X-Git-Url: https://sigrok.org/gitweb/?a=blobdiff_plain;ds=sidebyside;f=src%2Fhardware%2Fopenbench-logic-sniffer%2Fapi.c;h=fc0d9ebdb3afe6813e7e3e26fed2258dc449e37d;hb=4fc4b8e7aa63d80bc2d2a032d0126d212d5d46ec;hp=ac69250cf19ecc3d36e72acdaa8bee65a01025aa;hpb=584560f142e1b17b9f4ef9069bd3724f2f77e750;p=libsigrok.git
diff --git a/src/hardware/openbench-logic-sniffer/api.c b/src/hardware/openbench-logic-sniffer/api.c
index ac69250c..fc0d9ebd 100644
--- a/src/hardware/openbench-logic-sniffer/api.c
+++ b/src/hardware/openbench-logic-sniffer/api.c
@@ -17,26 +17,29 @@
* along with this program. If not, see .
*/
+#include
#include "protocol.h"
-#include
#define SERIALCOMM "115200/8n1"
-static const uint32_t hwopts[] = {
+static const uint32_t scanopts[] = {
SR_CONF_CONN,
SR_CONF_SERIALCOMM,
};
-static const uint32_t hwcaps[] = {
+static const uint32_t drvopts[] = {
SR_CONF_LOGIC_ANALYZER,
- SR_CONF_SAMPLERATE,
- SR_CONF_TRIGGER_MATCH,
- SR_CONF_CAPTURE_RATIO,
- SR_CONF_LIMIT_SAMPLES,
- SR_CONF_EXTERNAL_CLOCK,
- SR_CONF_PATTERN_MODE,
- SR_CONF_SWAP,
- SR_CONF_RLE,
+};
+
+static const uint32_t devopts[] = {
+ SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
+ SR_CONF_SAMPLERATE | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
+ SR_CONF_TRIGGER_MATCH | SR_CONF_LIST,
+ SR_CONF_CAPTURE_RATIO | SR_CONF_GET | SR_CONF_SET,
+ SR_CONF_EXTERNAL_CLOCK | SR_CONF_SET,
+ SR_CONF_PATTERN_MODE | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
+ SR_CONF_SWAP | SR_CONF_SET,
+ SR_CONF_RLE | SR_CONF_GET | SR_CONF_SET,
};
static const int32_t trigger_matches[] = {
@@ -67,11 +70,10 @@ static const char *patterns[] = {
};
/* Channels are numbered 0-31 (on the PCB silkscreen). */
-SR_PRIV const char *ols_channel_names[NUM_CHANNELS + 1] = {
+SR_PRIV const char *ols_channel_names[] = {
"0", "1", "2", "3", "4", "5", "6", "7", "8", "9", "10", "11", "12",
"13", "14", "15", "16", "17", "18", "19", "20", "21", "22", "23",
"24", "25", "26", "27", "28", "29", "30", "31",
- NULL,
};
/* Default supported samplerates, can be overridden by device metadata. */
@@ -81,32 +83,19 @@ static const uint64_t samplerates[] = {
SR_HZ(1),
};
-SR_PRIV struct sr_dev_driver ols_driver_info;
-static struct sr_dev_driver *di = &ols_driver_info;
+#define RESPONSE_DELAY_US (10 * 1000)
-static int init(struct sr_context *sr_ctx)
-{
- return std_init(sr_ctx, di, LOG_PREFIX);
-}
-
-static GSList *scan(GSList *options)
+static GSList *scan(struct sr_dev_driver *di, GSList *options)
{
struct sr_config *src;
struct sr_dev_inst *sdi;
- struct drv_context *drvc;
- struct dev_context *devc;
- struct sr_channel *ch;
struct sr_serial_dev_inst *serial;
- GPollFD probefd;
- GSList *l, *devices;
- int ret, i;
+ GSList *l;
+ int ret;
+ unsigned int i;
const char *conn, *serialcomm;
char buf[8];
- drvc = di->priv;
-
- devices = NULL;
-
conn = serialcomm = NULL;
for (l = options; l; l = l->next) {
src = l->data;
@@ -122,11 +111,10 @@ static GSList *scan(GSList *options)
if (!conn)
return NULL;
- if (serialcomm == NULL)
+ if (!serialcomm)
serialcomm = SERIALCOMM;
- if (!(serial = sr_serial_dev_inst_new(conn, serialcomm)))
- return NULL;
+ serial = sr_serial_dev_inst_new(conn, serialcomm);
/* The discovery procedure is like this: first send the Reset
* command (0x00) 5 times, since the device could be anywhere
@@ -135,60 +123,57 @@ static GSList *scan(GSList *options)
* have a match.
