]>
sigrok.org Git - libsigrok.git/log
Uwe Hermann [Tue, 4 Jun 2013 13:32:20 +0000 (15:32 +0200)]
ikalogic-scanaplus: Initial driver implementation.
Uwe Hermann [Fri, 21 Jun 2013 15:15:10 +0000 (17:15 +0200)]
ikalogic-scanaplus: Initial driver skeleton.
Florian Knodt [Fri, 5 Jul 2013 12:02:50 +0000 (14:02 +0200)]
Support for UNI-T UT60A/E multimeters via RS232 or USB
Marc Schink [Tue, 2 Jul 2013 19:52:23 +0000 (21:52 +0200)]
Use GET_REPORT request for device to host transfer.
Uwe Hermann [Sat, 22 Jun 2013 15:12:38 +0000 (17:12 +0200)]
error.c: Simplify and shorten.
Uwe Hermann [Sat, 22 Jun 2013 15:05:57 +0000 (17:05 +0200)]
README.devices: Minor updates.
Uwe Hermann [Sat, 22 Jun 2013 14:53:13 +0000 (16:53 +0200)]
uni-t-dmm: Add support for the Voltcraft VC-830.
Uwe Hermann [Sat, 22 Jun 2013 14:48:00 +0000 (16:48 +0200)]
serial-dmm: Add support for the Voltcraft VC-830.
Uwe Hermann [Fri, 21 Jun 2013 13:18:33 +0000 (15:18 +0200)]
configure.ac: Move an AM_CONDITIONAL to the correct location.
Uwe Hermann [Fri, 21 Jun 2013 13:11:36 +0000 (15:11 +0200)]
configure.ac: Fix build when libusb-1.0 not available.
The IKALOGIC Scanalogic2 needs libusb-1.0, thus disable this driver when
libusb-1.0 cannot be found.
Bert Vermeulen [Thu, 20 Jun 2013 12:35:34 +0000 (14:35 +0200)]
cem-dt-885x: Support for retrieving stored samples
Bert Vermeulen [Wed, 19 Jun 2013 10:23:30 +0000 (12:23 +0200)]
cem-dt-885x: Support for SR_CONF_DATA_SOURCE
This device can do both live and memory-based acquisition.
Bert Vermeulen [Wed, 19 Jun 2013 10:18:00 +0000 (12:18 +0200)]
Add SR_CONF key for data source
Bert Vermeulen [Mon, 17 Jun 2013 13:46:14 +0000 (15:46 +0200)]
cem-dt-885x: Support for powering off the device
Bert Vermeulen [Mon, 17 Jun 2013 09:54:37 +0000 (11:54 +0200)]
Add SR_CONF key for powering off a device
Bert Vermeulen [Sun, 16 Jun 2013 23:26:25 +0000 (01:26 +0200)]
cem-dt-885x: Support for sound pressure level measurement range
Bert Vermeulen [Sun, 16 Jun 2013 23:25:41 +0000 (01:25 +0200)]
Add SR_CONF key for sound pressure level measurement range
Bert Vermeulen [Sun, 16 Jun 2013 11:23:58 +0000 (13:23 +0200)]
cem-dt-885x: Fix datalog on/off setting in max/min hold mode
As it turns out, the device randomly decides to send no logging state
info when max hold or min hold mode is enabled.
Bert Vermeulen [Sun, 16 Jun 2013 10:14:09 +0000 (12:14 +0200)]
cem-dt-885x: Support for max/min hold modes
Bert Vermeulen [Sun, 16 Jun 2013 10:12:20 +0000 (12:12 +0200)]
Add SR_CONF keys for max/min hold modes
Bert Vermeulen [Sat, 15 Jun 2013 11:00:41 +0000 (13:00 +0200)]
cem-dt-885x: Support for changing time weighting
Bert Vermeulen [Sat, 15 Jun 2013 10:17:55 +0000 (12:17 +0200)]
cem-dt-885x: Support for changing frequency weighting
Bert Vermeulen [Sat, 15 Jun 2013 10:09:31 +0000 (12:09 +0200)]
Add SR_CONF keys for sound pressure level time and frequency weighting
Bert Vermeulen [Thu, 13 Jun 2013 12:33:15 +0000 (14:33 +0200)]
cem-dt-885x: Support for turning data logging on/off
Bert Vermeulen [Thu, 13 Jun 2013 12:23:06 +0000 (14:23 +0200)]
Add SR_ERR_TIMEOUT
Florian Steinhardt [Tue, 11 Jun 2013 18:35:57 +0000 (20:35 +0200)]
added Voltcraft M-3650D Multimeter
Bert Vermeulen [Wed, 12 Jun 2013 14:04:23 +0000 (16:04 +0200)]
cem-dt-885x: Send last measurement at normal rate in hold mode
The device only sends the "hold" token otherwise, which clashes somewhat
with other devices. This makes the device more predictable for frontends.
