]> sigrok.org Git - fx2grok.git/shortlog
fx2grok.git
2012-06-02 Uwe HermannFX2: Use "IC", not "U" for the chip refdes.
2012-06-02 Uwe HermannRESET# is tied to VCC via a resistor.
2012-06-02 Uwe HermannVarious updates, move stuff around, add pin names.
2012-06-02 Uwe HermannUse 12pF load capacitors for the crystal.
2012-06-02 Uwe Hermann2.2uF/100nF for all AVCC pins (as per docs).
2012-06-02 Uwe HermannAdd 100nF bypass caps for all VCC pins.
2012-06-02 Uwe HermannFX2: The WAKEUP pin is tied to VCC via a 100K resistor.
2012-06-02 Uwe HermannFX2: The RESERVED pin needs to be tied to GND.
2012-06-02 Uwe HermannAdd I2C pullups (2.2kOhm).
2012-06-02 Uwe HermannAdd a README.
2012-06-01 Uwe Hermannlib: FX2 symbol: Nicer active-low pin marking.
2012-06-01 Uwe HermannAdd VCC/GND circuitry, mark PA0-7/PD0-7 as no-connect.
2012-06-01 Uwe HermannAdd initial XTAL circuitry.
2012-06-01 Uwe HermannAdd initial USB connector circuitry.
2012-06-01 Uwe HermannAdd initial TLV1117 circuitry.
2012-06-01 Uwe HermannFill background of FX2 component.
2012-06-01 Uwe HermannPlace FX2, TLV1117, and USB connector components.
2012-06-01 Uwe HermannAdd TLV1117-33 symbol to library.
2012-06-01 Uwe HermannAdd MINI-USB-B-SMD symbol to library.
2012-06-01 Uwe HermannAdd fx2grok-cube.lib library to project.
2012-06-01 Uwe HermannMove files to 0.1 subdir.
2012-06-01 Uwe HermannAdd initial Cypress CY7C68013A-56 symbol.
2012-06-01 Uwe HermannAdd empty schematics.
2012-06-01 Uwe HermannAdd empty Kicad project.