]> sigrok.org Git - libsigrok.git/shortlog
libsigrok.git
2014-01-21 Bert Vermeulenbrymen-dmm: Make protocol parser locale-independent.
2014-01-21 Bert Vermeulenagilent-dmm: Make protocol parser locale-independent.
2014-01-21 Bert Vermeulenfluke-dmm: Make protocol parsers locale-independent.
2014-01-21 Bert VermeulenMake sure to delete temporary metadata file after use.
2014-01-21 Bert Vermeulenstd: Fix caller prefix output.
2014-01-21 Martin Lingrigol-ds: DS1000 series still needs the stupid delay.
2014-01-21 Daniel Elstnersession: Auto-commit settings before acquisition.
2014-01-21 Bert Vermeulenrigol-ds: On DS1000 with firmware < 0.2.4, use legacy...
2014-01-20 Bert Vermeulenrigol-ds: Shorten vendor name.
2014-01-20 Bert Vermeulenagilent-dmm: Shorten vendor name.
2014-01-20 Bert Vermeulenols: Add option to turn test patterns off again.
2014-01-20 Daniel Elstnerhwdriver: Introduce sr_config_commit() API call.
2014-01-20 Aurelien Jacobsrigol-ds: add support for more keys in config_get()
2014-01-20 Aurelien Jacobsrigol-ds: use appropriately defined NUM_VDIV constant
2014-01-20 Aurelien Jacobsrigol-ds: add more valid timebases for DS2302
2014-01-20 Aurelien Jacobsrigol-ds: fix set_cfg() calls with float parameters...
2014-01-20 Martin Lingrigol-ds: Send FRAME_BEGIN and FRAME_END per frame...
2014-01-20 Martin Lingrigol-ds: Cleanup and fix check for short data blocks.
2014-01-20 Martin Lingrigol-ds: Use *OPC? command rather than delay to await...
2014-01-20 Martin Lingscpi: Remove redundant newline removal in sr_scpi_get_h...
2014-01-20 Martin Lingrigol-ds: Use standard sr_scpi_get functions, remove...
2014-01-20 Martin Lingscpi: Strip trailing newlines in sr_scpi_get_string().
2014-01-20 Martin Lingrigol-ds: DS1000 series actually use IEEE488.2 data...
2014-01-20 Martin Lingrigol-ds: Correct digital waveform block sizes.
2014-01-20 Martin Lingrigol-ds: Check SCPI read is complete after reading...
2014-01-20 Martin Lingrigol-ds: Update which channels are enabled after makin...
2014-01-19 Bert VermeulenRemove SR_CONF_MAX_UNCOMPRESSED_SAMPLES again.
2014-01-18 Daniel Elstnersysclk-lwla: Improve message log output.
2014-01-18 Daniel Elstnersysclk-lwla: Streamline packet output logic.
2014-01-18 Daniel Elstnersysclk-lwla: Implement SR_CONF_LIMIT_MSEC.
2014-01-17 Uwe Hermanntests: Fix a few warnings.
2014-01-17 Bert Vermeulendemo: Bring analog square wave amplitude into line...
2014-01-17 poljar (Damir... demo: Add analog sawtooth pattern.
2014-01-17 poljar (Damir... demo: Add triangle pattern.
2014-01-17 poljar (Damir... demo: Implement sine wave pattern.
2014-01-17 Bert Vermeulenuni-t-ut32x: Fix typo that prevents usage with multiple...
2014-01-17 Uwe Hermannrigol-ds: Minor whitespace fixes.
2014-01-17 Martin Lingrigol-ds: Enable/disable LA pod when (de)selecting...
2014-01-17 Martin Lingrigol-ds: Reset num_frames to zero in dev_acquisition_s...
2014-01-17 Martin Lingrigol-ds: Make sure to always send SR_DF_END at end...
2014-01-17 Martin Lingrigol-ds: Calculate effective samplerate.
2014-01-17 Martin Lingrigol-ds: Separate function to compute analog frame...
2014-01-17 Martin Lingrigol-ds: Advertise SR_CONF_LIMIT_FRAMES support.
2014-01-17 Martin Lingrigol-ds: Fix check for probe group validity.
2014-01-16 Uwe Hermannhameg-hmo: Fix two compiler warnings on Windows.
2014-01-16 Uwe Hermannusb: Fix two compiler warnings on Windows.
2014-01-16 poljar (Damir... hameg-hmo: Silence warning about format security.
2014-01-16 poljar (Damir... hameg-hmo: Reset the number of acquired frames in acqui...
2014-01-16 poljar (Damir... hameg-hmo: Expose more options with config_get().
2014-01-16 poljar (Damir... hameg-hmo: Advertise the frame limit option.
