X-Git-Url: https://sigrok.org/gitweb/?a=blobdiff_plain;f=configure.ac;h=3fc1cdc44ad402a26babbe45ea0f8a4a3a2a5794;hb=1c183900d2ee1416a0281871928e4064797ee528;hp=42704ddee441f9fd6d952c890762b036accd3006;hpb=3ba7b61ab23ff61f112206601b8a57a5c5545ae3;p=libsigrok.git

diff --git a/configure.ac b/configure.ac
index 42704dde..3fc1cdc4 100644
--- a/configure.ac
+++ b/configure.ac
@@ -94,11 +94,21 @@ AC_ARG_ENABLE(alsa, AC_HELP_STRING([--enable-alsa],
 	[HW_ALSA="$enableval"],
 	[HW_ALSA=$HW_ENABLED_DEFAULT])
 
+AC_ARG_ENABLE(appa-55ii, AC_HELP_STRING([--enable-appa-55ii],
+	[enable APPA 55II support [default=yes]]),
+	[HW_APPA_55II="$enableval"],
+	[HW_APPA_55II=$HW_ENABLED_DEFAULT])
+
 AC_ARG_ENABLE(asix-sigma, AC_HELP_STRING([--enable-asix-sigma],
 	[enable ASIX SIGMA/SIGMA2 support [default=yes]]),
 	[HW_ASIX_SIGMA="$enableval"],
 	[HW_ASIX_SIGMA=$HW_ENABLED_DEFAULT])
 
+AC_ARG_ENABLE(atten-pps3xxx, AC_HELP_STRING([--enable-atten-pps3xxx],
+	[enable Atten PPS3xxx support [default=yes]]),
+	[HW_ATTEN_PPS3XXX="$enableval"],
+	[HW_ATTEN_PPS3XXX=$HW_ENABLED_DEFAULT])
+
 AC_ARG_ENABLE(brymen-dmm, AC_HELP_STRING([--enable-brymen-dmm],
 	[enable Brymen DMM support [default=yes]]),
 	[HW_BRYMEN_DMM="$enableval"],
@@ -144,6 +154,11 @@ AC_ARG_ENABLE(gmc-mh-1x-2x, AC_HELP_STRING([--enable-gmc-mh-1x-2x],
 	[HW_GMC_MH_1X_2X="$enableval"],
 	[HW_GMC_MH_1X_2X=$HW_ENABLED_DEFAULT])
 
+AC_ARG_ENABLE(hameg-hmo, AC_HELP_STRING([--enable-hameg-hmo],
+	[enable Hameg HMO support [default=yes]]),
+	[HW_HAMEG_HMO="$enableval"],
+	[HW_HAMEG_HMO=$HW_ENABLED_DEFAULT])
+
 AC_ARG_ENABLE(hantek-dso, AC_HELP_STRING([--enable-hantek-dso],
 	[enable Hantek DSO support [default=yes]]),
 	[HW_HANTEK_DSO="$enableval"],
@@ -237,6 +252,12 @@ AC_ARG_ENABLE(zeroplus-logic-cube,
 
 # Checks for libraries.
 
+case "$host" in
+*mingw*)
+	# We need to link against the Winsock2 library for SCPI over TCP.
+	LIBS="$LIBS -lws2_32";;
+esac
+
 # This variable collects the pkg-config names of all detected libs.
 # It is then used to construct the "Requires.private:" field in the
 # libsigrok.pc file.
@@ -262,10 +283,11 @@ PKG_CHECK_MODULES([libserialport], [libserialport >= 0.1.0],
 	[have_libserialport="yes"; CFLAGS="$CFLAGS $libserialport_CFLAGS";
 	LIBS="$LIBS $libserialport_LIBS";
 	SR_PKGLIBS="$SR_PKGLIBS libserialport"],
-	[have_libserialport="no"; HW_AGILENT_DMM="no"; HW_BRYMEN_DMM="no";
-	HW_CEM_DT_885X="no"; HW_CENTER_3XX="no"; HW_COLEAD_SLM="no";
-	HW_FLUKE_DMM="no"; HW_GMC_MH_1X_2X="no"; HW_LINK_MSO19="no"; HW_MIC_985XX="no";
-	HW_NORMA_DMM="no"; HW_OLS="no"; HW_RIGOL_DS="no";
+	[have_libserialport="no"; HW_AGILENT_DMM="no"; HW_APPA_55II="no";
+	HW_ATTEN_PPS3XXX="no"; HW_BRYMEN_DMM="no"; HW_CEM_DT_885X="no";
+	HW_CENTER_3XX="no"; HW_COLEAD_SLM="no"; HW_FLUKE_DMM="no";
+	HW_GMC_MH_1X_2X="no"; HW_HAMEG_HMO="no"; HW_LINK_MSO19="no";
+	HW_MIC_985XX="no"; HW_NORMA_DMM="no"; HW_OLS="no"; HW_RIGOL_DS="no";
 	HW_SERIAL_DMM="no"; HW_TELEINFO="no"; HW_TONDAJ_SL_814="no"])
 
