X-Git-Url: https://sigrok.org/gitweb/?a=blobdiff_plain;f=README.devices;h=ecd2ffc0670e029a233f3a55b3adb81ebc5bcaea;hb=5fa12e93e3f1cf2825591e76e1f63d974fec9cc2;hp=ae3ac5098a38b9312ca1a6195b1ee6cd6efee6db;hpb=c77ed446f2c08e2906883023c85feafa19a0ec10;p=libsigrok.git

diff --git a/README.devices b/README.devices
old mode 100755
new mode 100644
index ae3ac509..ecd2ffc0
--- a/README.devices
+++ b/README.devices
@@ -42,26 +42,36 @@ The following drivers/devices require a firmware upload upon connection:
    These can be extracted from the vendor's Windows drivers using a tool
    from our 'sigrok-util' repository/project.
 
- - nexus-osciprime: The Nexus Computing OsciPrime PC oscilloscope needs
-   firmware files. These are available from the vendor website.
+ - saleae-logic16: The Saleae Logic16 needs a firmware file for the
+   Cypress FX2 chip in the device, as well as two FPGA bitstream files.
+   These can be extracted from the vendor's Linux application using a tool
+   from our 'sigrok-util' repository/project.
 
 The following drivers/devices do not need any firmware upload:
 
  - agilent-dmm
  - alsa
  - brymen-dmm
+ - cem-dt-885x
+ - center-3xx
  - chronovu-la8
  - colead-slm
  - demo
  - fluke-dmm
+ - ikalogic-scanalogic2
+ - ikalogic-scanaplus
+ - kecheng-kc-330b
  - lascar-el-usb
  - link-mso19
  - mic-985xx
+ - norma-dmm
  - openbench-logic-sniffer
  - rigol-ds1xx2
  - serial-dmm
+ - teleinfo
  - tondaj-sl-814
  - uni-t-dmm
+ - uni-t-ut32x
  - victor-dmm
  - zeroplus-logic-cube
 
@@ -84,13 +94,16 @@ The following drivers/devices require a serial port specification:
 
  - agilent-dmm
  - brymen-dmm
+ - cem-dt-885x
+ - center-3xx
  - colead-slm
  - fluke-dmm
  - link-mso19
  - mic-985xx
- - nexus-osciprime
+ - norma-dmm
  - openbench-logic-sniffer
  - serial-dmm
+ - teleinfo
  - tondaj-sl-814
 
 The following drivers/devices do not require a serial port specification:
@@ -101,9 +114,14 @@ The following drivers/devices do not require a serial port specification:
  - demo
  - fx2lafw
  - hantek-dso
+ - ikalogic-scanalogic2
+ - ikalogic-scanaplus
+ - kecheng-kc-330b
  - lascar-el-usb
  - rigol-ds1xx2
+ - saleae-logic16
  - uni-t-dmm
+ - uni-t-ut32x
  - victor-dmm
  - zeroplus-logic-cube
 
@@ -215,7 +233,7 @@ UNI-T UT-D04 cable issue on Linux
 ---------------------------------
 
 The UNI-T UT-D04 cable with Hoitek HE2325U (or WCH CH9325) chip seems to have
-a very specific problem on Linux. Apparently it requires a to be put into
+a very specific problem on Linux. Apparently it requires to be put into
 suspend (and woken up again) before it is usable. This seems to be a
 Linux-only issue, Windows is not affected by this since apparently the
 Windows kernel does this for every USB device, always.
@@ -234,6 +252,28 @@ See also: http://erste.de/UT61/index.html
   done
 
 
+Enabling multimeter / data logger measurement output
+----------------------------------------------------
+
+Some multimeters or data loggers will not start outputting measurement data
+unless a certain action has been performed by the user beforehand. This is
+usually mentioned in the vendor manual of the respective device, but here's
+a short list for convenience:
+
+ - Digitek DT4000ZC: Briefly press the "RS232" button.
+ - PCE PCE-DM32: Briefly press the "RS232" button.
+ - RadioShack 22-812: Press and hold "SELECT" and "RANGE" together.
+ - TekPower TP4000ZC: Briefly press the "RS232" button.
+ - UNI-T UT61D: Press the "REL/RS232/USB" button for roughly 1 second.
+ - UNI-T UT325: Briefly press the "SEND" button (as per manual). However, it
+   appears that in practice you don't have to press the button (at least on
+   some versions of the device), simply connect the device via USB.
+ - V&A VA18B: Keep the "Hz/DUTY" key pressed while powering on the device.
+ - Victor 70C: Press the "REL/RS232" button for roughly 1 second.
+ - Victor 86C: Press the "REL/RS232" button for roughly 1 second.
+ - Voltcraft VC-830: Press the "REL/PC" button for roughly 2 seconds.
+
+
 ALSA driver
 -----------