2020-10-04 |
Timo Kokkonen | udev: Add Rigol DG800 and DG900 series VID/PID. |
commit | commitdiff | tree | snapshot |
2020-10-03 |
Gerhard Sittig | pce-322a: unbreak send_command() return code |
commit | commitdiff | tree | snapshot |
2020-09-28 |
Gerhard Sittig | rigol-dg: reduce redundancy in malloc() calls |
commit | commitdiff | tree | snapshot |
2020-09-28 |
Timo Kokkonen | udev: Add Rigol DG1000z Series VID/PID. |
commit | commitdiff | tree | snapshot |
2020-09-28 |
Timo Kokkonen | rigol-dg: Initial Rigol DG1000z driver implementation. |
commit | commitdiff | tree | snapshot |
2020-09-28 |
Timo Kokkonen | rigol-dg: Initial driver skeleton. |
commit | commitdiff | tree | snapshot |
2020-09-28 |
Timo Kokkonen | hwdriver: Add SR_CONF_DUTY_CYCLE & SR_CONF_PHASE. |
commit | commitdiff | tree | snapshot |
2020-09-27 |
Ralf | scpi: accept numbers like 4.0000E3 as integer value |
commit | commitdiff | tree | snapshot |
2020-09-27 |
Gerhard Sittig | serial: lower severity of failed stream detect message |
commit | commitdiff | tree | snapshot |
2020-09-27 |
Gerhard Sittig | ols: more robust device reset in acquisition stop |
commit | commitdiff | tree | snapshot |
2020-09-24 |
Ben Gardiner | ols: send CMD_RESET on acquisition stop |
commit | commitdiff | tree | snapshot |
2020-09-21 |
Gerhard Sittig | brymen-dmm: unbreak dBm reference impedance interpretation |
commit | commitdiff | tree | snapshot |
2020-09-21 |
Gerhard Sittig | brymen-dmm: unbreak temperature response parsing |
commit | commitdiff | tree | snapshot |
2020-09-21 |
Gerhard Sittig | brymen-dmm: rephrase bfunc and value text parsing |
commit | commitdiff | tree | snapshot |
2020-09-21 |
Gerhard Sittig | brymen-dmm: improve text to number conversion robustnes... |
commit | commitdiff | tree | snapshot |
2020-09-20 |
Gerhard Sittig | brymen-dmm: style nits, apply comm param defaults,... |
commit | commitdiff | tree | snapshot |
2020-09-20 |
Gerhard Sittig | brymen-dmm: unbreak BM85x communication by pulsing... |
commit | commitdiff | tree | snapshot |
2020-09-20 |
Gerhard Sittig | serial: add routine to manipulate handshake state ... |
commit | commitdiff | tree | snapshot |
2020-09-20 |
Gerhard Sittig | serial: rephrase check for speed (bitrate) in parameter... |
commit | commitdiff | tree | snapshot |
2020-09-19 |
Gerhard Sittig | dmm/bm52x: introduce support for Brymen BM525s |
commit | commitdiff | tree | snapshot |
2020-09-19 |
Gerhard Sittig | serial-dmm: only do bytes to text conversion at higher... |
commit | commitdiff | tree | snapshot |
2020-09-18 |
Gerhard Sittig | input/csv: provide double precision values to session... |
commit | commitdiff | tree | snapshot |
2020-09-18 |
Gerhard Sittig | analog.c: rephrase analog feed to float conversion... |
commit | commitdiff | tree | snapshot |
2020-09-18 |
Gerhard Sittig | libsigrok-internal.h: add more endianess aware stream... |
commit | commitdiff | tree | snapshot |
2020-09-18 |
Gerhard Sittig | tests/analog: add more tests for analog feed to float... |
commit | commitdiff | tree | snapshot |
2020-09-18 |
Timo Kokkonen | analog.c: sr_analog_to_float(): Support for receiving... |
commit | commitdiff | tree | snapshot |
2020-09-15 |
Jiri Slaby | tests: strutil, use ck_assert |
commit | commitdiff | tree | snapshot |
2020-09-02 |
Gerhard Sittig | input/saleae: improve L2D undersampling, do provide... |
commit | commitdiff | tree | snapshot |
2020-09-01 |
Gerhard Sittig | korad-kaxxxxp: remove obsolete code (clear before read... |
commit | commitdiff | tree | snapshot |
2020-09-01 |
Gerhard Sittig | korad-kaxxxxp: speed up scan process, rephrase response... |
commit | commitdiff | tree | snapshot |
2020-08-28 |
Gerhard Sittig | korad-kaxxxxp: style cleanup in device scan, keep serno... |
commit | commitdiff | tree | snapshot |
2020-08-26 |
Gerhard Sittig | input/saleae: keep previous channels across cleanup... |
commit | commitdiff | tree | snapshot |
2020-08-25 |
Gerhard Sittig | scpi-pps: use remote and local modes for HMP4000 |
commit | commitdiff | tree | snapshot |
2020-08-25 |