 # Define HAVE_LIBSERIALPORT in config.h if we found libserialport.
@@ -288,7 +310,7 @@ case "$host" in
 		[Specifies whether we have a libusb.h header.])
 	;;
 *)
-	PKG_CHECK_MODULES([libusb], [libusb-1.0 >= 1.0.9],
+	PKG_CHECK_MODULES([libusb], [libusb-1.0 >= 1.0.16],
 		[have_libusb1_0="yes"; CFLAGS="$CFLAGS $libusb_CFLAGS";
 		LIBS="$LIBS $libusb_LIBS";
 		SR_PKGLIBS="$SR_PKGLIBS libusb-1.0"],
@@ -334,19 +356,12 @@ PKG_CHECK_MODULES([check], [check >= 0.9.4],
 	LIBS="$LIBS $check_LIBS"], [have_check="no"])
 AM_CONDITIONAL(HAVE_CHECK, test x"$have_check" = "xyes")
 
-# The Rigol DS driver currently uses the Linux kernel usbtmc module
-# (though it is planned to rewrite the driver to be portable later).
-# Thus, it will be disabled for non-Linux builds for now.
+# The OLS driver uses serial port file descriptors directly, and therefore
+# will not currently work on Windows.
 case "$host" in
-*linux*)
-	# Do nothing. Whether the driver is enabled is determined by the
-	# previous --enable-all-drivers/--disable-all-drivers and/or any
-	# --enable-rigol-ds/--disable-rigol-ds options.
-	;;
-*)
-	# Disable the driver for builds that don't target Linux.
-	HW_RIGOL_DS="no"
-	;;
+*mingw*)
+       HW_OLS="no"
+       ;;
 esac
 
 AC_SUBST(SR_PKGLIBS)
@@ -363,11 +378,21 @@ if test "x$HW_ALSA" = "xyes"; then
 	AC_DEFINE(HAVE_HW_ALSA, 1, [ALSA driver support])
 fi
 
+AM_CONDITIONAL(HW_APPA_55II, test x$HW_APPA_55II = xyes)
+if test "x$HW_APPA_55II" = "xyes"; then
+	AC_DEFINE(HAVE_HW_APPA_55II, 1, [APPA 55II support])
+fi
+
 AM_CONDITIONAL(HW_ASIX_SIGMA, test x$HW_ASIX_SIGMA = xyes)
 if test "x$HW_ASIX_SIGMA" = "xyes"; then
 	AC_DEFINE(HAVE_HW_ASIX_SIGMA, 1, [ASIX SIGMA/SIGMA2 support])
 fi
 
+AM_CONDITIONAL(HW_ATTEN_PPS3XXX, test x$HW_ATTEN_PPS3XXX = xyes)
+if test "x$HW_ATTEN_PPS3XXX" = "xyes"; then
+       AC_DEFINE(HAVE_HW_ATTEN_PPS3XXX, 1, [Atten PPS3xxx support])
+fi
+
 AM_CONDITIONAL(HW_BRYMEN_DMM, test x$HW_BRYMEN_DMM = xyes)
 if test "x$HW_BRYMEN_DMM" = "xyes"; then
 	AC_DEFINE(HAVE_HW_BRYMEN_DMM, 1, [Brymen DMM support])
@@ -418,6 +443,11 @@ if test "x$HW_HANTEK_DSO" = "xyes"; then
 	AC_DEFINE(HAVE_HW_HANTEK_DSO, 1, [Hantek DSO support])
 fi
 
