X-Git-Url: https://sigrok.org/gitweb/?a=blobdiff_plain;ds=sidebyside;f=README.devices;h=290357f5da227cb16223ce05768246995e02a93b;hb=26aec7fdc4c5d1f3e7ec6c373b16b6605b4a6e38;hp=7bed85bad7a2db71f84efd420b7462b36f972cb6;hpb=695f32d89d678b20896e34affc74b4363b686387;p=libsigrok.git diff --git a/README.devices b/README.devices index 7bed85ba..290357f5 100644 --- a/README.devices +++ b/README.devices @@ -42,9 +42,6 @@ The following drivers/devices require a firmware upload upon connection: These can be extracted from the vendor's Windows drivers using a tool from our 'sigrok-util' repository/project. - - nexus-osciprime: The Nexus Computing OsciPrime PC oscilloscope needs - firmware files. These are available from the vendor website. - The following drivers/devices do not need any firmware upload: - agilent-dmm @@ -55,7 +52,6 @@ The following drivers/devices do not need any firmware upload: - demo - fluke-dmm - lascar-el-usb - - link-mso19 - mic-985xx - openbench-logic-sniffer - rigol-ds1xx2 @@ -86,9 +82,7 @@ The following drivers/devices require a serial port specification: - brymen-dmm - colead-slm - fluke-dmm - - link-mso19 - mic-985xx - - nexus-osciprime - openbench-logic-sniffer - serial-dmm - tondaj-sl-814 @@ -234,6 +228,24 @@ See also: http://erste.de/UT61/index.html done +Enabling multimeter / data logger measurement output +---------------------------------------------------- + +Some multimeters or data loggers will not start outputting measurement data +unless a certain action has been performed by the user beforehand. This is +usually mentioned in the vendor manual of the respective device, but here's +a short list for convenience: + + - Digitek DT4000ZC: Briefly press the "RS232" button. + - PCE PCE-DM32: Briefly press the "RS232" button. + - RadioShack 22-812: Press and hold "SELECT" and "RANGE" together. + - TekPower TP4000ZC: Briefly press the "RS232" button. + - UNI-T UT61D: Press the "REL/RS232/USB" button for roughly 1 second. + - V&A VA18B: Keep the "Hz/DUTY" key pressed while powering on the device. + - Victor 70C: Press the "REL/RS232" button for roughly 1 second. + - Victor 86C: Press the "REL/RS232" button for roughly 1 second. + + ALSA driver ----------- @@ -248,16 +260,6 @@ We might write additional drivers to make a similar functionality available on other OSes at some point. -Link Instruments MSO-19 ------------------------ - -The driver for the Link Instruments MSO-19 mixed-signal oscilloscope (MSO) -is currently using libudev (which is a library for the Linux-specific udev -system). Thus, this driver can currently only compile and work on Linux. - -We plan to fix this though, so that it'll work on all other OSes, too. - - ChronoVu LA8 USB VID/PIDs -------------------------