i < MAX_CHANNELS; i++) {
-		snprintf(channel, 10, "CH%d", i + 1);
-		probe = sr_probe_new(i, SR_PROBE_ANALOG, TRUE, channel);
-		sdi->probes = g_slist_append(sdi->probes, probe);
-		pg = g_malloc(sizeof(struct sr_probe_group));
-		pg->name = g_strdup(channel);
-		pg->probes = g_slist_append(NULL, probe);
-		pg->priv = NULL;
-		sdi->probe_groups = g_slist_append(sdi->probe_groups, pg);
-	}
-
-	devc = g_malloc0(sizeof(struct dev_context));
-	devc->model = model;
-	devc->config = g_malloc0(sizeof(struct per_channel_config) * model->num_channels);
-	sdi->priv = devc;
-	drvc->instances = g_slist_append(drvc->instances, sdi);
-	devices = g_slist_append(devices, sdi);
-
-	serial_close(serial);
-	if (!devices)
-		sr_serial_dev_inst_free(serial);
-
-	return devices;
-}
-
-static GSList *scan_3203(GSList *options)
-{
-	return scan(options, PPS_3203T_3S);
-}
-
-static GSList *dev_list(void)
-{
-	return ((struct drv_context *)(di->priv))->instances;
-}
-
-static int cleanup(void)
-{
-	return std_dev_clear(di, NULL);
-}
-
-static int config_get(int key, GVariant **data, const struct sr_dev_inst *sdi,
-		const struct sr_probe_group *probe_group)
-{
-	struct dev_context *devc;
-	struct sr_probe *probe;
-	int channel, ret;
-
-	if (!sdi)
-		return SR_ERR_ARG;
-
-	devc = sdi->priv;
-
-	ret = SR_OK;
-	if (!probe_group) {
-		/* No probe group: global options. */
-		switch (key) {
-		case SR_CONF_OUTPUT_CHANNEL:
-			*data = g_variant_new_string(channel_modes[devc->channel_mode]);
-			break;
-		case SR_CONF_OVER_CURRENT_PROTECTION:
-			*data = g_variant_new_boolean(devc->over_current_protection);
-			break;
-		default:
-			return SR_ERR_NA;
-		}
-	} else {
-		/* We only ever have one channel per probe group in this driver. */
-		probe = probe_group->probes->data;
-		channel = probe->index;
-
-		switch (key) {
-		case SR_CONF_OUTPUT_VOLTAGE:
-			*data = g_variant_new_double(devc->config[channel].output_voltage_last);
-			break;
-		case SR_CONF_OUTPUT_VOLTAGE_MAX:
-			*data = g_variant_new_double(devc->config[channel].output_voltage_max);
-			break;
-		case SR_CONF_OUTPUT_CURRENT:
-			*data = g_variant_new_double(devc->config[channel].output_current_last);
-			break;
-		case SR_CONF_OUTPUT_CURRENT_MAX:
-			*data = g_variant_new_double(devc->config[channel].output_current_max);
-			break;
-		case SR_CONF_OUTPUT_ENABLED:
-			*data = g_variant_new_boolean(devc->config[channel].output_enabled);
-			break;
-		default:
-			return SR_ERR_NA;
-		}
-	}
-
-	return ret;
-}
-
-static int find_str(const char *str, const char **strings, int array_size)
-{
-	int idx, i;
-
-	idx = -1;
-	for (i = 0; i < array_size; i++) {
-		if (!strcmp(str, strings[i])) {
-			idx = i;
-			break;
-		}
-	}
-
-	return idx;
-}
-
-static int config_set(int key, GVariant *data, const struct sr_dev_inst *sdi,
-		const struct sr_probe_group *probe_group)
-{
-	struct dev_context *devc;
-	struct sr_probe *probe;
-	gdouble dval;
-	int channel, ret, ival;
-	const char *sval;
-	gboolean bval;
-
-	if (sdi->status != SR_ST_ACTIVE)
-		return SR_ERR_DEV_CLOSED;
-
-	ret = SR_OK;
