From: Carlos Diaz Date: Mon, 13 Apr 2020 13:44:43 +0000 (-0500) Subject: Start Spanish (Mexico) translation X-Git-Url: https://sigrok.org/gitaction?a=commitdiff_plain;h=f9bcdb9a46d6839cdf5894af00b5cccd70fb88cc;p=pulseview.git Start Spanish (Mexico) translation --- diff --git a/l10n/mx.ts b/l10n/mx.ts new file mode 100644 index 00000000..a03b5a86 --- /dev/null +++ b/l10n/mx.ts @@ -0,0 +1,1512 @@ + + + + + Application + + + Some parts of the application may still use the previous language. Re-opening the affected windows or restarting the application will remedy this. + Algunas partes de la aplicación aún pueden usar el idioma anterior. Volver a abrir las ventanas afectadas o reiniciar la aplicación solucionará esto. + + + + QApplication + + + Error when scanning device driver '%1': %2 + Error al escanear el controlador del dispositivo '%1': %2 + + + + Querying config key %1 is not allowed + No se permite consultar la key de configuración %1 + + + + Querying config key %1 resulted in %2 + La consulta de la clave de configuración %1 resultó en %2 + + + + Unknown type supplied when attempting to query %1 + Tipo desconocido proporcionado al intentar consultar %1 + + + + QHexView + + + No data available + Datos no disponibles + + + + QObject + + + Stack trace of previous crash: + Stack trace de crash previo: + + + + Don't show this message again + No mostrar este mensaje de nuevo + + + + When %1 last crashed, it created a stack trace. +A human-readable form has been saved to disk and was written to the log. You may access it from the settings dialog. + + + + + Cancel + Cancelar + + + + Scanning for devices that driver %1 can access... + + + + + pv::MainWindow + + + PulseView + PulseView + + + + Decoder Selector + Selección de decoder + + + + Session %1 + Sesión %1 + + + + Create New Session + Crear Nueva Sesión + + + + Start/Stop Acquisition + + + + + Settings + Configuraciones + + + + Reload + Recargar + + + + + Run + Ejecutar + + + + Stop + Detener + + + + + + Confirmation + Confirmación + + + + There is unsaved data. Close anyway? + + + + + + This session contains unsaved data. Close it anyway? + + + + + pv::Session + + + Failed to select device + + + + + Failed to open device + + + + + Error + Error + + + + Unexpected input format: %s + + + + + Failed to load %1 + + + + + No active device set, can't start acquisition. + + + + + No channels enabled. + + + + + Out of memory, acquisition stopped. + + + + + Can't handle more than 64 logic channels. + + + + + pv::StoreSession + + + Can't save logic channel without data. + + + + + Can't save analog channel without data. + + + + + No channels enabled. + + + + + Can't save range without sample data. + + + + + + Error while saving: + + + + + pv::data::DecodeSignal + + + No decoders + + + + + There are no channels assigned to this decoder + + + + + One or more required channels have not been specified + + + + + No input data + + + + + Decoder reported an error + + + + + Failed to create decoder instance + + + + + pv::data::SignalBase + + + Signal average + + + + + 0.9V (for 1.8V CMOS) + + + + + 1.8V (for 3.3V CMOS) + + + + + 2.5V (for 5.0V CMOS) + + + + + 1.5V (for TTL) + + + + + Signal average +/- 15% + + + + + 0.3V/1.2V (for 1.8V CMOS) + + + + + 0.7V/2.5V (for 3.3V CMOS) + + + + + 1.3V/3.7V (for 5.0V CMOS) + + + + + 0.8V/2.0V (for TTL) + + + + + pv::dialogs::Connect + + + &Scan for devices using driver above + + + + + Connect to Device + + + + + Step 1: Choose the driver + + + + + &USB + + + + + Serial &Port + + + + + &TCP/IP + + + + + Protocol: + + + + + Step 2: Choose the interface + + + + + Step 3: Scan for devices + + + + + Step 4: Select the device + + + + + pv::dialogs::Settings + + + + General + General + + + + Views + + + + + + Decoders + + + + + About + + + + + Logging + + + + + User interface language + + + + + User interface theme + + + + + (You may need to restart PulseView for all UI elements to update) + + + + + System Default + + + + + Qt widget style + + + + + (Dark themes look best with the Fusion style) + + + + + Save session &setup along with .sr file + + + + + Trace View + + + + + Use colored trace &background + + + + + Constantly perform &zoom-to-fit during acquisition + + + + + Perform a zoom-to-&fit when acquisition stops + + + + + Show time zero at the trigger + + + + + Always keep &newest samples at the right edge during capture + + + + + Show data &sampling points + + + + + Fill high areas of logic signals + + + + + Color to fill high areas of logic signals with + + + + + Show analog minor grid in addition to div grid + + + + + Highlight mouse cursor using a vertical marker line + + + + + + + pixels + + + + + Maximum distance from edges before markers snap to them + + + + + Color to fill cursor area with + + + + + None + + + + + Background + + + + + Dots + + + + + Conversion threshold display mode (analog traces only) + + + + + Default analog trace div height + + + + + Default logic trace height + + + + + Allow configuration of &initial signal state + + + + + Always show all &rows, even if no annotation is visible + + + + + Annotation export format + + + + + %s = sample range; %d: decoder name; %r: row name; %c: class name + + + + + %1: longest annotation text; %a: all annotation texts; %q: use quotation marks + + + + + %1<br /><a href="http://%2">%2</a> + + + + + GNU GPL, version 3 or later + + + + + Versions, libraries and features: + + + + + Firmware search paths: + + + + + Protocol decoder search paths: + + + + + Supported hardware drivers: + + + + + Supported input formats: + + + + + Supported output formats: + + + + + Supported protocol decoders: + + + + + Log level: + + + + + lines + + + + + Length of background buffer: + + + + + &Save to File + + + + + &Pop out + + + + + You selected a dark theme. +Should I set the user-adjustable colors to better suit your choice? + +Please keep in mind that PulseView may need a restart to display correctly. + + + + + You selected a bright theme. +Should I set the user-adjustable colors to better suit your choice? + +Please keep in mind that PulseView may need a restart to display correctly. + + + + + Save Log + + + + + Log Files (*.txt *.log);;All Files (*) + + + + + Success + + + + + Log saved to %1. + + + + + Error + + + + + File %1 could not be written to. + + + + + %1 Log + + + + + pv::dialogs::StoreProgress + + + Saving... + + + + + Cancel + + + + + Failed to save session. + + + + + pv::popups::Channels + + + + + + All + + + + + + Logic + + + + + + Analog + + + + + Named + + + + + Unnamed + + + + + Changing + + + + + Non-changing + + + + + Disable: + + + + + Enable: + + + + + + None + + + + + pv::prop::Bool + + + + Querying config key %1 resulted in %2 + La consulta de la clave de configuración %1 resultó en %2 + + + + pv::prop::Double + + + + Querying config key %1 resulted in %2 + La consulta de la clave de configuración %1 resultó en %2 + + + + pv::prop::Enum + + + + Querying config key %1 resulted in %2 + La consulta de la clave de configuración %1 resultó en %2 + + + + pv::prop::Int + + + + Querying config key %1 resulted in %2 + La consulta de la clave de configuración %1 resultó en %2 + + + + pv::prop::String + + + + Querying config key %1 resulted in %2 + La consulta de la clave de configuración %1 resultó en %2 + + + + pv::subwindows::decoder_selector::DecoderCollectionModel + + + Decoder + Decoder + + + + Name + Nombre + + + + ID + ID + + + + All Decoders + Todos los decoders + + + + pv::subwindows::decoder_selector::SubWindow + + + Select a decoder to see its description here. + Seleccione un decoder para ver su descripción aquí. + + + + , %1 + , %1 + + + + <p align='right'>Tags: %1</p> + + + + + Protocol decoder <b>%1</b> requires input type <b>%2</b> which several decoders provide.