X-Git-Url: https://sigrok.org/gitweb/?a=blobdiff_plain;f=decoders%2Fguess_bitrate%2F__init__.py;h=21f0cb8bbd933ef701170ac01917b8351c029dae;hb=11fb6d15fd2eb09d390dab902d8155aaba130cf4;hp=86f9466a9b530438ef6f15e628a921fa22258f7c;hpb=56c93143f54601280a119b64b1eea8dc4b591dcb;p=libsigrokdecode.git diff --git a/decoders/guess_bitrate/__init__.py b/decoders/guess_bitrate/__init__.py index 86f9466..21f0cb8 100644 --- a/decoders/guess_bitrate/__init__.py +++ b/decoders/guess_bitrate/__init__.py @@ -14,13 +14,12 @@ ## GNU General Public License for more details. ## ## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## along with this program; if not, see . ## ''' This protocol decoder tries to guess the bitrate / baudrate of the -communication on the specified probe. Typically this will be used to +communication on the specified channel. Typically this will be used to guess / detect the baudrate used in a UART communication snippet, but it could also be used to guess bitrates of certain other protocols or buses. @@ -29,10 +28,9 @@ and that there are various cases in practice where the detection of the bitrate or baudrate will not necessarily have the expected result. The precision of the estimated bitrate / baudrate will also depend on the -samplerate used to sample the respective probe. For good results it is +samplerate used to sample the respective channel. For good results it is recommended to use a logic analyzer samplerate that is much higher than -the expected bitrate/baudrate that might be used on the probe. +the expected bitrate/baudrate that might be used on the channel. ''' -from .pd import * - +from .pd import Decoder