*/
sr_info("Probing %s.", conn);
- if (serial_open(serial, SERIAL_RDWR | SERIAL_NONBLOCK) != SR_OK)
+ if (serial_open(serial, SERIAL_RDWR) != SR_OK)
return NULL;
- ret = SR_OK;
- for (i = 0; i < 5; i++) {
- if ((ret = send_shortcommand(serial, CMD_RESET)) != SR_OK) {
- sr_err("Port %s is not writable.", conn);
- break;
- }
- }
- if (ret != SR_OK) {
+ if (ols_send_reset(serial) != SR_OK) {
serial_close(serial);
sr_err("Could not use port %s. Quitting.", conn);
return NULL;
}
send_shortcommand(serial, CMD_ID);
- /* Wait 10ms for a response. */
- g_usleep(10000);
-
- sp_get_port_handle(serial->data, &probefd.fd);
- probefd.events = G_IO_IN;
- g_poll(&probefd, 1, 1);
+ g_usleep(RESPONSE_DELAY_US);
- if (probefd.revents != G_IO_IN)
+ if (sp_input_waiting(serial->data) == 0) {
+ sr_dbg("Didn't get any reply.");
return NULL;
- if (serial_read_blocking(serial, buf, 4) != 4)
+ }
+
+ ret = serial_read_blocking(serial, buf, 4, serial_timeout(serial, 4));
+ if (ret != 4) {
+ sr_err("Invalid reply (expected 4 bytes, got %d).", ret);
return NULL;
- if (strncmp(buf, "1SLO", 4) && strncmp(buf, "1ALS", 4))
+ }
+
+ if (strncmp(buf, "1SLO", 4) && strncmp(buf, "1ALS", 4)) {
+ sr_err("Invalid reply (expected '1SLO' or '1ALS', got "
+ "'%c%c%c%c').", buf[0], buf[1], buf[2], buf[3]);
return NULL;
+ }
/* Definitely using the OLS protocol, check if it supports
* the metadata command.
*/
send_shortcommand(serial, CMD_METADATA);
- if (g_poll(&probefd, 1, 10) > 0) {
+
+ g_usleep(RESPONSE_DELAY_US);
+
+ if (sp_input_waiting(serial->data) != 0) {
/* Got metadata. */
sdi = get_metadata(serial);
- sdi->index = 0;
- devc = sdi->priv;
} else {
/* Not an OLS -- some other board that uses the sump protocol. */
sr_info("Device does not support metadata.");
- sdi = sr_dev_inst_new(0, SR_ST_INACTIVE,
- "Sump", "Logic Analyzer", "v1.0");
- sdi->driver = di;
- for (i = 0; i < 32; i++) {
- if (!(ch = sr_channel_new(i, SR_CHANNEL_LOGIC, TRUE,
- ols_channel_names[i])))
- return 0;
- sdi->channels = g_slist_append(sdi->channels, ch);
- }
- devc = ols_dev_new();
- sdi->priv = devc;
+ sdi = g_malloc0(sizeof(struct sr_dev_inst));
+ sdi->status = SR_ST_INACTIVE;
+ sdi->vendor = g_strdup("Sump");
+ sdi->model = g_strdup("Logic Analyzer");
+ sdi->version = g_strdup("v1.0");
+ for (i = 0; i < ARRAY_SIZE(ols_channel_names); i++)
+ sr_channel_new(sdi, i, SR_CHANNEL_LOGIC, TRUE,
+ ols_channel_names[i]);
+ sdi->priv = ols_dev_new();
}
/* Configure samplerate and divider. */
if (ols_set_samplerate(sdi, DEFAULT_SAMPLERATE) != SR_OK)
@@ -197,26 +182,13 @@ static GSList *scan(GSList *options)
sdi->inst_type = SR_INST_SERIAL;
sdi->conn = serial;
- drvc->instances = g_slist_append(drvc->instances, sdi);
- devices = g_slist_append(devices, sdi);
-
serial_close(serial);
- return devices;
-}
-
-static GSList *dev_list(void)
