From: Iztok Jeras Date: Mon, 2 Jul 2012 21:54:52 +0000 (+0200) Subject: some white space changes, changed handling of normal/overdrive timing, annotations... X-Git-Tag: libsigrokdecode-0.1.1~61 X-Git-Url: https://sigrok.org/gitaction?a=commitdiff_plain;h=f4d0363dc492cebc3bc37adfbffaff6fafd55ff4;p=libsigrokdecode.git some white space changes, changed handling of normal/overdrive timing, annotations now show duration --- diff --git a/decoders/onewire/__init__.py b/decoders/onewire/__init__.py index b58dde7..c43dabc 100644 --- a/decoders/onewire/__init__.py +++ b/decoders/onewire/__init__.py @@ -29,6 +29,13 @@ layered, the provided parser decodes the next layers: The higher layers (transport, presentation) are not decoded, since they are mostly device specific and it would take a lot of code to interpret them. +Sample rate: +A high enough sample rate is required to properly detect all the elements of +the protocol. A lower sample rate can be used if the master does not use +overdrive communication speed. The next minimal values should be used: +- overdrive available: 2MHz minimum, 5MHz suggested +- overdrive not available: 400kHz minimum, 1MHz suggested + Probes: 1-Wire requires a single signal, but some master implementations might have a separate signal use to deliver power to the bus during temperature conversion @@ -60,10 +67,10 @@ If link layer annotations are shown, possible issues with sample rate and sample timing are also shown. TODO: -- fix annotations to have event duration instead of begin end time - add CRC checks for network layer - add transport layer code - review link layer code, to check for protocol correctness +- define output protocol ''' from .onewire import * diff --git a/decoders/onewire/onewire.py b/decoders/onewire/onewire.py index b8e5041..6e5344f 100644 --- a/decoders/onewire/onewire.py +++ b/decoders/onewire/onewire.py @@ -81,6 +81,7 @@ class Decoder(srd.Decoder): self.lnk_rise = 0 self.net_beg = 0 self.net_end = 0 + self.net_len = 0 # Network layer variables self.net_state = 'IDLE' self.net_cnt = 0 @@ -97,49 +98,85 @@ class Decoder(srd.Decoder): # check if samplerate is appropriate self.samplerate = metadata['samplerate'] if (self.options['overdrive']): - self.put(0, 0, self.out_ann, [ANN_LINK, ['NOTE: Sample rate checks assume overdrive mode.']]) + self.put(0, 0, self.out_ann, [ANN_LINK, + ['NOTE: Sample rate checks assume overdrive mode.']]) if (self.samplerate < 2000000): - self.put(0, 0, self.out_ann, [ANN_LINK, ['ERROR: Sampling rate is too low must be above 2MHz for proper overdrive mode decoding.']]) + self.put(0, 0, self.out_ann, [ANN_LINK, + ['ERROR: Sampling rate is too low must be above 2MHz for proper overdrive mode decoding.']]) elif (self.samplerate < 5000000): - self.put(0, 0, self.out_ann, [ANN_LINK, ['WARNING: Sampling rate is suggested to be above 5MHz for proper overdrive mode decoding.']]) + self.put(0, 0, self.out_ann, [ANN_LINK, + ['WARNING: Sampling rate is suggested to be above 5MHz for proper overdrive mode decoding.']]) else: - self.put(0, 0, self.out_ann, [ANN_LINK, ['NOTE: Sample rate checks assume normal mode only.']]) + self.put(0, 0, self.out_ann, [ANN_LINK, + ['NOTE: Sample rate checks assume normal mode only.']]) if (self.samplerate < 400000): - self.put(0, 0, self.out_ann, [ANN_LINK, ['ERROR: Sampling rate is too low must be above 400kHz for proper normal mode decoding.']]) + self.put(0, 0, self.out_ann, [ANN_LINK, + ['ERROR: Sampling rate is too low must be above 400kHz for proper normal mode decoding.']]) elif (self.samplerate < 1000000): - self.put(0, 0, self.out_ann, [ANN_LINK, ['WARNING: Sampling rate is suggested to be above 1MHz for proper normal mode decoding.']]) + self.put(0, 0, self.out_ann, [ANN_LINK, + ['WARNING: Sampling rate is suggested to be above 1MHz for proper normal mode decoding.']]) # The default 1-Wire time base is 30us, this is