-	devc = sdi->priv;
-	if (!probe_group) {
-		/* No probe group: global options. */
-		switch (key) {
-		case SR_CONF_OUTPUT_CHANNEL:
-			sval = g_variant_get_string(data, NULL);
-			if ((ival = find_str(sval, channel_modes,
-							ARRAY_SIZE(channel_modes))) == -1) {
-				ret = SR_ERR_ARG;
-				break;
-			}
-			if (devc->model->channel_modes && (1 << ival) == 0) {
-				/* Not supported on this model. */
-				ret = SR_ERR_ARG;
-			}
-			if (ival == devc->channel_mode_set)
-				/* Nothing to do. */
-				break;
-			devc->channel_mode_set = ival;
-			devc->config_dirty = TRUE;
-			break;
-		case SR_CONF_OVER_CURRENT_PROTECTION:
-			bval = g_variant_get_boolean(data);
-			if (bval == devc->over_current_protection_set)
-				/* Nothing to do. */
-				break;
-			devc->over_current_protection_set = bval;
-			devc->config_dirty = TRUE;
-			break;
-		default:
-			return SR_ERR_NA;
-		}
-	} else {
-		/* Probe group specified: per-channel options. */
-		/* We only ever have one channel per probe group in this driver. */
-		probe = probe_group->probes->data;
-		channel = probe->index;
-
-		switch (key) {
-		case SR_CONF_OUTPUT_VOLTAGE_MAX:
-			dval = g_variant_get_double(data);
-			if (dval < 0 || dval > devc->model->channels[channel].voltage[1])
-				ret = SR_ERR_ARG;
-			devc->config[channel].output_voltage_max = dval;
-			devc->config_dirty = TRUE;
-			break;
-		case SR_CONF_OUTPUT_CURRENT_MAX:
-			dval = g_variant_get_double(data);
-			if (dval < 0 || dval > devc->model->channels[channel].current[1])
-				ret = SR_ERR_ARG;
-			devc->config[channel].output_current_max = dval;
-			devc->config_dirty = TRUE;
-			break;
-		case SR_CONF_OUTPUT_ENABLED:
-			bval = g_variant_get_boolean(data);
-			if (bval == devc->config[channel].output_enabled_set)
-				/* Nothing to do. */
-				break;
-			devc->config[channel].output_enabled_set = bval;
-			devc->config_dirty = TRUE;
-			break;
-		default:
-			ret = SR_ERR_NA;
-		}
-	}
-
-
-	return ret;
-}
-
-static int config_list(int key, GVariant **data, const struct sr_dev_inst *sdi,
-		const struct sr_probe_group *probe_group)
-{
-	struct dev_context *devc;
-	struct sr_probe *probe;
-	GVariant *gvar;
-	GVariantBuilder gvb;
-	int channel, ret, i;
-
-	/* Always available, even without sdi. */
-	if (key == SR_CONF_SCAN_OPTIONS) {
-		*data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32,
-				scanopts, ARRAY_SIZE(scanopts), sizeof(int32_t));
-		return SR_OK;
-	}
-
-	if (!sdi)
-		return SR_ERR_ARG;
-	devc = sdi->priv;
-
-	ret = SR_OK;
-	if (!probe_group) {
-		/* No probe group: global options. */
-		switch (key) {
-		case SR_CONF_DEVICE_OPTIONS:
-			*data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32,
-					devopts, ARRAY_SIZE(devopts), sizeof(int32_t));
-			break;
-		case SR_CONF_OUTPUT_CHANNEL:
-			if (devc->model->channel_modes == CHANMODE_INDEPENDENT) {
-				/* The 1-channel models. */
-				*data = g_variant_new_strv(channel_modes, 1);
-			} else {
-				/* The other models support all modes. */
-				*data = g_variant_new_strv(channel_modes, ARRAY_SIZE(channel_modes));
-			}