-{
- return ((struct drv_context *)(di->priv))->instances;
+ return std_scan_complete(di, g_slist_append(NULL, sdi));
}
-static int cleanup(void)
-{
- return std_dev_clear(di, NULL);
-}
-
-static int config_get(uint32_t key, GVariant **data, const struct sr_dev_inst *sdi,
- const struct sr_channel_group *cg)
+static int config_get(uint32_t key, GVariant **data,
+ const struct sr_dev_inst *sdi, const struct sr_channel_group *cg)
{
struct dev_context *devc;
@@ -226,6 +198,7 @@ static int config_get(uint32_t key, GVariant **data, const struct sr_dev_inst *s
return SR_ERR_ARG;
devc = sdi->priv;
+
switch (key) {
case SR_CONF_SAMPLERATE:
*data = g_variant_new_uint64(devc->cur_samplerate);
@@ -254,20 +227,16 @@ static int config_get(uint32_t key, GVariant **data, const struct sr_dev_inst *s
return SR_OK;
}
-static int config_set(uint32_t key, GVariant *data, const struct sr_dev_inst *sdi,
- const struct sr_channel_group *cg)
+static int config_set(uint32_t key, GVariant *data,
+ const struct sr_dev_inst *sdi, const struct sr_channel_group *cg)
{
struct dev_context *devc;
uint16_t flag;
uint64_t tmp_u64;
- int ret;
const char *stropt;
(void)cg;
- if (sdi->status != SR_ST_ACTIVE)
- return SR_ERR_DEV_CLOSED;
-
devc = sdi->priv;
switch (key) {
@@ -275,22 +244,15 @@ static int config_set(uint32_t key, GVariant *data, const struct sr_dev_inst *sd
tmp_u64 = g_variant_get_uint64(data);
if (tmp_u64 < samplerates[0] || tmp_u64 > samplerates[1])
return SR_ERR_SAMPLERATE;
- ret = ols_set_samplerate(sdi, g_variant_get_uint64(data));
- break;
+ return ols_set_samplerate(sdi, g_variant_get_uint64(data));
case SR_CONF_LIMIT_SAMPLES:
tmp_u64 = g_variant_get_uint64(data);
if (tmp_u64 < MIN_NUM_SAMPLES)
return SR_ERR;
devc->limit_samples = tmp_u64;
- ret = SR_OK;
break;
case SR_CONF_CAPTURE_RATIO:
devc->capture_ratio = g_variant_get_uint64(data);
- if (devc->capture_ratio < 0 || devc->capture_ratio > 100) {
- devc->capture_ratio = 0;
- ret = SR_ERR;
- } else
- ret = SR_OK;
break;
case SR_CONF_EXTERNAL_CLOCK:
if (g_variant_get_boolean(data)) {
@@ -300,28 +262,24 @@ static int config_set(uint32_t key, GVariant *data, const struct sr_dev_inst *sd
sr_info("Disabled external clock.");
devc->flag_reg &= ~FLAG_CLOCK_EXTERNAL;
}
- ret = SR_OK;
break;
case SR_CONF_PATTERN_MODE:
stropt = g_variant_get_string(data, NULL);
- ret = SR_OK;
- flag = 0xffff;
if (!strcmp(stropt, STR_PATTERN_NONE)) {
sr_info("Disabling test modes.");
flag = 0x0000;
- }else if (!strcmp(stropt, STR_PATTERN_INTERNAL)) {
+ } else if (!strcmp(stropt, STR_PATTERN_INTERNAL)) {
sr_info("Enabling internal test mode.");
flag = FLAG_INTERNAL_TEST_MODE;
} else if (!strcmp(stropt, STR_PATTERN_EXTERNAL)) {
sr_info("Enabling external test mode.");
flag = FLAG_EXTERNAL_TEST_MODE;
} else {
- ret = SR_ERR;
- }
- if (flag != 0xffff) {