+AM_CONDITIONAL(HW_HAMEG_HMO, test x$HW_HAMEG_HMO = xyes)
+if test "x$HW_HAMEG_HMO" = "xyes"; then
+	AC_DEFINE(HAVE_HW_HAMEG_HMO, 1, [Hameg HMO support])
+fi
+
 AM_CONDITIONAL(HW_IKALOGIC_SCANALOGIC2, test x$HW_IKALOGIC_SCANALOGIC2 = xyes)
 if test "x$HW_IKALOGIC_SCANALOGIC2" = "xyes"; then
 	AC_DEFINE(HAVE_HW_IKALOGIC_SCANALOGIC2, 1, [IKALOGIC Scanalogic-2 support])
@@ -540,7 +570,9 @@ AC_SUBST(SR_PACKAGE_VERSION)
 AC_CONFIG_FILES([Makefile version.h hardware/Makefile
 		 hardware/agilent-dmm/Makefile
 		 hardware/alsa/Makefile
+		 hardware/appa-55ii/Makefile
 		 hardware/asix-sigma/Makefile
+		 hardware/atten-pps3xxx/Makefile
 		 hardware/brymen-dmm/Makefile
 		 hardware/cem-dt-885x/Makefile
 		 hardware/center-3xx/Makefile
@@ -548,6 +580,7 @@ AC_CONFIG_FILES([Makefile version.h hardware/Makefile
 		 hardware/colead-slm/Makefile
 		 hardware/common/Makefile
 		 hardware/gmc-mh-1x-2x/Makefile
+		 hardware/hameg-hmo/Makefile
 		 hardware/ikalogic-scanalogic2/Makefile
 		 hardware/ikalogic-scanaplus/Makefile
 		 hardware/kecheng-kc-330b/Makefile
@@ -593,7 +626,7 @@ echo "Detected libraries:"
 echo
 
 # Note: This only works for libs with pkg-config integration.
-for lib in "glib-2.0 >= 2.32.0" "libzip >= 0.10" "libserialport >= 0.1.0" "libusb-1.0 >= 1.0.9" "libftdi >= 0.16" "libudev >= 151" "alsa >= 1.0" "check >= 0.9.4"; do
+for lib in "glib-2.0 >= 2.32.0" "libzip >= 0.10" "libserialport >= 0.1.0" "libusb-1.0 >= 1.0.16" "libftdi >= 0.16" "libudev >= 151" "alsa >= 1.0" "check >= 0.9.4"; do
 	if `$PKG_CONFIG --exists $lib`; then
 		ver=`$PKG_CONFIG --modversion $lib`
 		answer="yes ($ver)"
@@ -606,7 +639,9 @@ done
 echo -e "\nEnabled hardware drivers:\n"
 echo "  - agilent-dmm..................... $HW_AGILENT_DMM"
 echo "  - alsa............................ $HW_ALSA"
+echo "  - appa-55ii....................... $HW_APPA_55II"
 echo "  - asix-sigma...................... $HW_ASIX_SIGMA"
+echo "  - atten-pps3xxx................... $HW_ATTEN_PPS3XXX"
 echo "  - brymen-dmm...................... $HW_BRYMEN_DMM"
 echo "  - cem-dt-885x..................... $HW_CEM_DT_885X"
 echo "  - center-3xx...................... $HW_CENTER_3XX"
@@ -616,6 +651,7 @@ echo "  - demo............................ $HW_DEMO"
 echo "  - fluke-dmm....................... $HW_FLUKE_DMM"
 echo "  - fx2lafw......................... $HW_FX2LAFW"
 echo "  - gmc-mh-1x-2x.................... $HW_GMC_MH_1X_2X"
+echo "  - hameg-hmo....................... $HW_HAMEG_HMO"
 echo "  - hantek-dso...................... $HW_HANTEK_DSO"
 echo "  - ikalogic-scanalogic2............ $HW_IKALOGIC_SCANALOGIC2"
 echo "  - ikalogic-scanaplus.............. $HW_IKALOGIC_SCANAPLUS"