Bert Vermeulen [Wed, 12 Jun 2013 13:45:37 +0000 (15:45 +0200)]
cem-dt-885x: Hold off measurements in max/min hold mode
Bert Vermeulen [Wed, 12 Jun 2013 11:10:56 +0000 (13:10 +0200)]
cem-dt-885x: Live SPL acquisition
Bert Vermeulen [Tue, 11 Jun 2013 21:33:25 +0000 (23:33 +0200)]
cem-dt-885x: Flesh out driver, add scan functionality
Bert Vermeulen [Fri, 7 Jun 2013 23:12:10 +0000 (01:12 +0200)]
cem-dt-885x: Initial driver skeleton.
Uwe Hermann [Tue, 11 Jun 2013 16:55:47 +0000 (18:55 +0200)]
scanalogic2: Only print actual state changes in the log.
Uwe Hermann [Tue, 11 Jun 2013 16:55:47 +0000 (18:55 +0200)]
scanalogic2: Replace %i with %s where needed.
Uwe Hermann [Tue, 11 Jun 2013 16:55:47 +0000 (18:55 +0200)]
scanalogic2: Shorten a few function name prefixes.
The driver-private helper functions in protocol.c can have a shorter
prefix to make the code look nicer.
Uwe Hermann [Tue, 11 Jun 2013 16:55:47 +0000 (18:55 +0200)]
scanalogic2: Cosmetics, whitespace, typos, etc.
Marc Schink [Mon, 10 Jun 2013 08:10:13 +0000 (10:10 +0200)]
Initial driver for IKALOGIC Scanalogic-2
Marc Schink [Fri, 7 Jun 2013 18:34:40 +0000 (20:34 +0200)]
ikalogic-scanalogic2: Initial driver skeleton.
Uwe Hermann [Sun, 2 Jun 2013 14:54:31 +0000 (16:54 +0200)]
ols/link-mso19: Consistency fixes.
Use the same setup/ordering/naming for the cleanup/dev_clear functions
as all other drivers do.
Uwe Hermann [Sun, 2 Jun 2013 14:43:26 +0000 (16:43 +0200)]
demo: Use std_dev_clear().
Uwe Hermann [Fri, 31 May 2013 14:09:57 +0000 (16:09 +0200)]
s/clear_instances/dev_clear/.
Consistently use the same name for the dev_clear() API callback
everywhere.
Uwe Hermann [Fri, 31 May 2013 13:46:57 +0000 (15:46 +0200)]
std: Drop hw_ from function names.
The per-driver API calls no longer have a hw_ prefix (e.g. hw_init()
became init() and so on), so drop the 'hw_' from the std versions
for those API callbacks too.
Uwe Hermann [Fri, 31 May 2013 13:33:58 +0000 (15:33 +0200)]
asix-sigma: Use std_dev_clear().
Uwe Hermann [Fri, 31 May 2013 13:28:43 +0000 (15:28 +0200)]
alsa: Use std_dev_clear().
Uwe Hermann [Fri, 31 May 2013 13:19:53 +0000 (15:19 +0200)]
rigol-ds1xx2: Use std_dev_clear().
Uwe Hermann [Fri, 31 May 2013 13:18:47 +0000 (15:18 +0200)]
hantek-dso: Simplify cleanup().
Uwe Hermann [Fri, 31 May 2013 13:18:22 +0000 (15:18 +0200)]
nexus-osciprime: Use std_dev_clear().
Uwe Hermann [Fri, 31 May 2013 12:25:33 +0000 (14:25 +0200)]
lascar-el-usb: Use std_dev_clear().
Uwe Hermann [Fri, 31 May 2013 12:20:34 +0000 (14:20 +0200)]
fluke-dmm: Use std_dev_clear().
Uwe Hermann [Fri, 31 May 2013 12:17:38 +0000 (14:17 +0200)]
colead-slm: Use std_dev_clear().
Uwe Hermann [Fri, 31 May 2013 12:13:20 +0000 (14:13 +0200)]
agilent-dmm: Use std_dev_clear().
Uwe Hermann [Fri, 31 May 2013 12:10:59 +0000 (14:10 +0200)]
victor-dmm: Use std_dev_clear().
Uwe Hermann [Fri, 31 May 2013 12:00:30 +0000 (14:00 +0200)]
brymen-dmm: Use std_dev_clear().
Uwe Hermann [Tue, 21 May 2013 18:54:42 +0000 (20:54 +0200)]
csv output: Fix incorrect ordering of the probes.
