X-Git-Url: https://sigrok.org/gitweb/?a=blobdiff_plain;f=README.devices;h=554805a948c2e554913c2a9eabdeeca9919c3252;hb=7bcbbfae3e0262ed25693adb7aa1f0b864722827;hp=136db62c52e77294073a7a877c1301856bd8be7a;hpb=fadd07072b283f7040036a1050e23e7af43f1324;p=libsigrok.git

diff --git a/README.devices b/README.devices
index 136db62c..554805a9 100644
--- a/README.devices
+++ b/README.devices
@@ -52,10 +52,11 @@ The following drivers/devices do not need any firmware upload:
  - agilent-dmm
  - alsa
  - appa-55ii
+ - brymen-bm86x
  - brymen-dmm
  - cem-dt-885x
  - center-3xx (including all subdrivers)
- - chronovu-la8
+ - chronovu-la
  - colead-slm
  - demo
  - fluke-dmm
@@ -117,7 +118,8 @@ The following drivers/devices do not require a serial port specification:
 
  - alsa
  - asix-sigma
- - chronovu-la8
+ - brymen-bm86x
+ - chronovu-la
  - demo
  - fx2lafw
  - hantek-dso
@@ -338,20 +340,19 @@ system). Thus, this driver can currently only compile and work on Linux.
 We plan to fix this though, so that it'll work on all other OSes, too.
 
 
-ChronoVu LA8 USB VID/PIDs
--------------------------
+ChronoVu LA8/LA16 USB VID/PIDs
+------------------------------
 
-The ChronoVu LA8 logic analyzer is available in two revisions. Previously,
-the LA8 shipped with a USB VID/PID of 0403:6001, which is the standard ID
+The ChronoVu LA8/LA16 logic analyzer is available in two revisions. Previously,
+the device shipped with a USB VID/PID of 0403:6001, which is the standard ID
 for FTDI FT232 USB chips.
 
-Since this made it hard to distinguish the LA8 from any other device
+Since this made it hard to distinguish the LA8/LA16 from any other device
 with this FTDI chip connected to the PC, the vendor later shipped the
-LA8 with a USB VID/PID of 0403:8867.
+device with a USB VID/PID of 0403:8867.
 
-The 'chronovu-la8' driver in libsigrok supports both VID/PID pairs and
-automatically finds devices with either VID/PID pair. However, currently
-the driver will assume any device with VID/PID 0403:6001 is a ChronoVu LA8.
+The 'chronovu-la' driver in libsigrok supports both VID/PID pairs and
+automatically finds devices with either VID/PID pair.
 
 
 OLS