used to calculate sampling times. - if (self.options['cnt_normal_bit']): self.cnt_normal_bit = self.options['cnt_normal_bit'] - else: self.cnt_normal_bit = int(float(self.samplerate) * 0.000015) - 1 # 15ns - if (self.options['cnt_normal_presence']): self.cnt_normal_presence = self.options['cnt_normal_presence'] - else: self.cnt_normal_presence = int(float(self.samplerate) * 0.000075) - 1 # 75ns - if (self.options['cnt_normal_reset']): self.cnt_normal_reset = self.options['cnt_normal_reset'] - else: self.cnt_normal_reset = int(float(self.samplerate) * 0.000480) - 1 # 480ns - if (self.options['cnt_overdrive_bit']): self.cnt_overdrive_bit = self.options['cnt_overdrive_bit'] - else: self.cnt_overdrive_bit = int(float(self.samplerate) * 0.000002) - 1 # 2ns - if (self.options['cnt_overdrive_presence']): self.cnt_overdrive_presence = self.options['cnt_overdrive_presence'] - else: self.cnt_overdrive_presence = int(float(self.samplerate) * 0.000010) - 1 # 10ns - if (self.options['cnt_overdrive_reset']): self.cnt_overdrive_reset = self.options['cnt_overdrive_reset'] - else: self.cnt_overdrive_reset = int(float(self.samplerate) * 0.000048) - 1 # 48ns + if (self.options['cnt_normal_bit']): + self.cnt_normal_bit = self.options['cnt_normal_bit'] + else: + self.cnt_normal_bit = int(float(self.samplerate) * 0.000015) - 1 # 15ns + if (self.options['cnt_normal_presence']): + self.cnt_normal_presence = self.options['cnt_normal_presence'] + else: + self.cnt_normal_presence = int(float(self.samplerate) * 0.000075) - 1 # 75ns + if (self.options['cnt_normal_reset']): + self.cnt_normal_reset = self.options['cnt_normal_reset'] + else: + self.cnt_normal_reset = int(float(self.samplerate) * 0.000480) - 1 # 480ns + if (self.options['cnt_overdrive_bit']): + self.cnt_overdrive_bit = self.options['cnt_overdrive_bit'] + else: + self.cnt_overdrive_bit = int(float(self.samplerate) * 0.000002) - 1 # 2ns + if (self.options['cnt_overdrive_presence']): + self.cnt_overdrive_presence = self.options['cnt_overdrive_presence'] + else: + self.cnt_overdrive_presence = int(float(self.samplerate) * 0.000010) - 1 # 10ns + if (self.options['cnt_overdrive_reset']): + self.cnt_overdrive_reset = self.options['cnt_overdrive_reset'] + else: + self.cnt_overdrive_reset = int(float(self.samplerate) * 0.000048) - 1 # 48ns + + # calculating the slot size + self.cnt_normal_slot = int(float(self.samplerate) * 0.000060) - 1 # 60ns + self.cnt_overdrive_slot = int(float(self.samplerate) * 0.000006) - 1 # 6ns + + # organize values into lists + self.cnt_bit = [self.cnt_normal_bit , self.cnt_overdrive_bit ] + self.cnt_presence = [self.cnt_normal_presence, self.cnt_overdrive_presence] + self.cnt_reset = [self.cnt_normal_reset , self.cnt_overdrive_reset ] + self.cnt_slot = [self.cnt_normal_slot , self.cnt_overdrive_slot ] # Check if sample times are in the allowed range time_min = float(self.cnt_normal_bit ) / self.samplerate time_max = float(self.cnt_normal_bit+1) / self.samplerate if ( (time_min < 0.000005) or (time_max > 0.000015) ) : - self.put(0, 0, self.out_ann, [ANN_LINK, ['WARNING: The normal mode data sample time interval (%2.1fus-%2.1fus) should be inside (5.0us, 15.0us).' % (time_min*1000000, time_max*1000000)]]) + self.put(0, 0, self.out_ann, [ANN_LINK, + ['WARNING: The normal mode data sample time interval (%2.1fus-%2.1fus) should be inside (5.0us, 15.0us).' + % (time_min*1000000, time_max*1000000)]]) time_min = float(self.cnt_normal_presence ) / self.samplerate time_max = float(self.cnt_normal_presence+1) / self.samplerate if ( (time_min < 0.0000681) or (time_max > 0.000075) ) : - self.put(0, 0, self.out_ann, [ANN_LINK, ['WARNING: The normal mode presence sample time interval (%2.1fus-%2.1fus) should be inside (68.1us, 75.0us).' % (time_min*1000000, time_max*1000000)]]) + self.put(0, 0, self.out_ann, [ANN_LINK, + ['WARNING: The normal mode presence sample time interval (%2.1fus-%2.1fus) should be inside (68.1us, 75.0us).' + % (time_min*1000000, time_max*1000000)]]) time_min = float(self.cnt_overdrive_bit ) / self.samplerate time_max = float(self.cnt_overdrive_bit+1) / self.samplerate if ( (time_min < 0.000001) or (time_max > 0.000002) ) : - self.put(0, 0, self.out_ann, [ANN_LINK, ['WARNING: The overdrive mode data sample time interval (%2.1fus-%2.1fus) should be inside (1.0us, 2.0us).' % (time_min*1000000, time_max*1000000)]]) + self.put(0, 0, self.out_ann, [ANN_LINK, + ['WARNING: The overdrive mode data sample time interval (%2.1fus-%2.1fus) should be inside (1.0us, 2.0us).' + % (time_min*1000000, time_max*1000000)]]) time_min = float(self.cnt_overdrive_presence ) / self.samplerate time_max = float(self.cnt_overdrive_presence+1) / self.samplerate if ( (time_min < 0.0000073) or (time_max > 0.000010) ) : - self.put(0, 0, self.out_ann, [ANN_LINK, ['WARNING: The overdrive mode presence sample time interval (%2.1fus-%2.1fus) should be inside (7.3us, 10.0us).' % (time_min*1000000, time_max*1000000)]]) + self.put(0, 0, self.out_ann, [ANN_LINK, + ['WARNING: The overdrive mode presence sample time interval (%2.1fus-%2.1fus) should be inside (7.3us, 10.0us).' + % (time_min*1000000, time_max*1000000)]]) def report(self): pass @@ -161,14 +198,12 @@ class Decoder(srd.Decoder): self.lnk_state = 'WAIT FOR DATA SAMPLE' elif self.lnk_state == 'WAIT FOR DATA SAMPLE': # Sample data bit - if (self.lnk_overdrive): cnt = self.cnt_overdrive_bit - else : cnt = self.cnt_normal_bit - if (self.samplenum - self.lnk_fall == cnt): + if (self.samplenum - self.lnk_fall == self.cnt_bit[self.lnk_overdrive]): self.lnk_bit = owr & 0x1 self.lnk_event = "DATA BIT" if (self.lnk_bit): self.lnk_state = 'WAIT FOR FALLING EDGE' else : self.lnk_state = 'WAIT FOR RISING EDGE' - self.put(self.lnk_fall, self.samplenum, self.out_ann, [ANN_LINK, ['BIT: %01x' % self.lnk_bit]]) + self.put(self.lnk_fall, self.cnt_bit[self.lnk_overdrive], self.out_ann, [ANN_LINK, ['BIT: %01x' % self.lnk_bit]]) elif self.lnk_state == 'WAIT FOR RISING EDGE': # The end of a cycle is a rising edge. if (owr == 1): @@ -179,9 +214,9 @@ class Decoder(srd.Decoder): # Send a reset event to the next protocol layer. self.lnk_event = "RESET" self.lnk_state = "WAIT FOR PRESENCE DETECT" - self.put(self.lnk_fall, self.samplenum, self.out_proto, ['RESET']) - self.put(self.lnk_fall, self.samplenum, self.out_ann, [ANN_LINK , ['RESET']]) - self.put(self.lnk_fall, self.samplenum, self.out_ann, [ANN_NETWORK , ['RESET']]) + self.put(self.lnk_fall, self.lnk_rise, self.out_proto, ['RESET']) + self.put(self.lnk_fall, self.lnk_rise, self.out_ann, [ANN_LINK , ['RESET']]) + self.put(self.lnk_fall, self.lnk_rise, self.out_ann, [ANN_NETWORK , ['RESET']]) # Reset the timer. self.lnk_fall = self.samplenum elif ((self.samplenum - self.lnk_fall > self.cnt_overdrive_reset) and (self.lnk_overdrive)): @@ -190,9 +225,9 @@ class Decoder(srd.Decoder): # Send a reset event to the next protocol layer. self.lnk_event = "RESET" self.lnk_state = "WAIT FOR PRESENCE DETECT" - self.put(self.lnk_fall, self.samplenum, self.out_proto, ['RESET OVERDRIVE']) - self.put(self.lnk_fall, self.samplenum, self.out_ann, [ANN_LINK , ['RESET OVERDRIVE']]) - self.put(self.lnk_fall, self.samplenum, self.out_ann, [ANN_NETWORK , ['RESET OVERDRIVE']]) + self.put(self.lnk_fall, self.lnk_rise, self.out_proto, ['RESET OVERDRIVE']) + self.put(self.lnk_fall, self.lnk_rise, self.out_ann, [ANN_LINK , ['RESET OVERDRIVE']]) + self.put(self.lnk_fall, self.lnk_rise, self.out_ann, [ANN_NETWORK , ['RESET OVERDRIVE']]) # Reset the timer. self.lnk_fall = self.samplenum # Otherwise this is assumed to be a data bit. @@ -200,9 +235,7 @@ class Decoder(srd.Decoder): self.lnk_state = "WAIT FOR FALLING EDGE" elif self.lnk_state == 'WAIT FOR PRESENCE DETECT': # Sample presence status - if (self.lnk_overdrive): cnt = self.cnt_overdrive_presence - else : cnt = self.cnt_normal_presence - if (self.samplenum - self.lnk_rise == cnt): + if (self.samplenum - self.lnk_rise == self.cnt_presence[self.lnk_overdrive]): self.lnk_present = owr & 0x1 # Save the sample number for the falling edge. if not (self.lnk_present) : self.lnk_fall = self.samplenum @@ -211,8 +244,8 @@ class Decoder(srd.Decoder): if (self.lnk_present) : self.lnk_state = 'WAIT FOR FALLING EDGE' else : self.lnk_state = 'WAIT FOR RISING EDGE' present_str = "False" if self.lnk_present else "True" - self.put(self.lnk_fall, self.samplenum, self.out_ann, [ANN_LINK , ['PRESENCE: ' + present_str]]) - self.put(self.lnk_fall, self.samplenum, self.out_ann, [ANN_NETWORK, ['PRESENCE: ' + present_str]]) + self.put(self.samplenum, 0, self.out_ann, [ANN_LINK , ['PRESENCE: ' + present_str]]) + self.put(self.samplenum, 0, self.out_ann, [ANN_NETWORK, ['PRESENCE: ' + present_str]]) else: raise Exception('Invalid lnk_state: %d' % self.lnk_state) @@ -228,7 +261,8 @@ class Decoder(srd.Decoder): elif (self.net_state == "COMMAND"): # Receiving and decoding a ROM command if (self.onewire_collect(8)): - self.put(self.net_beg, self.net_end, self.out_ann, [ANN_NETWORK, ['ROM COMMAND: 0x%02x \'%s\'' % (self.net_data, rom_command[self.net_data])]]) + self.put(self.net_beg, self.net_len, self.out_ann, [ANN_NETWORK, + ['ROM COMMAND: 0x%02x \'%s\'' % (self.net_data, rom_command[self.net_data])]]) if (self.net_data == 0x33): # READ ROM self.net_state = "GET ROM" elif (self.net_data == 0x0f): # CONDITIONAL READ ROM @@ -252,21 +286,21 @@ class Decoder(srd.Decoder): # family code (1B) + serial number (6B) + CRC (1B) if (self.onewire_collect(64)): self.net_rom = self.net_data & 0xffffffffffffffff - self.put(self.net_beg, self.net_end, self.out_ann, [ANN_NETWORK, ['ROM: 0x%016x' % self.net_rom]]) + self.put(self.net_beg, self.net_len, self.out_ann, [ANN_NETWORK, ['ROM: 0x%016x' % self.net_rom]]) self.net_state = "TRANSPORT" elif (self.net_state == "SEARCH ROM"): # A 64 bit device address is searched for # family code (1B) + serial number (6B) + CRC (1B) if (self.onewire_search(64)): self.net_rom = self.net_data & 0xffffffffffffffff - self.put(self.net_beg, self.net_end, self.out_ann, [ANN_NETWORK, ['ROM: 0x%016x' % self.net_rom]]) + self.put(self.net_beg, self.net_len, self.out_ann, [ANN_NETWORK, ['ROM: 0x%016x' % self.net_rom]]) self.net_state = "TRANSPORT" elif (self.net_state == "TRANSPORT"): # The transport layer is handled in byte sized units if (self.onewire_collect(8)): - self.put(self.net_beg, self.net_end, self.out_ann, [ANN_NETWORK , ['TRANSPORT: 0x%02x' % self.net_data]]) - self.put(self.net_beg, self.net_end, self.out_ann, [ANN_TRANSPORT, ['TRANSPORT: 0x%02x' % self.net_data]]) - self.put(self.net_beg, self.net_end, self.out_proto, ['transfer', self.net_data]) + self.put(self.net_beg, self.net_len, self.out_ann, [ANN_NETWORK , ['TRANSPORT: 0x%02x' % self.net_data]]) + self.put(self.net_beg, self.net_len, self.out_ann, [ANN_TRANSPORT, ['TRANSPORT: 0x%02x' % self.net_data]]) + self.put(self.net_beg, self.net_len, self.out_proto, ['transfer', self.net_data]) # TODO: Sending translort layer data to 1-Wire device models else: raise Exception('Invalid net_state: %s' % self.net_state) @@ -277,13 +311,14 @@ class Decoder(srd.Decoder): if (self.lnk_event == "DATA BIT"): # Storing the sampe this sequence begins with if (self.net_cnt == 1): - self.net_beg = self.samplenum + self.net_beg = self.lnk_fall self.net_data = self.net_data & ~(1 << self.net_cnt) | (self.lnk_bit << self.net_cnt) self.net_cnt = self.net_cnt + 1 # Storing the sampe this sequence ends with # In case the full length of the sequence is received, return 1 if (self.net_cnt == length): - self.net_end = self.samplenum + self.net_end = self.lnk_fall + self.cnt_slot[self.lnk_overdrive] + self.net_len = self.net_end - self.net_beg self.net_data = self.net_data & ((1<