| 2017-07-09 |
Uwe Hermann | layout: Load and resave via Kicad 4.0.5, update from... |
commit | commitdiff | tree | snapshot |
| 2017-07-09 |
Uwe Hermann | Regenerate netlist. |
commit | commitdiff | tree | snapshot |
| 2017-07-09 |
Uwe Hermann | schematics: Load and resave via Kicad 4.0.5, fixup... |
commit | commitdiff | tree | snapshot |
| 2014-07-22 |
Uwe Hermann | Drop references to obsolete sigrok-commits mailing... |
commit | commitdiff | tree | snapshot |
| 2013-04-26 |
Uwe Hermann | README: Add "Copyright and license" section. |
commit | commitdiff | tree | snapshot |
| 2013-04-06 |
Uwe Hermann | PCB: Arrange and connect various parts/pins. |
commit | commitdiff | tree | snapshot |
| 2013-04-04 |
Uwe Hermann | Various updates. |
commit | commitdiff | tree | snapshot |
| 2013-03-26 |
Uwe Hermann | Replace 5x2 SMD connector with two 5x1 pins/pads. |
commit | commitdiff | tree | snapshot |
| 2013-03-25 |
Uwe Hermann | Update PCB layout (removed resistor-pack). |
commit | commitdiff | tree | snapshot |
| 2013-03-25 |
Uwe Hermann | Update netlist. |
commit | commitdiff | tree | snapshot |
| 2013-03-25 |
Uwe Hermann | Schematics: Drop resistor-pack for now. |
commit | commitdiff | tree | snapshot |
| 2012-10-23 |
Uwe Hermann | Schematics: Fix wiki page URL. |
commit | commitdiff | tree | snapshot |
| 2012-10-23 |
Uwe Hermann | README: Update description and git URL. |
commit | commitdiff | tree | snapshot |
| 2012-10-23 |
Uwe Hermann | First unfinished attempt at routing the board. |
commit | commitdiff | tree | snapshot |
| 2012-10-23 |
Uwe Hermann | Switch 5mil tracks, 0.2mm vias (0.25mm restring). |
commit | commitdiff | tree | snapshot |
| 2012-10-23 |
Uwe Hermann | Update PCB to new netlist. |
commit | commitdiff | tree | snapshot |
| 2012-10-23 |
Uwe Hermann | schematic: Various simplifications and fixes, regen... |
commit | commitdiff | tree | snapshot |
| 2012-06-06 |
Uwe Hermann | Start arranging components (unfinished). |
commit | commitdiff | tree | snapshot |
| 2012-06-05 |
Uwe Hermann | Stuff everything into 12mm x 12mm PCB borders. |
commit | commitdiff | tree | snapshot |
| 2012-06-05 |
Uwe Hermann | schematics: Fix typo. |
commit | commitdiff | tree | snapshot |
| 2012-06-05 |
Uwe Hermann | Draw 16mm x 12mm PCB borders (for now). |
commit | commitdiff | tree | snapshot |
| 2012-06-04 |
Uwe Hermann | PCB: Tigthen DRC settings. |
commit | commitdiff | tree | snapshot |
| 2012-06-04 |
Uwe Hermann | Re-read netlist in the PCB. |
commit | commitdiff | tree | snapshot |
| 2012-06-04 |
Uwe Hermann | Add CONN-5x2-SMD-127MM footprint. |
commit | commitdiff | tree | snapshot |
| 2012-06-04 |
Uwe Hermann | Update netlist. |
commit | commitdiff | tree | snapshot |
| 2012-06-04 |
Uwe Hermann | schematics: Add 10pin connector for the probes. |
commit | commitdiff | tree | snapshot |
| 2012-06-04 |
Uwe Hermann | schematics: Replace 0603 resistorpack with 0402 one. |
commit | commitdiff | tree | snapshot |
| 2012-06-04 |
Uwe Hermann | Add RPACK-8-SMD-0402 footprint. |
commit | commitdiff | tree | snapshot |
| 2012-06-04 |