The comment for the CSV output module says probes are ordered e.g.
0,1,2,3, but the actual values were in the 3,2,1,0 order.
We're fixing this by making the order of the probe values 0,1,2,3 too
for now, but this will become a configurable option later on.
Thanks Patrick Servello <redacted> for the patch.
Uwe Hermann [Fri, 10 May 2013 18:59:42 +0000 (20:59 +0200)]
Always link against the math library.
This fixes bug #115.
Uwe Hermann [Fri, 10 May 2013 18:31:25 +0000 (20:31 +0200)]
session_driver: Fix return codes, cosmetics.
Uwe Hermann [Fri, 10 May 2013 17:37:54 +0000 (19:37 +0200)]
Use consistent API callback function names.
This now matches what the 'new-driver' tool generates.
Uwe Hermann [Fri, 10 May 2013 17:16:25 +0000 (19:16 +0200)]
zeroplus: Properly set inst_type to SR_INST_USB.
Uwe Hermann [Fri, 10 May 2013 17:06:47 +0000 (19:06 +0200)]
zeroplus: Use std_dev_clear().
Uwe Hermann [Fri, 10 May 2013 16:59:46 +0000 (18:59 +0200)]
uni-t-dmm: Use std_dev_clear().
Uwe Hermann [Fri, 10 May 2013 16:53:42 +0000 (18:53 +0200)]
serial-dmm: Use std_dev_clear().
Uwe Hermann [Fri, 10 May 2013 16:40:13 +0000 (18:40 +0200)]
chronovu-la8: Use std_dev_clear().
Uwe Hermann [Fri, 10 May 2013 16:30:32 +0000 (18:30 +0200)]
Drop some lines that are no longer needed.
Uwe Hermann [Fri, 10 May 2013 15:56:53 +0000 (17:56 +0200)]
tondaj-sl-814: Use std_dev_clear().
Uwe Hermann [Fri, 10 May 2013 15:54:53 +0000 (17:54 +0200)]
mic-985xx: Use std_dev_clear().
Uwe Hermann [Wed, 8 May 2013 17:49:23 +0000 (19:49 +0200)]
Use consistent naming for internal libtool helper libs.
This now also matches what the 'new-driver' tool generates.
Uwe Hermann [Wed, 8 May 2013 17:33:30 +0000 (19:33 +0200)]
Use consistent HW_ name prefixes everywhere.
Older drivers used LA_* previously, we now use HW_* everywhere though.
Uwe Hermann [Sun, 5 May 2013 15:14:20 +0000 (17:14 +0200)]
device.c: Add missing @since markers.
Also, add Doxygen comments for functions which don't have any yet.
Uwe Hermann [Wed, 8 May 2013 14:41:18 +0000 (16:41 +0200)]
Doxyfile: Set version to "unreleased development snapshot".
Uwe Hermann [Wed, 8 May 2013 14:40:45 +0000 (16:40 +0200)]
Re-enable link-mso19 and nexus-osciprime drivers.
Bert Vermeulen [Mon, 6 May 2013 18:44:26 +0000 (20:44 +0200)]
fx2lafw: Fix memory leak
Bert Vermeulen [Sun, 5 May 2013 22:42:18 +0000 (00:42 +0200)]
ols: Code cleanup
This also fixes a memory leak.
Bert Vermeulen [Sun, 5 May 2013 22:40:17 +0000 (00:40 +0200)]
Fix various memory leaks
Bert Vermeulen [Sun, 5 May 2013 22:36:50 +0000 (00:36 +0200)]
std: Fix memory leak, code cleanup
Uwe Hermann [Thu, 25 Apr 2013 17:01:54 +0000 (19:01 +0200)]
Drop link-mso19/nexus-osciprime in preparation for release.
These two drivers are currently unfinished and don't work, so disable
and "unhook" them for now in preparation of the next libsigrok release.
They're still in the git repository, but not hooked up to the build
system, so that they won't get detected or built, and also don't end up
in the release tarball.
Since link-mso19 is the only driver that currently requires libudev,
drop any reference to that, too.
It should be relatively easy to apply this patch in reverse after the
release to bring back both drivers.
Uwe Hermann [Sat, 4 May 2013 13:55:11 +0000 (15:55 +0200)]
Doxyfile: Set version number to 0.2.0.
Uwe Hermann [Sat, 4 May 2013 13:22:45 +0000 (15:22 +0200)]
udev rules file: Add entry for the ZEROPLUS LAP-16128U.
Uwe Hermann [Sat, 4 May 2013 13:17:50 +0000 (15:17 +0200)]
NEWS: Minor update.
Uwe Hermann [Sat, 4 May 2013 13:12:20 +0000 (15:12 +0200)]
Fix libsigrok lib version (current:revision:age).