-			break;
-		default:
-			return SR_ERR_NA;
-		}
-	} else {
-		/* Probe group specified: per-channel options. */
-		if (!sdi)
-			return SR_ERR_ARG;
-		/* We only ever have one channel per probe group in this driver. */
-		probe = probe_group->probes->data;
-		channel = probe->index;
-
-		switch (key) {
-		case SR_CONF_DEVICE_OPTIONS:
-			*data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32,
-					devopts_pg, ARRAY_SIZE(devopts_pg), sizeof(int32_t));
-			break;
-		case SR_CONF_OUTPUT_VOLTAGE_MAX:
-			g_variant_builder_init(&gvb, G_VARIANT_TYPE_ARRAY);
-			/* Min, max, step. */
-			for (i = 0; i < 3; i++) {
-				gvar = g_variant_new_double(devc->model->channels[channel].voltage[i]);
-				g_variant_builder_add_value(&gvb, gvar);
-			}
-			*data = g_variant_builder_end(&gvb);
-			break;
-		case SR_CONF_OUTPUT_CURRENT_MAX:
-			g_variant_builder_init(&gvb, G_VARIANT_TYPE_ARRAY);
-			/* Min, max, step. */
-			for (i = 0; i < 3; i++) {
-				gvar = g_variant_new_double(devc->model->channels[channel].current[i]);
-				g_variant_builder_add_value(&gvb, gvar);
-			}
-			*data = g_variant_builder_end(&gvb);
-			break;
-		default:
-			return SR_ERR_NA;
-		}
-	}
-
-	return ret;
-}
-
-static int dev_close(struct sr_dev_inst *sdi)
-{
-	struct dev_context *devc;
-
-	devc = sdi->priv;
-	if (devc->config_dirty)
-		/* Some configuration changes were queued up but didn't
-		 * get sent to the device, likely because we were never
-		 * in acquisition mode. Send them out now. */
-		send_config(sdi);
-
-	return std_serial_dev_close(sdi);
-}
-
-static int dev_acquisition_start(const struct sr_dev_inst *sdi,
-		void *cb_data)
-{
-	struct dev_context *devc;
-	struct sr_serial_dev_inst *serial;
-	uint8_t packet[PACKET_SIZE];
-
-	(void)cb_data;
-
-	if (sdi->status != SR_ST_ACTIVE)
-		return SR_ERR_DEV_CLOSED;
-
-	devc = sdi->priv;
-	memset(devc->packet, 0x44, PACKET_SIZE);
-	devc->packet_size = 0;
-
-	devc->acquisition_running = TRUE;
-
-	serial = sdi->conn;
-	serial_source_add(serial, G_IO_IN, 50, atten_pps3xxx_receive_data, (void *)sdi);
-	std_session_send_df_header(cb_data, LOG_PREFIX);
-
-	/* Send a "probe" configuration packet now. */
-	memset(packet, 0, PACKET_SIZE);
-	packet[0] = 0xaa;
-	packet[1] = 0xaa;
-	send_packet(sdi, packet);
-
-	return SR_OK;
-}
-
-static int dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data)
-{
-	struct dev_context *devc;
-
-	(void)cb_data;
-
-	if (sdi->status != SR_ST_ACTIVE)
-		return SR_ERR_DEV_CLOSED;
-
-	devc = sdi->priv;
-	devc->acquisition_running = FALSE;
-
-	return SR_OK;
-}
-
-SR_PRIV struct sr_dev_driver atten_pps3203_driver_info = {
-	.name = "atten-pps3203",
-	.longname = "Atten PPS3203T-3S",
-	.api_version = 1,
-	.init = init,
-	.cleanup = cleanup,
-	.scan = scan_3203,
-	.dev_list = dev_list,
-	.dev_clear = NULL,
-	.config_get = config_get,
-	.config_set = config_set,
-	.config_list = config_list,
-	.dev_open = std_serial_dev_open,
-	.dev_close = dev_close,
-	.dev_acquisition_start = dev_acquisition_start,
-	.dev_acquisition_stop = dev_acquisition_stop,
-	.priv = NULL,
-};