X-Git-Url: https://sigrok.org/gitweb/?a=blobdiff_plain;ds=sidebyside;f=decoders%2Fspi%2F__init__.py;h=f76bb064fc8ca72773bae17bec531703496b88e3;hb=0fd8a35de8b89fce395c14190f63c02b9aa976df;hp=1fccbe74dee06292db4ffcd58662b3cce184e134;hpb=24c74fd30fb161837c5f8b01baf3c0fe2dfa4ed5;p=libsigrokdecode.git

diff --git a/decoders/spi/__init__.py b/decoders/spi/__init__.py
index 1fccbe7..f76bb06 100644
--- a/decoders/spi/__init__.py
+++ b/decoders/spi/__init__.py
@@ -1,5 +1,5 @@
 ##
-## This file is part of the sigrok project.
+## This file is part of the libsigrokdecode project.
 ##
 ## Copyright (C) 2012 Uwe Hermann <uwe@hermann-uwe.de>
 ##
@@ -19,30 +19,14 @@
 ##
 
 '''
-Serial Peripheral Interface protocol decoder.
-
-Details:
-TODO
-
-Protocol output format:
-
-SPI packet:
-[<cmd>, <data1>, <data2>]
-
-Commands:
- - 'DATA': <data1> contains the MISO data, <data2> contains the MOSI data.
-   The data is _usually_ 8 bits (but can also be fewer or more bits).
-   Both data items are Python numbers, not strings.
- - 'CS CHANGE': <data1> is the old CS# pin value, <data2> is the new value.
-   Both data items are Python numbers (0/1), not strings.
-
-Examples:
- ['CS-CHANGE', 1, 0]
- ['DATA', 0xff, 0x3a]
- ['DATA', 0x65, 0x00]
- ['CS-CHANGE', 0, 1]
-
+The SPI (Serial Peripheral Interface) protocol decoder supports synchronous
+SPI(-like) protocols with a clock line, a MISO and MOSI line for data
+transfer in two directions, and an optional CS# pin.
+Either MISO or MOSI (but not both) can be optional.
+
+If CS# is supplied, data is only decoded when CS# is asserted (clock
+transitions where CS# is not asserted are ignored). If CS# is not supplied,
+data is decoded on every clock transition (depending on SPI mode).
 '''
 
-from .pd import *
-
+from .pd import Decoder