X-Git-Url: https://sigrok.org/gitweb/?a=blobdiff_plain;f=doc%2Fpulseview.1;h=9c9930706114786a50e69e4701e7269a24a67ff8;hb=f1473b5b8800d91f4f90c85247c0c723c3434ae6;hp=2d4253d5891647653be205ceb3e95940ffca9bb7;hpb=1c233fb1491f434ff6bcb39ca02f776a490e0ccb;p=pulseview.git

diff --git a/doc/pulseview.1 b/doc/pulseview.1
index 2d4253d5..9c993070 100644
--- a/doc/pulseview.1
+++ b/doc/pulseview.1
@@ -1,4 +1,4 @@
-.TH PULSEVIEW 1 "March 30, 2018"
+.TH PULSEVIEW 1 "July 31, 2019"
 .SH "NAME"
 PulseView \- Qt-based LA/scope/MSO GUI for sigrok
 .SH "SYNOPSIS"
@@ -47,7 +47,7 @@ Specify the capture device to connect to. If the
 option is not supplied, PulseView attempts to re-connect to the
 most recently used device, or auto-detect available devices.
 .TP
-.BR "\-D, \-\-no\-scan "
+.BR "\-D, \-\-dont\-scan "
 Usually PulseView automatically scans all drivers to find suitable
 devices during program startup. This option disables the auto-scan.
 Users can either specify the
@@ -64,21 +64,19 @@ file.
 .BR "\-I, \-\-input\-format " <format>
 Specifies the format of the input file to be loaded.
 .TP
+.BR "\-s, \-\-settings " <filename>
+Load PulseView session setup to use with the input file. The setup file must be
+in the "PulseView session setup" format (.pvs).
+.TP
 .BR "\-c, \-\-clean"
 Prevents the previously used sessions to be restored from settings storage.
 This is useful if you want only a single session with the file given on the
 command line instead of restoring all previously used sessions as well.
-.TP
-.BR "\-s, \-\-log-to-stdout"
-Don't log to PulseView's internal log window, but rather to stdout.
 .SH "KEYBOARD SHORTCUTS"
 .TP
 .B "f"
 Zoom-to-fit.
 .TP
-.B "o"
-Zoom 1:1.
-.TP
 .B "s"
 Enable / disable sticky scrolling. When enabled, the right edge of the screen
 always shows the most recently captured data.
@@ -99,8 +97,17 @@ gray trace backgrounds.
 .B "SPACE"
 Start / stop an acquisition.
 .TP
-.B "Arrow keys"
-Scroll up/down/left/right.
+.B "Left/right arrow keys"
+Scroll left/right.
+.TP
+.B "Up/down arrow keys"
+Zoom in/out.
+.TP
+.B "Home"
+Jump to the start of the sample data.
+.TP
+.B "End"
+Jump to the end of the sample data.
 .TP
 .B "CTRL+o"
 Open file.
@@ -117,6 +124,9 @@ Group all currently selected traces into a trace group.
 .B "CTRL+u"
 Ungroup the traces in the currently selected trace group.
 .TP
+.B "CTRL+up/down arrow keys"
+Scroll down/up.
+.TP
 .B "CTRL++"
 Zoom in.
 .TP