Gerhard Sittig | scpi-pps: Add more HMP4000 series devices |
commit | commitdiff | tree | snapshot |
2020-08-25 |
Florian Schmidt | scpi-pps: add support for Hameg / Rohde & Schwarz HMP4040 |
commit | commitdiff | tree | snapshot |
2020-08-25 |
Gerhard Sittig | doc: update README.devices for GWInstek VCP (CP210x... |
commit | commitdiff | tree | snapshot |
2020-08-25 |
Gerhard Sittig | scpi_serial: add "GWInstek VCP" (PID 0x0030) as seen... |
commit | commitdiff | tree | snapshot |
2020-08-25 |
Gerhard Sittig | scpi-dmm: factor out some OL detection limits |
commit | commitdiff | tree | snapshot |
2020-08-25 |
Gerhard Sittig | scpi-dmm: add SR_CONF_CONN getter |
commit | commitdiff | tree | snapshot |
2020-08-24 |
v1ne | ols: Detect Demon Core, use its canonic command names |
commit | commitdiff | tree | snapshot |
2020-08-24 |
v1ne | ols: Refactor, deduplicate logic packet code |
commit | commitdiff | tree | snapshot |
2020-08-24 |
v1ne | ols: Use symbolic name for "success" error code. |
commit | commitdiff | tree | snapshot |
2020-08-24 |
v1ne | ols: Make constant names more precise, clarify comment |
commit | commitdiff | tree | snapshot |
2020-08-24 |
v1ne | ols: Rename "flags" to "capture flags". |
commit | commitdiff | tree | snapshot |
2020-08-24 |
v1ne | ols: Symbolic name for magic value, reflect units in... |
commit | commitdiff | tree | snapshot |
2020-08-24 |
v1ne | ols: Remove stray command |
commit | commitdiff | tree | snapshot |
2020-08-24 |
v1ne | ols: Make use of zero-initialization. |
commit | commitdiff | tree | snapshot |
2020-08-23 |
Frank Stettner | libsigrok.h: Fix comment for unit Joule. |
commit | commitdiff | tree | snapshot |
2020-08-22 |
Frank Stettner | libsigrok.h: Add Joule, Coulomb, and Ah units. |
commit | commitdiff | tree | snapshot |
2020-08-22 |
Frank Stettner | libsigrok.h: Add MQ for electric charge. |
commit | commitdiff | tree | snapshot |
2020-08-22 |
Frank Stettner | teleinfo: Fix measured quantity (energy, not power). |
commit | commitdiff | tree | snapshot |
2020-08-22 |
Gerhard Sittig | output/csv: always generate text for analog/logic data... |
commit | commitdiff | tree | snapshot |
2020-08-22 |
Gerhard Sittig | output/csv: check unsupported/untested input signal... |
commit | commitdiff | tree | snapshot |
2020-08-22 |
Timo Kokkonen | README.devices: Document enabling GW Instek GDM-397... |
commit | commitdiff | tree | snapshot |
2020-08-22 |
Timo Kokkonen | serial-dmm: Add GW Instek GDM-397 meter support. |
commit | commitdiff | tree | snapshot |
2020-08-22 |
Gerhard Sittig | korad-kaxxxxp: add support for forced "detection" of... |
commit | commitdiff | tree | snapshot |
2020-08-22 |
Gerhard Sittig | hwdriver: introduce SR_CONF_FORCE_DETECT config key... |
commit | commitdiff | tree | snapshot |
2020-08-22 |
Gerhard Sittig | korad-kaxxxxp: add config_get() support for SR_CONF_CONN |
commit | commitdiff | tree | snapshot |
2020-08-20 |
Timo Kokkonen | scpi-dmm: Remove SYST:LOC hack for GWInstek meters. |
commit | commitdiff | tree | snapshot |
2020-08-20 |
Timo Kokkonen | scpi-dmm: Add new command DMM_CMD_SETUP_LOCAL. |
commit | commitdiff | tree | snapshot |
2020-08-17 |
Gerhard Sittig | scpi-dmm: alpha-sort the list of supported devices... |
commit | commitdiff | tree | snapshot |
2020-08-17 |
Gerhard Sittig | scpi-dmm: minor style adjustment (gdm906x, analog init... |
commit | commitdiff | tree | snapshot |
2020-08-17 |
Gerhard Sittig | scpi: Raise severity when IDN response lacks the serial... |
commit | commitdiff | tree | snapshot |
2020-08-17 |
Gerhard Sittig | scpi_serial: Rephrase NL and NL+CR line termination... |
commit | commitdiff | tree | snapshot |
2020-08-17 |
Timo Kokkonen | scpi_serial: Add GW-Instek GPD-9061 (USBCDC mode) VID... |
commit | commitdiff | tree | snapshot |
2020-08-17 |
Timo Kokkonen | udev: Add GW-Instek GDM-9061 VID/PID. |
commit | commitdiff | tree | snapshot |
2020-08-17 |
Timo Kokkonen | scpi-dmm: Add support for GW-Instek 906X series bench... |
commit | commitdiff | tree | snapshot |
2020-08-17 |