- devc->flag_reg &= ~(FLAG_INTERNAL_TEST_MODE | FLAG_EXTERNAL_TEST_MODE);
- devc->flag_reg |= flag;
+ return SR_ERR;
}
+ devc->flag_reg &= ~FLAG_INTERNAL_TEST_MODE;
+ devc->flag_reg &= ~FLAG_EXTERNAL_TEST_MODE;
+ devc->flag_reg |= flag;
break;
case SR_CONF_SWAP:
if (g_variant_get_boolean(data)) {
@@ -331,9 +289,7 @@ static int config_set(uint32_t key, GVariant *data, const struct sr_dev_inst *sd
sr_info("Disabling channel swapping.");
devc->flag_reg &= ~FLAG_SWAP_CHANNELS;
}
- ret = SR_OK;
break;
-
case SR_CONF_RLE:
if (g_variant_get_boolean(data)) {
sr_info("Enabling RLE.");
@@ -342,48 +298,32 @@ static int config_set(uint32_t key, GVariant *data, const struct sr_dev_inst *sd
sr_info("Disabling RLE.");
devc->flag_reg &= ~FLAG_RLE;
}
- ret = SR_OK;
break;
default:
- ret = SR_ERR_NA;
+ return SR_ERR_NA;
}
- return ret;
+ return SR_OK;
}
-static int config_list(uint32_t key, GVariant **data, const struct sr_dev_inst *sdi,
- const struct sr_channel_group *cg)
+static int config_list(uint32_t key, GVariant **data,
+ const struct sr_dev_inst *sdi, const struct sr_channel_group *cg)
{
struct dev_context *devc;
- GVariant *gvar, *grange[2];
- GVariantBuilder gvb;
int num_ols_changrp, i;
- (void)cg;
-
switch (key) {
case SR_CONF_SCAN_OPTIONS:
- *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
- hwopts, ARRAY_SIZE(hwopts), sizeof(uint32_t));
- break;
case SR_CONF_DEVICE_OPTIONS:
- *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
- hwcaps, ARRAY_SIZE(hwcaps), sizeof(uint32_t));
- break;
+ return STD_CONFIG_LIST(key, data, sdi, cg, scanopts, drvopts, devopts);
case SR_CONF_SAMPLERATE:
- g_variant_builder_init(&gvb, G_VARIANT_TYPE("a{sv}"));
- gvar = g_variant_new_fixed_array(G_VARIANT_TYPE("t"), samplerates,
- ARRAY_SIZE(samplerates), sizeof(uint64_t));
- g_variant_builder_add(&gvb, "{sv}", "samplerate-steps", gvar);
- *data = g_variant_builder_end(&gvb);
+ *data = std_gvar_samplerates_steps(ARRAY_AND_SIZE(samplerates));
break;
case SR_CONF_TRIGGER_MATCH:
- *data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32,
- trigger_matches, ARRAY_SIZE(trigger_matches),
- sizeof(int32_t));
+ *data = std_gvar_array_i32(ARRAY_AND_SIZE(trigger_matches));
break;
case SR_CONF_PATTERN_MODE:
- *data = g_variant_new_strv(patterns, ARRAY_SIZE(patterns));
+ *data = g_variant_new_strv(ARRAY_AND_SIZE(patterns));
break;
case SR_CONF_LIMIT_SAMPLES:
if (!sdi)
@@ -404,12 +344,9 @@ static int config_list(uint32_t key, GVariant **data, const struct sr_dev_inst *
if (devc->channel_mask & (0xff << (i * 8)))
num_ols_changrp++;
}
- grange[0] = g_variant_new_uint64(MIN_NUM_SAMPLES);
- if (num_ols_changrp)
- grange[1] = g_variant_new_uint64(devc->max_samples / num_ols_changrp);
- else
- grange[1] = g_variant_new_uint64(MIN_NUM_SAMPLES);
- *data = g_variant_new_tuple(grange, 2);
+
