X-Git-Url: https://sigrok.org/gitweb/?a=blobdiff_plain;f=configure.ac;h=56a73a836be73557d017b8b2bdf61989b2eb3031;hb=789840741cc680908754531a3fcb59d313276677;hp=c1c4aedce85a2bcf392b99d61199bdde8c7be75e;hpb=3086efdd73885820da142ce8c36053bbc3cf0e5f;p=libsigrok.git

diff --git a/configure.ac b/configure.ac
index c1c4aedc..56a73a83 100644
--- a/configure.ac
+++ b/configure.ac
@@ -144,6 +144,11 @@ AC_ARG_ENABLE(gmc-mh-1x-2x, AC_HELP_STRING([--enable-gmc-mh-1x-2x],
 	[HW_GMC_MH_1X_2X="$enableval"],
 	[HW_GMC_MH_1X_2X=$HW_ENABLED_DEFAULT])
 
+AC_ARG_ENABLE(hameg-hmo, AC_HELP_STRING([--enable-hameg-hmo],
+	[enable Hameg HMO support [default=yes]]),
+	[HW_HAMEG_HMO="$enableval"],
+	[HW_HAMEG_HMO=$HW_ENABLED_DEFAULT])
+
 AC_ARG_ENABLE(hantek-dso, AC_HELP_STRING([--enable-hantek-dso],
 	[enable Hantek DSO support [default=yes]]),
 	[HW_HANTEK_DSO="$enableval"],
@@ -264,8 +269,9 @@ PKG_CHECK_MODULES([libserialport], [libserialport >= 0.1.0],
 	SR_PKGLIBS="$SR_PKGLIBS libserialport"],
 	[have_libserialport="no"; HW_AGILENT_DMM="no"; HW_BRYMEN_DMM="no";
 	HW_CEM_DT_885X="no"; HW_CENTER_3XX="no"; HW_COLEAD_SLM="no";
-	HW_FLUKE_DMM="no"; HW_GMC_MH_1X_2X="no"; HW_LINK_MSO19="no"; HW_MIC_985XX="no";
-	HW_NORMA_DMM="no"; HW_OLS="no"; HW_RIGOL_DS1XX2="no";
+	HW_FLUKE_DMM="no"; HW_GMC_MH_1X_2X="no"; HW_HAMEG_HMO="no";
+	HW_LINK_MSO19="no"; HW_MIC_985XX="no";
+	HW_NORMA_DMM="no"; HW_OLS="no"; HW_RIGOL_DS="no";
 	HW_SERIAL_DMM="no"; HW_TELEINFO="no"; HW_TONDAJ_SL_814="no"])
 
 # Define HAVE_LIBSERIALPORT in config.h if we found libserialport.
@@ -334,21 +340,6 @@ PKG_CHECK_MODULES([check], [check >= 0.9.4],
 	LIBS="$LIBS $check_LIBS"], [have_check="no"])
 AM_CONDITIONAL(HAVE_CHECK, test x"$have_check" = "xyes")
 
-# The Rigol DS driver currently uses the Linux kernel usbtmc module
-# (though it is planned to rewrite the driver to be portable later).
-# Thus, it will be disabled for non-Linux builds for now.
-case "$host" in
-*linux*)
-	# Do nothing. Whether the driver is enabled is determined by the
-	# previous --enable-all-drivers/--disable-all-drivers and/or any
-	# --enable-rigol-ds/--disable-rigol-ds options.
-	;;
-*)
-	# Disable the driver for builds that don't target Linux.
-	HW_RIGOL_DS="no"
-	;;
-esac
-
 AC_SUBST(SR_PKGLIBS)
 
 # Now set AM_CONDITIONALs and AC_DEFINEs for the enabled/disabled drivers.
@@ -418,6 +409,11 @@ if test "x$HW_HANTEK_DSO" = "xyes"; then
 	AC_DEFINE(HAVE_HW_HANTEK_DSO, 1, [Hantek DSO support])
 fi
 
+AM_CONDITIONAL(HW_HAMEG_HMO, test x$HW_HAMEG_HMO = xyes)
+if test "x$HW_HAMEG_HMO" = "xyes"; then
+	AC_DEFINE(HAVE_HW_HAMEG_HMO, 1, [Hameg HMO support])
+fi
+
 AM_CONDITIONAL(HW_IKALOGIC_SCANALOGIC2, test x$HW_IKALOGIC_SCANALOGIC2 = xyes)
 if test "x$HW_IKALOGIC_SCANALOGIC2" = "xyes"; then
 	AC_DEFINE(HAVE_HW_IKALOGIC_SCANALOGIC2, 1, [IKALOGIC Scanalogic-2 support])
@@ -548,6 +544,7 @@ AC_CONFIG_FILES([Makefile version.h hardware/Makefile
 		 hardware/colead-slm/Makefile
 		 hardware/common/Makefile
 		 hardware/gmc-mh-1x-2x/Makefile
+		 hardware/hameg-hmo/Makefile
 		 hardware/ikalogic-scanalogic2/Makefile
 		 hardware/ikalogic-scanaplus/Makefile
 		 hardware/kecheng-kc-330b/Makefile
@@ -616,6 +613,7 @@ echo "  - demo............................ $HW_DEMO"
 echo "  - fluke-dmm....................... $HW_FLUKE_DMM"
 echo "  - fx2lafw......................... $HW_FX2LAFW"
 echo "  - gmc-mh-1x-2x.................... $HW_GMC_MH_1X_2X"
+echo "  - hameg-hmo....................... $HW_HAMEG_HMO"
 echo "  - hantek-dso...................... $HW_HANTEK_DSO"
 echo "  - ikalogic-scanalogic2............ $HW_IKALOGIC_SCANALOGIC2"
 echo "  - ikalogic-scanaplus.............. $HW_IKALOGIC_SCANAPLUS"