Stefan Brüns [Sun, 1 May 2016 03:20:39 +0000 (05:20 +0200)]
scpi: Add support for arbitray/definite length block data retrieval
Binary block data is specified in IEEE 488.2. First character is '#',
followed by a single ascii digit denoting the the number of digits needed
for the length specification. Length is given in bytes.
This allows drivers to replace retrieval of comma separated ASCII values
with binary formats. See bug #791.
Stefan Brüns [Fri, 22 Apr 2016 22:33:45 +0000 (00:33 +0200)]
strutil: add method to get an sr_rational from a string
The method accepts strings with numbers in scientific or normal notation,
e.g. -1.25 or 3.37e-6. The numeric range is limited by the sr_rational
range, i.e +-9.2e18, resolution is ~19 digits.
Diego Asanza [Wed, 4 May 2016 17:28:37 +0000 (19:28 +0200)]
dslogic: Add support for voltage threshold
The DSLogic provides two FPGA images: one for 3.3V and the other for 5V logic.
The DSLogic Pro allows to set an arbitrary voltage threshold via USB command.
This commit adds support for the DSLogic to load the FPGA image according to
an user-selectable voltage threshold.
For the DSLogic Pro, one of two fixed voltage thresholds are set, depending on
the user-selected value.
Tested with DSLogic and DSLogic Pro.
Signed-off-by: Diego Asanza <redacted> Tested-by: Andrew Bradford <redacted>
demo: Handle the case when zero analog or logic channels were requested
The demo device has support for specifying the number of analog and logic
channels it should have. Currently this does not work correctly if one of
them is set to zero. Being able to set the number of channels to zero for
one of the channel types is quite useful for corner case testing though.
Make the following modifications to handle it correctly:
1) If the channel count is zero no channel group for that channel type
should be created since a channel group needs at least one channel.
2) Drop the check if logic_unitsize is less or equal to zero in
prepare_data() since this condition will always be true if the number of
logic channels is zero and it is not possible to create a demo device with
only analog channels.
zip_append_analog() does not free most of the memory it allocates. Address
this by moving all sanity checks that do not rely on anything else at the
beginning of the function before any allocations are done. And then make
sure to properly free all allocated memory on all paths leaving the
function.
srzip: Fix handling of analog channels with index 0
0 is a valid index for a channel. Using it as the value for the terminating
entry of analog_index_map causes zip_append_analog() to falsely assume that
no channel was found when a packet for a channel with index 0 was received.
This prevents the data for the channel to be added to the sigrok session
file.
Instead use -1, which is not a valid channel index, as
the terminating entry value.
Marvin Schmidt [Fri, 13 May 2016 10:27:14 +0000 (12:27 +0200)]
build: Replace AX_CXX_COMPILE_STDCXX_11 with latest AX_CXX_COMPILE_STDCXX
The former appended the necessary switch to enable C++11 to the CXXFLAGS
whereas AX_CXX_COMPILE_STDCXX appends it to CXX which has the benefit
that all C++ sources are compiled using the same C++ standard. Therefore
it is no longer necessary to manually hardcode '-std=c++11' anywhere
like we did in the Ruby bindings linker command and assures that the
compilation of them is done with C++11 support as well.
Marvin Schmidt [Fri, 13 May 2016 15:44:12 +0000 (17:44 +0200)]
build: Fix distribution of Ruby bindings
The bindings file was not listed in EXTRA_DIST and therefore not
distributed. We also need to provide an target to uninstall the Ruby
bindings and add it to UNINSTALL_EXTRA in order to make `make distcheck`
happy.
Now that the signature of std_init() matches that of the driver init()
callback we can remove all wrapper functions around std_init() and use it
directly as the init() callback.
std_init(): Drop check if pass in driver is non-NULL
std_init() checks if the pass in struct sr_dev_driver is non-NULL and
prints a error message and returns an error if it is NULL.
std_init() is exclusively called from driver init() callbacks for which the
core already checks if the struct sr_dev_driver is non-NULL before invoking
the callback. This means the check in std_init() will always evaluate to
false. So drop this check.
This also means that the prefix parameter that was used in the error
message is no longer needed and can be removed from the function signature.
