X-Git-Url: https://sigrok.org/gitweb/?a=blobdiff_plain;f=README;h=556ab3f492b3c5a32ed6ace7e76808404b2de188;hb=aeff7fa28622367115c3c8bdbd965c07dd536458;hp=e25f227290885a27fc72386f9a3490909ce377c4;hpb=e21e846330070e102b24e08605b76b362020f500;p=libsigrok.git diff --git a/README b/README index e25f2272..556ab3f4 100644 --- a/README +++ b/README @@ -3,12 +3,25 @@ README ------------------------------------------------------------------------------- The sigrok project aims at creating a portable, cross-platform, -Free/Libre/Open-Source logic analyzer software that supports various -logic analyzer hardware products. +Free/Libre/Open-Source signal analysis software suite that supports various +device types (such as logic analyzers, oscilloscopes, multimeters, and more). libsigrok is a shared library written in C which provides the basic API -for talking to logic analyzer hardware and reading/writing the acquired data -into various input/output file formats. +for talking to hardware and reading/writing the acquired data into various +input/output file formats. + + +Status +------ + +libsigrok is in a usable state and has had official tarball releases. + +While the API can change from release to release, this will always be +properly documented and reflected in the package version number and +in the shared library / libtool / .so-file version numbers. + +However, there are _NO_ guarantees at all for stable APIs in git snapshots! +Distro packagers should only use released tarballs (no git snapshots). Requirements @@ -21,11 +34,13 @@ Requirements - automake >= 1.11 - libtool - pkg-config >= 0.22 - - libglib >= 2.28.0 - - libusb >= 1.0.5 (for most logic analyzer hardware) - - libzip >= 0.8 - - libftdi >= 0.16 (for some logic analyzer hardware) - - libudev >= 151 (for some logic analyzer hardware) + - libglib >= 2.32.0 + - libzip >= 0.10 + - libserialport >= 0.1.0 (optional, used by some drivers) + - librevisa >= 0.0.20130812 (optional, used by some drivers) + - libusb-1.0 >= 1.0.16 (optional, used by some drivers) + - libftdi >= 0.16 (optional, used by some drivers) + - check >= 0.9.4 (optional, only needed to run unit tests) Building and installing @@ -33,8 +48,8 @@ Building and installing In order to get the libsigrok source code and build it, run: - $ git clone git://sigrok.git.sourceforge.net/gitroot/sigrok/sigrok - $ cd sigrok/libsigrok + $ git clone git://sigrok.org/libsigrok + $ cd libsigrok $ ./autogen.sh $ ./configure $ make @@ -43,29 +58,36 @@ For installing libsigrok: $ make install -Please see the following wiki pages for more detailed instructions: +See INSTALL or the following wiki page for more (OS-specific) instructions: + + http://sigrok.org/wiki/Building + + +Device-specific issues +---------------------- - http://sigrok.org/wiki/Linux - http://sigrok.org/wiki/Mac_OS_X - http://sigrok.org/wiki/Windows - http://sigrok.org/wiki/FreeBSD +Please check README.devices for some notes and hints about device- or +driver-specific issues to be aware of. Firmware -------- Some devices supported by libsigrok need a firmware to be uploaded before the -device can be used. +device can be used. See README.devices for details. -The default location where libsigrok expects the firmware files is: - $prefix/share/sigrok-firmware +Copyright and license +--------------------- -($prefix is usually /usr/local or /usr, depending on your ./configure options) +libsigrok is licensed under the terms of the GNU General Public License +(GPL), version 3 or later. -For further information see: +While some individual source code files are licensed under the GPLv2+, and +some files are licensed under the GPLv3+, this doesn't change the fact that +the library as a whole is licensed under the terms of the GPLv3+. - http://sigrok.org/wiki/Firmware +Please see the individual source files for the full list of copyright holders. Mailing lists @@ -86,5 +108,5 @@ You can find the sigrok developers in the #sigrok IRC channel on Freenode. Website ------- -http://sigrok.org + http://sigrok.org/wiki/Libsigrok