<br>Choose which one to use:<br> + + + + + Choose Decoder + Elige Decoder + + + + pv::toolbars::MainBar + + + New &View + + + + + &Open... + + + + + Restore Session Setu&p... + + + + + &Save As... + + + + + Save Selected &Range As... + + + + + Save Session Setu&p... + + + + + &Export + + + + + &Import + + + + + &Connect to Device... + + + + + Add protocol decoder + + + + + Configure Device + + + + + Configure Channels + + + + + Failed to get sample rate list: + + + + + Failed to get sample rate: + + + + + Failed to get sample limit list: + + + + + Failed to configure samplerate: + + + + + Failed to configure sample count: + + + + + Missing Cursors + + + + + You need to set the cursors before you can save the data enclosed by them to a session file (e.g. using the Show Cursors button). + + + + + Invalid Range + + + + + The cursors don't define a valid range of samples. + + + + + %1 files + + + + + + All Files + + + + + + Save File + + + + + Export %1 + + + + + %1 files + + + + + Import File + + + + + Import %1 + + + + + + Open File + + + + + sigrok Sessions (*.sr);;All Files (*) + + + + + + PulseView Session Setups (*.pvs);;All Files (*) + + + + + Total sampling time: %1 + + + + + pv::views::decoder_binary::View + + + Decoder: + + + + + Show data as + + + + + Hexdump + + + + + &Save... + + + + + + Save Binary Data + + + + + Binary Data Files (*.bin);;All Files (*) + + + + + + Error + + + + + + File %1 could not be written to. + + + + + Hex Dumps (*.txt);;All Files (*) + + + + + pv::views::trace::AnalogSignal + + + Number of pos vertical divs + + + + + Number of neg vertical divs + + + + + pixels + + + + + Div height + + + + + V/div + + + + + Vertical resolution + + + + + Autoranging + + + + + none + + + + + to logic via threshold + + + + + to logic via schmitt-trigger + + + + + Conversion + + + + + Conversion threshold(s) + + + + + analog + + + + + converted + + + + + analog+converted + + + + + Show traces for + + + + + pv::views::trace::Cursor + + + Disable snapping + Deshabilita snapping + + + + pv::views::trace::CursorPair + + + Display interval + Muestra intervalo + + + + Display frequency + Muestra frecuencia + + + + Display samples + Muestra samples + + + + pv::views::trace::DecodeTrace + + + <p><i>No decoders in the stack</i></p> + + + + + <i>* Required channels</i> + + + + + Stack Decoder + + + + + Stack a higher-level decoder on top of this one + + + + + Delete + + + + + Resume decoding + + + + + Pause decoding + + + + + Copy annotation text to clipboard + + + + + Export all annotations + + + + + Export all annotations for this row + + + + + Export all annotations, starting here + + + + + Export annotations for this row, starting here + + + + + Export all annotations within cursor range + + + + + Export annotations for this row within cursor range + + + + + %1: +%2 + + + + + <b>%1</b> (%2) %3 + + + + + Export annotations + + + + + Text Files (*.txt);;All Files (*) + + + + + Error + + + + + File %1 could not be written to. + + + + + Show this row + + + + + Show All + + + + + Hide All + + + + + pv::views::trace::Flag + + + Text + + + + + Delete + + + + + Disable snapping + + + + + pv::views::trace::Header + + + Group + Grupo + + + + pv::views::trace::LogicSignal + + + No trigger + + + + + Trigger on rising edge + + + + + Trigger on high level + + + + + Trigger on falling edge + + + + + Trigger on low level + + + + + Trigger on rising or falling edge + + + + + pixels + + + + + Trace height + + + + + Trigger + + + + + pv::views::trace::Ruler + + + Create marker here + + + + + Set as zero point + + + + + Reset zero point + + + + + Disable mouse hover marker + + + + + Enable mouse hover marker + + + + + pv::views::trace::Signal + + + Name + Nombre + + + + Disable + Deshabilitar + + + + pv::views::trace::StandardBar + + + Zoom &In + + + + + Zoom &Out + + + + + Zoom to &Fit + + + + + Show &Cursors + + + + + Display last segment only + + + + + Display last complete segment only + + + + + Display a single segment + + + + + pv::views::trace::TimeMarker + + + Time + + + + + pv::views::trace::Trace + + + Create marker here + + + + + Color + + + + + Name + + + + + pv::views::trace::TraceGroup + + + Ungroup + + + + + pv::widgets::DecoderGroupBox + + + Show/hide this decoder trace + + + + + Delete this decoder trace + + + + + pv::widgets::DeviceToolButton + + + + <No Device> + <Sin dispositivo> + + + + pv::widgets::ExportMenu + + + Export %1... + Exporta %1... + + + + pv::widgets::ImportMenu + + + Import %1... + Importa %1... + + +