Doing so will make the std_init() function signature identical to the
init() callback signature which will allow to directly use it as such.
Match std_init() parameter order to the driver init() callback
The std_init() callback has the order of the first two paramters opposite
to the init() callback. This is primarily due to historical development.
Since the std_init() function is usually called from a driver's init()
callback aligning the order will allow direct register pass through rather
than having to swap them around. It also allow to eventually use the
std_init() function directly as the init() callback.
The zeroplus-logic-cube driver uses libusb_get_device_list() but neglects
to call the matching libusb_device_list_free() on the error path. This will
leak the memory allocated for the list as well as all the devices.
To address the issue use sr_usb_open() instead of open-coding its
functionality. sr_usb_open() correctly handles freeing the device list.
The issue was discovered using the following coccinelle semantic patch:
// <smpl>
@@
identifier devlist;
expression ctx, ret;
statement S;
@@
(
libusb_get_device_list(ctx, &devlist);
|
ret = libusb_get_device_list(ctx, &devlist);
if (ret < 0) S
)
... when != libusb_free_device_list(devlist, ...)
*return ...;
// </smpl>
The victor-dmm driver uses libusb_get_device_list() but neglects to call
the matching libusb_device_list_free() on the error path of libusb_open().
This will leak the memory allocated for the list as well as all the
devices.
To address the issue use sr_usb_open() instead of open-coding its
functionality. sr_usb_open() correctly handles freeing the device list.
The issue was discovered using the following coccinelle semantic patch:
// <smpl>
@@
identifier devlist;
expression ctx, ret;
statement S;
@@
(
libusb_get_device_list(ctx, &devlist);
|
ret = libusb_get_device_list(ctx, &devlist);
if (ret < 0) S
)
... when != libusb_free_device_list(devlist, ...)
*return ...;
// </smpl>
The testo driver uses libusb_get_device_list() but neglects to call the
matching libusb_device_list_free() on the error path. This will leak the
memory allocated for the list as well as all the devices.
To address the issue use sr_usb_open() instead of open-coding its
functionality. sr_usb_open() correctly handles freeing the device list.
The issue was discovered using the following coccinelle semantic patch:
// <smpl>
@@
identifier devlist;
expression ctx, ret;
statement S;
@@
(
libusb_get_device_list(ctx, &devlist);
|
ret = libusb_get_device_list(ctx, &devlist);
if (ret < 0) S
)
... when != libusb_free_device_list(devlist, ...)
*return ...;
// </smpl>
lascar-el-usb: lascar_scan(): Fix USB device list leak
lascar_scan() calls libusb_get_device_list() but never the matching
libusb_free_device_list(). This will leak the memory allocated for the
device list as well as all the devices. To fix this add the missing
libusb_free_device_list().
While we are at it also make sure to handle errors returned by
libusb_get_device_list().
The issue was discovered using the following coccinelle semantic patch:
// <smpl>
@@
identifier devlist;
expression ctx, ret;
statement S;
@@
(
libusb_get_device_list(ctx, &devlist);
|
ret = libusb_get_device_list(ctx, &devlist);
if (ret < 0) S
)
... when != libusb_free_device_list(devlist, ...)
*return ...;
// </smpl>
Some drivers check in some of their driver callbacks if the driver has been
initialized and return an error if it has not.
For the scan() callback the sigrok core checks if the driver has been
initialized and if not returns an error. So it is not possible that the
scan() callback gets called if the driver is not initialized. Without the
scan() callback succeeding it is not possible to get a reference to a
device which is associated with the driver, so it is not possible that any
of the device specific callbacks is called without the driver first being
initialized either.
In conclusion these checks are not necessary since they never evaluate to
true and can be dropped. If they should ever become necessary they should
be done in the sigrok core so all drivers and all callbacks are equally
handled.
Drop SR_CONF_SET flag from SR_CONF_CONTINUOUS options
SR_CONF_CONTINUOUS is a capability option indicating whether a device
supports continuous capture or not. If the option exists the device
supports continuous capture and otherwise it doesn't. There is no value
associated with it and hence setting the SR_CONF_SET flag is nonsensical.