Uwe Hermann | Update PCB due to netlist changes. |
commit | commitdiff | tree | snapshot |
| 2012-06-04 |
Uwe Hermann | Regenerate netlist. |
commit | commitdiff | tree | snapshot |
| 2012-06-04 |
Uwe Hermann | schematics: Change all 0603 parts to 0402. |
commit | commitdiff | tree | snapshot |
| 2012-06-04 |
Uwe Hermann | Start arranging parts. |
commit | commitdiff | tree | snapshot |
| 2012-06-03 |
Uwe Hermann | PCB: Disperse parts a bit. |
commit | commitdiff | tree | snapshot |
| 2012-06-03 |
Uwe Hermann | PCB: Read in netlist. |
commit | commitdiff | tree | snapshot |
| 2012-06-03 |
Uwe Hermann | PCB: Set DRC values (min. widths etc). |
commit | commitdiff | tree | snapshot |
| 2012-06-03 |
Uwe Hermann | Re-create netlist. |
commit | commitdiff | tree | snapshot |
| 2012-06-03 |
Uwe Hermann | Bugfix: Replace 2-pin CRYSTAL with 4-pin QUARTZCMS4. |
commit | commitdiff | tree | snapshot |
| 2012-06-03 |
Uwe Hermann | Micro-USB B SMD footprint: Add missing SHIELD pin numbers. |
commit | commitdiff | tree | snapshot |
| 2012-06-03 |
Uwe Hermann | Re-run 'Annotate schematic'. |
commit | commitdiff | tree | snapshot |
| 2012-06-03 |
Uwe Hermann | schematic: RESET# needs a 2K7 and 1uF (TRM, p. 83). |
commit | commitdiff | tree | snapshot |
| 2012-06-03 |
Uwe Hermann | Add QFN56 (0.5mm pin spacing) footprint. |
commit | commitdiff | tree | snapshot |
| 2012-06-03 |
Uwe Hermann | Add AMB11 footprint (crystal). |
commit | commitdiff | tree | snapshot |
| 2012-06-03 |
Uwe Hermann | Add RPACK-8-SMD-0603 footprint. |
commit | commitdiff | tree | snapshot |
| 2012-06-03 |
Uwe Hermann | Add empty PCB. |
commit | commitdiff | tree | snapshot |
| 2012-06-03 |
Uwe Hermann | Generate netlist. |
commit | commitdiff | tree | snapshot |
| 2012-06-03 |
Uwe Hermann | schematic: Annotate all components. |
commit | commitdiff | tree | snapshot |
| 2012-06-03 |
Uwe Hermann | Add missing footprint for the resistorpack. |
commit | commitdiff | tree | snapshot |
| 2012-06-03 |
Uwe Hermann | schematic: Various fixes, add metadata. |
commit | commitdiff | tree | snapshot |
| 2012-06-03 |
Uwe Hermann | schematic: Add PWR_FLAG (Kicad-internal stuff). |
commit | commitdiff | tree | snapshot |
| 2012-06-03 |
Uwe Hermann | Add new footprint library to project. |
commit | commitdiff | tree | snapshot |
| 2012-06-03 |
Uwe Hermann | Add a MICRO-USB-B-SMD footprint to a new library. |
commit | commitdiff | tree | snapshot |
| 2012-06-03 |
Uwe Hermann | Add some more footprints for symbols. |
commit | commitdiff | tree | snapshot |
| 2012-06-03 |
Uwe Hermann | Mark a few more pins as no-connect for now. |
commit | commitdiff | tree | snapshot |
| 2012-06-03 |
Uwe Hermann | Fix a few pin types. |
commit | commitdiff | tree | snapshot |
| 2012-06-03 |
Uwe Hermann | Bugfix: USB shield pins were not properly connected. |
commit | commitdiff | tree | snapshot |
| 2012-06-03 |
Uwe Hermann | Add footprints for all 0603 parts. |
commit | commitdiff | tree | snapshot |
| 2012-06-03 |
Uwe Hermann | Add resistorpack (8 x 100 Ohm) to PB0-PB7. |
commit | commitdiff | tree | snapshot |
