X-Git-Url: https://sigrok.org/gitweb/?a=blobdiff_plain;f=README.devices;h=30f8e474d7eb2e9130f9f1f3fb9fb3a8b3d07597;hb=ecaa89af0e01f9c3f585e82eb849bf616bff22cf;hp=3591fe9c9722dbeda9608e1c2b22ee21b9e6369c;hpb=c90beca7801b16e46ffd4d74c9dd21b02a045ab5;p=libsigrok.git

diff --git a/README.devices b/README.devices
index 3591fe9c..30f8e474 100644
--- a/README.devices
+++ b/README.devices
@@ -10,7 +10,7 @@ Firmware
 --------
 
 Some devices supported by libsigrok need a firmware to be uploaded every time
-the device is connected to the PC (usually via USB), before it can be used. 
+the device is connected to the PC (usually via USB), before it can be used.
 
 The default location where libsigrok expects the firmware files is:
 
@@ -52,6 +52,7 @@ The following drivers/devices do not need any firmware upload:
  - agilent-dmm
  - alsa
  - appa-55ii
+ - brymen-bm86x
  - brymen-dmm
  - cem-dt-885x
  - center-3xx (including all subdrivers)
@@ -117,6 +118,7 @@ The following drivers/devices do not require a serial port specification:
 
  - alsa
  - asix-sigma
+ - brymen-bm86x
  - chronovu-la8
  - demo
  - fx2lafw
@@ -288,10 +290,16 @@ a short list for convenience:
    interface panel on top.
  - Digitek DT4000ZC: Briefly press the "RS232" button.
  - Gossen Metrawatt Metrahit 1x/2x devices, driver gmc-mh-1x-2x-rs232:
-   Power on the device with the "DATA" button pressed. Additionally Metrahit
-   2x devices must be configured for the respective interface type.
+   - Power on the device with the "DATA" button pressed.
+   - Metrahit 2x devices must be configured for the respective interface type.
  - Gossen Metrawatt Metrahit 2x devices, driver gmc-mh-2x-bd232:
-   The device must be configured for the respective interface type.
+   - 'BD232' interface:
+      The multimeter must be configured for the respective interface type.
+   - 'SI232-II' interface ("PC Mode"):
+      The multimeter must be configured for interface type 'BD232' (all),
+      'SI232 online' (28-29S) or 'SI232 store' (22-26x). The interface must
+      be configured to the same baud rate as the host (default 9600).
+      Multimeter and interface must be configured to the same address.
  - Norma DM950: If the interface doesn't work (e.g. USB-RS232 converter), power
    on the device with "FUNC" pressed (to power the interface from the DMM).
  - PCE PCE-DM32: Briefly press the "RS232" button.