None of the drivers which set SR_CONF_SET for SR_CONF_CONTINUOUS handle it
in their config_set() callback and return an error if an application tried
to perform a config_set() operation for SR_CONF_CONTINUOUS.
Simply remove the SR_CONF_SET flag from all SR_CONF_CONTINUOUS options.
Introduce standard implementation of the dev_list() callback
Every single hardware driver has the very same implementation of the
dev_list() callback. Put this into a helper function in the standard helper
library and use it throughout the drivers. This reduces boiler-plate code
by quite a bit.
If a driver does not implement a dev_clear() callback the core will
automatically call std_dev_clear(di, NULL). Remove all driver dev_clear()
implementations that are identical to default. This reduces the amount of
boiler-plate code.
std_init() allocates a drv_context struct which needs to be freed by the
driver in its cleanup struct. But the vast majority of drivers does never
does this causing memory leaks.
Instead of addressing the issue by manually adding code to free the struct
to each driver introduce a new helper function std_cleanup() that takes
care of this. In addition to freeing the drv_context struct std_cleanup()
also invokes sr_dev_clear() which takes care of freeing all devices
attached to the driver.
Combining both operations in the same helper function allows to use
std_cleanup() as the cleanup callback for all existing drivers, which
reduces the amount of boiler-plate code quite a bit.
All drivers are updated to use the new helper function.
Devices for the scpi-pps driver do have additional data attached to it that
needs to be freed when the device is freed. While the driver gets it right
for the cleanup() callback it does not for the dev_clear() callback. This
will cause memory leaks when sr_dev_clear() is called for this driver.
To fix this let the dev_clear() free the additional data.
Devices for the deree-de5000 driver do have additional data attached to it
that needs to be freed when the device is freed. While the driver gets it
right for the cleanup() callback it does not implement a dev_clear()
callback, so the default dev_clear() implementation is used which will not
free the additional data. This will cause memory leaks when sr_dev_clear()
is called for this driver.
To fix this provide a dev_clear() implementation that frees the additional
data.
Devices for the demo driver do have additional data attached to it that
needs to be freed when the device is freed. While the driver gets it right
for the cleanup() callback it does not implement a dev_clear() callback, so
the default dev_clear() implementation is used which will not free the
additional data. This will cause memory leaks when sr_dev_clear() is called
for this driver.
To fix this provide a dev_clear() implementation that frees the additional
data.
baylibre-acme: Properly free GErrors returned by g_file_get_contents()
When g_file_get_contents() encounters an error a new GError will be
allocated and passed back to the application. The application is
responsible for freeing this GError.
The baylibre-acme driver currently does not do this and as a result leaks
memory during the scan process when no device is found.
Add the missing g_error_free() invocations to fix the issue.
Make sure to free the FTDI device list and the FTDI context in scan_all()
otherwise memory leaks can be observed. Also make sure to free the FTDI
context in scan_device() on the error path.
Uwe Hermann [Sat, 26 Mar 2016 18:45:04 +0000 (19:45 +0100)]
Factor out std_session_send_df_end() helper.
This makes the code shorter, simpler and more consistent, and also
ensures that the (same) debug messages are always emitted and the
packet.payload field is consistently set to NULL always, etc.
Joel Holdsworth [Sun, 24 Apr 2016 18:38:12 +0000 (20:38 +0200)]
fx2lafw: Add CTL2 clocking command flag to header
The USBee AX hardware needs a sampling clock that is lower than
the 30MHz or 48MHz that the FX2 has to offer. This flag will enable
clocking via the CTL2 pin that is an even divisor of the main clock.
hp-3457a: Implement AC, ACDC, and four-wire resistance modes
The driver did not look at the mq_flags provided with the
SR_CONF_MEASURED_QUANTITY key, and it defaulted to DC measurements.
Use the second member of the tuple provided by the config key, which
represents the flags for the measurement, and set the instrument's
measurement mode accordingly.
On the high-end bench multimeters, resistance can be measured with a
kelvin connection as well as the more common two wire method. Provide
a flag which can indicate if four-wire mode is used.
projects / libsigrok.git / log