+ *data = std_gvar_tuple_u64(MIN_NUM_SAMPLES,
+ (num_ols_changrp) ? devc->max_samples / num_ols_changrp : MIN_NUM_SAMPLES);
break;
default:
return SR_ERR_NA;
@@ -455,8 +392,7 @@ static int set_trigger(const struct sr_dev_inst *sdi, int stage)
return SR_OK;
}
-static int dev_acquisition_start(const struct sr_dev_inst *sdi,
- void *cb_data)
+static int dev_acquisition_start(const struct sr_dev_inst *sdi)
{
struct dev_context *devc;
struct sr_serial_dev_inst *serial;
@@ -465,9 +401,6 @@ static int dev_acquisition_start(const struct sr_dev_inst *sdi,
int num_ols_changrp;
int ret, i;
- if (sdi->status != SR_ST_ACTIVE)
- return SR_ERR_DEV_CLOSED;
-
devc = sdi->priv;
serial = sdi->conn;
@@ -499,6 +432,14 @@ static int dev_acquisition_start(const struct sr_dev_inst *sdi,
return SR_ERR;
}
if (devc->num_stages > 0) {
+ /*
+ * According to http://mygizmos.org/ols/Logic-Sniffer-FPGA-Spec.pdf
+ * reset command must be send prior each arm command
+ */
+ sr_dbg("Send reset command before trigger configure");
+ if (ols_send_reset(serial) != SR_OK)
+ return SR_ERR;
+
delaycount = readcount * (1 - devc->capture_ratio / 100.0);
devc->trigger_at = (readcount - delaycount) * 4 - devc->num_stages;
for (i = 0; i <= devc->num_stages; i++) {
@@ -562,33 +503,33 @@ static int dev_acquisition_start(const struct sr_dev_inst *sdi,
devc->cnt_bytes = devc->cnt_samples = devc->cnt_samples_rle = 0;
memset(devc->sample, 0, 4);
- /* Send header packet to the session bus. */
- std_session_send_df_header(cb_data, LOG_PREFIX);
+ std_session_send_df_header(sdi);
- serial_source_add(sdi->session, serial, G_IO_IN, -1,
- ols_receive_data, cb_data);
+ /* If the device stops sending for longer than it takes to send a byte,
+ * that means it's finished. But wait at least 100 ms to be safe.
+ */
+ serial_source_add(sdi->session, serial, G_IO_IN, 100,
+ ols_receive_data, (struct sr_dev_inst *)sdi);
return SR_OK;
}
-static int dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data)
+static int dev_acquisition_stop(struct sr_dev_inst *sdi)
{
- (void)cb_data;
-
abort_acquisition(sdi);
return SR_OK;
}
-SR_PRIV struct sr_dev_driver ols_driver_info = {
+static struct sr_dev_driver ols_driver_info = {
.name = "ols",
.longname = "Openbench Logic Sniffer",
.api_version = 1,
- .init = init,
- .cleanup = cleanup,
+ .init = std_init,
+ .cleanup = std_cleanup,
.scan = scan,
- .dev_list = dev_list,
- .dev_clear = NULL,
+ .dev_list = std_dev_list,
+ .dev_clear = std_dev_clear,
.config_get = config_get,
.config_set = config_set,
.config_list = config_list,
@@ -596,5 +537,6 @@ SR_PRIV struct sr_dev_driver ols_driver_info = {
.dev_close = std_serial_dev_close,
.dev_acquisition_start = dev_acquisition_start,
.dev_acquisition_stop = dev_acquisition_stop,
- .priv = NULL,
+ .context = NULL,
};
+SR_REGISTER_DEV_DRIVER(ols_driver_info);