The last release (libsigrok 0.1.1) had a lib version of 0:0:0.
This release thus gets 1:0:0 according to the libtool manual guidelines.
Uwe Hermann [Fri, 3 May 2013 22:07:34 +0000 (00:07 +0200)]
uni-t-dmm: Add missing SR_CONF_LIMIT_MSEC support.
Uwe Hermann [Fri, 3 May 2013 19:59:32 +0000 (21:59 +0200)]
s/DRIVER_LOG_DOMAIN/LOG_PREFIX/.
This is more correct anyway, and also a bit shorter and more readable.
Uwe Hermann [Fri, 3 May 2013 12:03:49 +0000 (14:03 +0200)]
Minor whitespace fixes.
Uwe Hermann [Thu, 2 May 2013 21:37:23 +0000 (23:37 +0200)]
README.devices: Document how to make some DMMs log.
Uwe Hermann [Thu, 2 May 2013 17:03:47 +0000 (19:03 +0200)]
NEWS: Various updates and minor fixes.
Uwe Hermann [Thu, 2 May 2013 15:37:55 +0000 (17:37 +0200)]
Fix the build when libusb is not available.
Thanks Simon Richter <redacted> for reporting.
Bert Vermeulen [Wed, 1 May 2013 12:54:44 +0000 (14:54 +0200)]
Deal with uninitialized drivers
Uwe Hermann [Wed, 1 May 2013 01:16:47 +0000 (03:16 +0200)]
serial-dmm: Add Tecpel DMM-8060 support.
Uwe Hermann [Wed, 1 May 2013 01:13:15 +0000 (03:13 +0200)]
serial-dmm: Add Tecpel DMM-8061 support.
Uwe Hermann [Wed, 1 May 2013 01:04:46 +0000 (03:04 +0200)]
uni-t-dmm: Add Tecpel DMM-8060 support.
This is _very_ likely to be a rebadged Voltcraft VC-820, treating as such.
Uwe Hermann [Wed, 1 May 2013 01:00:08 +0000 (03:00 +0200)]
uni-t-dmm: Add Tecpel DMM-8061 support.
Uwe Hermann [Wed, 1 May 2013 00:10:56 +0000 (02:10 +0200)]
fs9721: Factor out common code from serial-dmm.
These functions are FS9721 specific (and DMM specific), and can be used
from various drivers (e.g. serial-dmm or uni-t-dmm or possibly others).
Uwe Hermann [Tue, 30 Apr 2013 23:56:30 +0000 (01:56 +0200)]
uni-t-dmm/serial-dmm: Handle Voltcraft VC-840 temperature.
Uwe Hermann [Tue, 30 Apr 2013 23:02:46 +0000 (01:02 +0200)]
fs9922: Fix beep mode.
Uwe Hermann [Tue, 30 Apr 2013 23:00:54 +0000 (01:00 +0200)]
fs9922: Fix diode mode parsing.
Uwe Hermann [Tue, 30 Apr 2013 18:28:29 +0000 (20:28 +0200)]
uni-t-dmm: Fix incorrect UNI-T UT61D baudrate.
Uwe Hermann [Tue, 30 Apr 2013 18:27:04 +0000 (20:27 +0200)]
uni-t-dmm: Add support for the Voltcraft VC-840.
This DMM is already supported via the serial-dmm driver when using the
RS232 cable. The uni-t-dmm support makes it usable with the USB/HID
cable too.
Uwe Hermann [Mon, 29 Apr 2013 18:23:21 +0000 (20:23 +0200)]
uni-t-dmm: Add support for the UNI-T UT61E.
This DMM is already supported via the serial-dmm driver when using the
RS232 cable. The uni-t-dmm support makes it usable with the USB/HID
cable too.
Uwe Hermann [Mon, 29 Apr 2013 18:15:02 +0000 (20:15 +0200)]
serial-dmm: Add support for the UNI-T UT61D.
This DMM is already supported via the uni-t-dmm driver when using the
USB/HID cable. The serial-dmm support makes it usable with the RS232
cable too.
Uwe Hermann [Sun, 28 Apr 2013 06:13:15 +0000 (08:13 +0200)]
uni-t-dmm: Use sr_dev_inst to store connection handle.
Uwe Hermann [Sun, 28 Apr 2013 06:01:51 +0000 (08:01 +0200)]
brymen-dmm: Use sr_dev_inst to store connection handle.
Bert Vermeulen [Tue, 30 Apr 2013 14:03:37 +0000 (16:03 +0200)]
output: Use sr_config_get() wrapper
This obviates the need for a valid driver, and thus makes converting
from any (non-sr) input format to any output format possible; the only
thing missing is the samplerate.
Fixes bug 105.