2014-01-16 poljar (Damir... hameg-hmo: Update the sample rate when the channel...
2014-01-16 poljar (Damir... hameg-hmo: Add support for sample rate fetching.
2014-01-16 poljar (Damir... scpi: Add CMD_GET_SAMPLE_RATE to the command enum.
2014-01-16 poljar (Damir... hameg-hmo: Change the way vdiv and timebase are saved.
2014-01-16 poljar (Damir... hameg-hmo: Send the DF_END packet in acquisition_stop()
2014-01-16 poljar (Damir... hameg-hmo: Close the device after initial scan.
2014-01-16 poljar (Damir... hameg-hmo: Handle floating point numbers while ignoring...
2014-01-16 poljar (Damir... scpi: Use sr_atof_ascii() instead of sr_atof().
2014-01-16 poljar (Damir... strutil: Add function to parse floating point numbers...
2014-01-16 poljar (Damir... device: Pass sdi as an function argument to config_list...
2014-01-16 poljar (Damir... strutil: Correctly parse floating point frequencies...
2014-01-15 Daniel Elstnersysclk-lwla: Make use of the probe index again.
2014-01-15 Daniel Elstnersysclk-lwla: Bypass divider in external clock mode.
2014-01-15 Daniel Elstnersysclk-lwla: Utility functions clean-up and semantic...
2014-01-15 Daniel Elstnersysclk-lwla: Remove unused dev_context::next_state.
2014-01-15 Daniel Elstnersysclk-lwla: Avoid warning due to bogus range check.
2014-01-14 Aurelien Jacobsconfigure: add -Wmissing-prototypes compiler option
2014-01-14 Aurelien Jacobsremove unused static functions
2014-01-14 Aurelien Jacobschange a bunch of functions from SR_PRIV to static
2014-01-14 Aurelien Jacobsmove function declarations to the appropriate header
2014-01-14 Aurelien Jacobses519xx: add missing declarations for es519xx_2400_11b_...
2014-01-14 Aurelien Jacobsgnuplot: proper error message when using gnuplot output...
2014-01-14 Aurelien Jacobsadd udev rule for the Rigol DS2000 series
2014-01-14 Uwe Hermannsysclk-lwla: Fix probe name issue.
2014-01-14 Uwe Hermannconfigure.ac: Don't build sysclk-lwla if libusb-1.0...
2014-01-14 Uwe Hermannconfigure.ac: Move sysclk-lwla chunk to correct location.
2014-01-14 Daniel Elstnersysclk-lwla: Honor SR_CONF_CONN at scan time.
2014-01-14 Daniel Elstnersysclk-lwla: Fix calculation of the running sample...
2014-01-14 Daniel Elstnersysclk-lwla: Implement support for the LWLA1034.
2014-01-14 Daniel Elstnersysclk-lwla: Initial driver skeleton.
2014-01-14 Martin Lingrigol-ds: Use correct digital channel numbers when...
2014-01-14 Bert Vermeulencem-dt-885x: Don't use char as signed type.
2014-01-13 Aurelien Jacobsscpi: properly check for HAVE_RPC (which is always...
2014-01-13 Aurelien Jacobsrigol-ds: remove lonely break
2014-01-13 Aurelien Jacobsrigol-ds: prevent config_list() to return empty g_variant
2014-01-13 Bert VermeulenUse PRIu64 for format in pretty-printer.
2014-01-13 Aurelien Jacobsrigol-ds: does not depend on libserialport
2014-01-13 Aurelien Jacobsscpi_usbtmc: does not depend on libserialport
2014-01-13 poljar (Damir... udev: Add the Rigol DG4000 series to the udev rules
2014-01-13 Bert Vermeulenatten-pps3xxx: Fix options reporting.
2014-01-13 Bert Vermeulenatten-pps3xxx: Fix output channel mode get.
2014-01-12 Bert Vermeulendemo: Properly handle logic vs. analog when setting...
2014-01-12 Bert Vermeulendemo: Split supported device options by probe group.
2014-01-12 Aurelien Jacobsscpi_vxi: ensure the vxi link was properly opened befor...
2014-01-11 Aurelien Jacobsscpi_tcp: split into scpi_tcp_raw and scpi_tcp_rigol
2014-01-11 Aurelien Jacobsscpi: make the scpi_dev_inst_new more generic
2014-01-11 Aurelien Jacobsscpi: factorize dev_inst_new calls out of individual...
2014-01-11 Aurelien Jacobsscpi: add VXI transport support
2014-01-11 Aurelien Jacobsimport VXI RPC Language description
2014-01-11 Marc Schinkconfigure.ac: Disable atten-pps3xxx driver if libserial...
next