Timo Kokkonen | scpi-dmm: Add support for GW-Instek 8200A series bench... |
commit | commitdiff | tree | snapshot |
2020-08-17 |
Timo Kokkonen | scpi: Support devices that omit serial number in *IDN... |
commit | commitdiff | tree | snapshot |
2020-08-17 |
Timo Kokkonen | scpi_serial: Add support for (broken) devices sending... |
commit | commitdiff | tree | snapshot |
2020-08-09 |
Gerhard Sittig | serial_hid: add iokit= prefix for the Mac IOKit special... |
commit | commitdiff | tree | snapshot |
2020-08-05 |
Gerhard Sittig | output/csv: complete and improve timestamp construction... |
commit | commitdiff | tree | snapshot |
2020-08-05 |
Earle F. Philhower... | output/csv: Avoid accumulated timestamp error for odd... |
commit | commitdiff | tree | snapshot |
2020-08-03 |
Timo Kokkonen | gwinstek-gpd: Add missing SW limits API calls. |
commit | commitdiff | tree | snapshot |
2020-08-03 |
Gerhard Sittig | sw_limits: add const for limits param for config_get |
commit | commitdiff | tree | snapshot |
2020-08-01 |
Gerhard Sittig | serial: make failed flush() in open() non-fatal, CP2110... |
commit | commitdiff | tree | snapshot |
2020-08-01 |
Timo Kokkonen | gwinstek-gpd: Add support to old (hardware) revision... |
commit | commitdiff | tree | snapshot |
2020-07-31 |
Timo Kokkonen | gwinstek-gpd: Add support for GPD-3303S. |
commit | commitdiff | tree | snapshot |
2020-07-31 |
Gerhard Sittig | output/ascii: data type nits, rephrase sample bit access |
commit | commitdiff | tree | snapshot |
2020-07-31 |
Gerhard Sittig | output/ascii: style nits in name alignment and trigger... |
commit | commitdiff | tree | snapshot |
2020-07-31 |
v1ne | output/ascii: Also print trigger marker for "short... |
commit | commitdiff | tree | snapshot |
2020-07-31 |
v1ne | output/ascii: Vertically align logic channel names |
commit | commitdiff | tree | snapshot |
2020-07-31 |
v1ne | output/ascii: Remove unused variable |
commit | commitdiff | tree | snapshot |
2020-07-28 |
milan hauth | analog: avoid double free in '-O analog' shutdown path |
commit | commitdiff | tree | snapshot |
2020-07-27 |
Gerhard Sittig | output/srzip: improve robustness (analog-only acquisition) |
commit | commitdiff | tree | snapshot |
2020-07-27 |
Mike Walters | scpi-dmm: Add Agilent 34410A. |
commit | commitdiff | tree | snapshot |
2020-07-26 |
Wolfram Sang | serial: flush() after open() in the serial core. |
commit | commitdiff | tree | snapshot |
2020-07-26 |
Gerhard Sittig | bt: drop bt_put_le16() dependency (not universally... |
commit | commitdiff | tree | snapshot |
2020-07-24 |
Gerhard Sittig | input: use common support to send samplerate meta packet |
commit | commitdiff | tree | snapshot |
2020-07-24 |
Gerhard Sittig | input/saleae: reduce the format match routine's greed |
commit | commitdiff | tree | snapshot |
2020-07-24 |
Gerhard Sittig | input/saleae: introduce input module for Saleae Logic... |
commit | commitdiff | tree | snapshot |
2020-07-24 |
Gerhard Sittig | libsigrok-internal: add endianess helpers for floating... |
commit | commitdiff | tree | snapshot |
2020-07-24 |
Gerhard Sittig | input/vcd: unbreak the logic which skips a user specifi... |
commit | commitdiff | tree | snapshot |
2020-07-24 |
Gerhard Sittig | output/srzip: queue samples before ZIP operation |
commit | commitdiff | tree | snapshot |
2020-07-24 |
Gerhard Sittig | output/vcd: support analog data, more channels, minor... |
commit | commitdiff | tree | snapshot |
2020-07-24 |
Gerhard Sittig | input/vcd: rework VCD file import logic (vector, intege... |
commit | commitdiff | tree | snapshot |
2020-07-24 |
Gerhard Sittig | input: introduce helper for buffered submission of... |
commit | commitdiff | tree | snapshot |
2020-07-23 |
Gerhard Sittig | input/binary: align sr_session_send() chunks to unit... |
commit | commitdiff | tree | snapshot |
2020-07-18 |
Uwe Hermann | bindings/ruby: Bump minimum requirement to Ruby 2.5.0. |
commit | commitdiff | tree | snapshot |
2020-07-13 |
Soeren Apel | fx2lafw: Use 1 as default for frame limit and reset... |
commit | commitdiff | tree | snapshot |
next |