| 2012-06-03 |
Uwe Hermann | Add two optional general-purpose LEDs (PD0/1). |
commit | commitdiff | tree | snapshot |
| 2012-06-03 |
Uwe Hermann | Add a power LED. |
commit | commitdiff | tree | snapshot |
| 2012-06-03 |
Uwe Hermann | Replace TLV1117 with MIC5319. |
commit | commitdiff | tree | snapshot |
| 2012-06-02 |
Uwe Hermann | Change Mini-USB B to Micro-USB B connector. |
commit | commitdiff | tree | snapshot |
| 2012-06-02 |
Uwe Hermann | FX2: Use "IC", not "U" for the chip refdes. |
commit | commitdiff | tree | snapshot |
| 2012-06-02 |
Uwe Hermann | RESET# is tied to VCC via a resistor. |
commit | commitdiff | tree | snapshot |
| 2012-06-02 |
Uwe Hermann | Various updates, move stuff around, add pin names. |
commit | commitdiff | tree | snapshot |
| 2012-06-02 |
Uwe Hermann | Use 12pF load capacitors for the crystal. |
commit | commitdiff | tree | snapshot |
| 2012-06-02 |
Uwe Hermann | 2.2uF/100nF for all AVCC pins (as per docs). |
commit | commitdiff | tree | snapshot |
| 2012-06-02 |
Uwe Hermann | Add 100nF bypass caps for all VCC pins. |
commit | commitdiff | tree | snapshot |
| 2012-06-02 |
Uwe Hermann | FX2: The WAKEUP pin is tied to VCC via a 100K resistor. |
commit | commitdiff | tree | snapshot |
| 2012-06-02 |
Uwe Hermann | FX2: The RESERVED pin needs to be tied to GND. |
commit | commitdiff | tree | snapshot |
| 2012-06-02 |
Uwe Hermann | Add I2C pullups (2.2kOhm). |
commit | commitdiff | tree | snapshot |
| 2012-06-02 |
Uwe Hermann | Add a README. |
commit | commitdiff | tree | snapshot |
| 2012-06-01 |
Uwe Hermann | lib: FX2 symbol: Nicer active-low pin marking. |
commit | commitdiff | tree | snapshot |
| 2012-06-01 |
Uwe Hermann | Add VCC/GND circuitry, mark PA0-7/PD0-7 as no-connect. |
commit | commitdiff | tree | snapshot |
| 2012-06-01 |
Uwe Hermann | Add initial XTAL circuitry. |
commit | commitdiff | tree | snapshot |
| 2012-06-01 |
Uwe Hermann | Add initial USB connector circuitry. |
commit | commitdiff | tree | snapshot |
| 2012-06-01 |
Uwe Hermann | Add initial TLV1117 circuitry. |
commit | commitdiff | tree | snapshot |
| 2012-06-01 |
Uwe Hermann | Fill background of FX2 component. |
commit | commitdiff | tree | snapshot |
| 2012-06-01 |
Uwe Hermann | Place FX2, TLV1117, and USB connector components. |
commit | commitdiff | tree | snapshot |
| 2012-06-01 |
Uwe Hermann | Add TLV1117-33 symbol to library. |
commit | commitdiff | tree | snapshot |
| 2012-06-01 |
Uwe Hermann | Add MINI-USB-B-SMD symbol to library. |
commit | commitdiff | tree | snapshot |
| 2012-06-01 |
Uwe Hermann | Add fx2grok-cube.lib library to project. |
commit | commitdiff | tree | snapshot |
| 2012-06-01 |
Uwe Hermann | Move files to 0.1 subdir. |
commit | commitdiff | tree | snapshot |
| 2012-06-01 |
Uwe Hermann | Add initial Cypress CY7C68013A-56 symbol. |
commit | commitdiff | tree | snapshot |
| 2012-06-01 |
Uwe Hermann | Add empty schematics. |
commit | commitdiff | tree | snapshot |
| 2012-06-01 |
Uwe Hermann | Add empty Kicad project. |
commit | commitdiff | tree | snapshot |
|
projects / fx2grok.git / shortlog